My Orders
Roper Range Switches
GET YOUR OFFICIAL Roper PARTS TO ENSURE VICTORY
Popular Roper Range Switches
This control switch controls the stove top 8" surface burner. 8.9- 11.0 amp. This surface burner element switch is for an 8-inch surface burner on an oven, stove, or range. The element switch controls the heat of the surface burner. Disconnect power to your range before completing this repair because you will be working closely with electrical circuits. Remove the screws from back panel and the console, and remove the console to expose the switch. It is recommended to check for overheating or arcing on the wiring harness in case they need to be replaced as well. The harness that connects to the switch features a slip-on terminal for easy installation.
This control switch controls the stove top 8" surface burner. 8.9- 11.0 amp. This surface burner element switch is for an 8-inch surface burner on an oven, stove, or range. The element switch controls the heat of the surface burner. Disconnect power to your range before completing this repair because you will be working closely with electrical circuits. Remove the screws from back panel and the console, and remove the console to expose the switch. It is recommended to check for overheating or arcing on the wiring harness in case they need to be replaced as well. The harness that connects to the switch features a slip-on terminal for easy installation.
If your stove burner won’t heat up, stays on high, or won’t adjust, this switch might be the fix. It controls the heat for 6-inch electric burners and fits many Whirlpool, Maytag, and KitchenAid ranges. Easy to install—just be sure to unplug the appliance or flip the breaker first. Sold individually.
If your stove burner won’t heat up, stays on high, or won’t adjust, this switch might be the fix. It controls the heat for 6-inch electric burners and fits many Whirlpool, Maytag, and KitchenAid ranges. Easy to install—just be sure to unplug the appliance or flip the breaker first. Sold individually.
This switch helps you control the heat on your stove’s 8-inch burner. If your burner isn’t heating up or won’t adjust properly, this part could be the fix. It works by sending the right amount of power to the burner when you turn the knob. It’s made to fit many models and is easy to install—just unplug your stove first and wear gloves for safety.
This switch helps you control the heat on your stove’s 8-inch burner. If your burner isn’t heating up or won’t adjust properly, this part could be the fix. It works by sending the right amount of power to the burner when you turn the knob. It’s made to fit many models and is easy to install—just unplug your stove first and wear gloves for safety.
Keep your washer or dryer running safely with this easy-to-install lid or door switch kit. It stops the machine from working when the door is open, helping prevent spills and accidents. Compatible with many models, this small but important part fits neatly inside your appliance and comes with everything you need for installation. Just unplug your machine, swap out the old switch, and you're good to go. It’s about 2.5 inches long and blends in with most interiors.
Keep your washer or dryer running safely with this easy-to-install lid or door switch kit. It stops the machine from working when the door is open, helping prevent spills and accidents. Compatible with many models, this small but important part fits neatly inside your appliance and comes with everything you need for installation. Just unplug your machine, swap out the old switch, and you're good to go. It’s about 2.5 inches long and blends in with most interiors.
This part carries 5.2-6.6 amps.
This part carries 5.2-6.6 amps.
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
This switch helps your oven heat properly by letting you choose between bake, broil, and convection settings. If your oven isn’t heating, cooks unevenly, or won’t turn on, the switch might need replacing. It’s a 15-amp, 240-volt part that controls how your oven heats. The knob isn’t included, but you can reuse your current one or buy it separately. Swapping out the switch is a straightforward fix that can restore your oven’s performance.
This switch helps your oven heat properly by letting you choose between bake, broil, and convection settings. If your oven isn’t heating, cooks unevenly, or won’t turn on, the switch might need replacing. It’s a 15-amp, 240-volt part that controls how your oven heats. The knob isn’t included, but you can reuse your current one or buy it separately. Swapping out the switch is a straightforward fix that can restore your oven’s performance.
What this part fixes:
- Element will not heat
- Little to no heat when baking
- Will Not Start
When the gas burner valve knob is depressed and turned, this part creates a spark that lights the gas and starts the burner.
When the gas burner valve knob is depressed and turned, this part creates a spark that lights the gas and starts the burner.
This switch controls the stove top surface burner.
This switch controls the stove top surface burner.
This part allows you to select the bake or broil function for your oven.
This part allows you to select the bake or broil function for your oven.