Dual Element Control Switch WPW10434452

Hello Alex, thank you for writing. Replacing the Dual Infinite Switch may fix the issue, but we will need the model number for the stove to see if this is the correct replacement or which one is. We look forward to hearing back from you.

Hello Phil, thank you for your question. The switch for that unit is PartSelect Number PS11740783. Please enter the part number into the site for current price and availability. Good luck with your repair!

Hello Simon, thank you for inquiring. Yes, replacing this Dual Infinite Control Switch for your model should fix the issue. Good luck with your repair!

Hi Jeff, Thank you for your question. The part number listed under your model number for the infinite switch for the dual burner is WPW10434452. I hope this helps. Thank you and have a great day!

Hello Craig, thank you for your question. When a burner remains on high and can't be controlled, the most likely issue is the switch. We would recommend replacing PartSelect Number: PS11754687. Good luck with your repair!

Hello Andrew, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PS11740783. Have a great day!

Hi Alex, Thank you for your great question. Yes, if your burner is only working on one setting, then the dual infinite control switch will resolve this issue. I hope this helps.

Hi Walter, thank you for your question. There are a couple of parts that could cause this issue specifically. You will need a multi meter to be able to test the parts. The first part you will want to check is your radiant element. It should be reading between 0 - 120 ohms to be working correctly. The other part to check would be your infinite (or surface burner) switch. When you remove that part from the appliance, connect each probe from your multi meter to the prongs and then turn the switch to an on position. If you get no continuity then the switch is the issue. I hope that helps. Good luck with your repair.

Hello Helen, thank you for your question. The left front element is PartSelect Number PS11749881. The switch for that element is PartSelect Number PS11754687. Good luck with your repair!

Hello Patrick, Thank you for your question. There are a couple of parts that could cause this issue specifically. You will need a multi meter to be able to test the parts. The first part you will want to check is your radiant element. It should be reading between 0 - 120 ohms to be working correctly. The other part to check would be your infinite (or surface burner) switch. When you remove that part from the appliance, connect each probe from your multi meter to the prongs and then turn the switch to an on position. If you get no continuity then the switch is the issue. Hope this helps!