Whirlpool Dishwasher Caps and Lids

Whirlpool Appliance Parts
Shop By Part Type

Popular Whirlpool Dishwasher Caps and Lids

Your Price
$35.18
  In Stock
Rinse-Aid Dispenser Cap
★★★★★
★★★★★
31 Reviews
PartSelect Number PS11746426
Manufacturer Part Number WP8558307
The rinse aid cap (sometimes referred to as the dispenser cap), covers the rinse aid dispenser on the dishwasher door. If your dishwasher will not dispense detergent, or it is leaking detergent, there could be an issue with the rinse aid cap. Check the cap and its gasket for any damage or melting. If the cap has melted or it is not sealing the dispenser properly, the part should be replaced right away. This rinse aid cap comes with the gasket, so you should discard the existing gasket and rinse aid cap at the same time. The repair is relatively straightforward, and requires no tools.
Fixes these symptoms
  • Door latch failure
  • Leaking
  • Not cleaning dishes properly
  • See more...
Your Price
$37.85
  In Stock
Rinse Aid Cap
★★★★★
★★★★★
11 Reviews
PartSelect Number PS11755938
Manufacturer Part Number WPW10524919
This part holds the rinse aid liquid in the dispenser until the timer activates the rinse cycle.
Fixes these symptoms
Your Price
$35.41
  In Stock
Rinse Aid Cap
★★★★★
★★★★★
15 Reviews
PartSelect Number PS11748135
Manufacturer Part Number WPW10077881
This part holds the rinse aid liquid in the dispenser until the timer activates the rinse cycle.
Fixes these symptoms
  • Door latch failure
  • Leaking
  • Not cleaning dishes properly
  • See more...
Your Price
$14.15
  In Stock
Rinse Aid Cap
★★★★★
★★★★★
13 Reviews
PartSelect Number PS11741341
Manufacturer Part Number WP3378134
This cap does not require the use of a o-ring seal.
Fixes these symptoms
  • Leaking
  • Not cleaning dishes properly
  • Not drying dishes properly
  • See more...
Your Price
$39.58
  In Stock
Rinse Aid Cap
★★★★★
★★★★★
11 Reviews
PartSelect Number PS11755939
Manufacturer Part Number WPW10524920
This is a replacement cap for the detergent/rinse aid dispenser. If the rinse aid cap is damaged or missing, you may notice too much rinse aid in the dishwasher. The cap simply screws in to the dispenser, so if your cap is damaged you can simply screw it out, then screw in the new one. The rinse aid cap is approximately 2 inches in diameter and is sold individually. This is an OEM part, directly from the manufacturer.
Fixes these symptoms
  • Leaking
  • Not cleaning dishes properly
  • Not drying dishes properly
  • See more...
Your Price
$19.75
  In Stock
Tub Cap
PartSelect Number PS11703426
Manufacturer Part Number W10795980
The plastic button covers the sharp ends of screws along the edge of the dishwasher tub. Sold individually.
Fixes these symptoms
Your Price
$37.72
  In Stock
Rinse Aid Cap
★★★★★
★★★★★
10 Reviews
PartSelect Number PS11746567
Manufacturer Part Number WP8564929
This rinse aid cap or fill cap is for your dishwasher and it screws into the jet dry dispenser. Sometimes the cap can become loose and fall out, which can cause it to melt from the heater. If your cap is damaged or missing, this is the part you will need to replace it. It is made of white plastic and is a little more than an inch in diameter. This rinse aid cap is sold individually.
Fixes these symptoms
  • Leaking
  • Not cleaning dishes properly
  • Not drying dishes properly
  • See more...
Your Price
$29.95
  In Stock
Dispenser Cap
★★★★★
★★★★★
1 Review
PartSelect Number PS11746156
Manufacturer Part Number WP8533380
This is the cap for your rinse aid dispenser.
Fixes these symptoms
Your Price
$54.78
  In Stock
Cover
★★★★★
★★★★★
1 Review
PartSelect Number PS11755008
Manufacturer Part Number WPW10455272
Fixes these symptoms
Your Price
$55.66
  In Stock
Rinse Aid Cap - Gray
★★★★★
★★★★★
4 Reviews
PartSelect Number PS11755941
Manufacturer Part Number WPW10524922
This is the replacement rinse aid cap for your dishwasher. It is made of gray plastic and is approximately 2 inches in diameter. This rinse aid cap screws into the rinse aid assembly and prevents leaks. Sometimes the cap can become loose and fall out, which can cause it to be melted by the heater. If your cap is damaged or missing, this is the part you will need to replace it. This rinse cap is an authentic OEM part sourced directly from the manufacturer and is sold individually.

Related Parts