Refrigerator Drawers and Glides | Replacement Parts & Accessories | PartSelect

Popular Refrigerator Drawers and Glides

Refrigerator Crisper Drawer with Humidity Control – Part Number: WP2188656
Your Price
CAD$78.47
Refrigerator Crisper Drawer with Humidity Control
PartSelect Number PS11739119
Manufacturer Part Number WP2188656
Fixes these symptoms
Clicking sound
Door Sweating
Door won’t open or close

See more...
Crisper Cover Support - Front – Part Number: 241993101
Your Price
CAD$8.66
Crisper Cover Support - Front
PartSelect Number PS2358880
Manufacturer Part Number 241993101
This crisper cover front support is used to keep the crisper shelf in place and may need replacing if the door will not open or close. This white, OEM part measures roughly 1 inch in diameter and can be used for the front and the rear support, as designed by the manufacturer, and mounts to the inside cabinet wall. Replacing this part is an easy repair, and will require a small flat blade screwdriver, a putty knife, and a soft hammer. Remove the crisper and shelf from the refrigerator before replacing the support. The crisper cover front support is held in place with a locking pin. To remove the old part, you will first need to push the pin into the interior of the cabinet using the screwdriver, and then you can pull the support out with a putty knife. If you cannot get the pin out you can use a flat-blade screwdriver to push it down and out of sight and it will not harm anything in your refrigerator After removing the pin and attaching the new support, simply use the soft hammer to lock the new pin in place.
Fixes these symptoms
Door won’t open or close


Drawer Support Rail - Right Side – Part Number: 240530701
Your Price
CAD$51.91
Drawer Support Rail - Right Side
PartSelect Number PS430917
Manufacturer Part Number 240530701
This manufacturer-certified drawer support rail supports the right side of the sliding drawer. It is a track that helps the drawer slide open and closed with ease. If you are having trouble opening or closing your fresh food drawer, check the support rails for any blockage, or visible damage. If the rail is damaged, it should be replaced to ensure no further damage is done to the drawer itself. The repair is straightforward: unscrew and remove the existing support rail, then fasten the new rail in place. This genuine OEM replacement part is made of plastic and is white in color. NOTE: This part is sold separately from the left side drawer support rail. The part measures approximately 16 inches long by 1 inch high.
Fixes these symptoms
Door won’t open or close


Refrigerator Crisper Pan – Part Number: 240337103
Your Price
CAD$122.47
Refrigerator Crisper Pan
PartSelect Number PS429854
Manufacturer Part Number 240337103
The crisper pan, also known as a vegetable drawer, is used to store your vegetables and fruit at a humidity level that will help keep them fresh longer. The pan is clear and made of plastic. This is a genuine OEM part.
Fixes these symptoms
Door won’t open or close
Leaking


Drawer Support Rail - Left Side – Part Number: 240530601
Your Price
CAD$51.91
Drawer Support Rail - Left Side
PartSelect Number PS430916
Manufacturer Part Number 240530601
This drawer rail supports the left hand side of the sliding drawer.
Fixes these symptoms
Door won’t open or close


Refrigerator Crisper Drawer With Handle – Part Number: WP2188664
Your Price
CAD$149.93
Refrigerator Crisper Drawer With Handle
PartSelect Number PS11739122
Manufacturer Part Number WP2188664
This OEM, clear convertible meat drawer can be used to store meats or vegetables and is designed for the lower portion of your refrigerator, generally. It has its own cold air duct to allow cold air from the freezer to flow into the drawer. You could have a broken or faulty drawer if you find that the food is kept within is spoiling or drying out quickly. The drawer should slide open and closed with ease. If your drawer will not easily slide open or closed, check the tracks that the drawer slides on. If the tracks are not damaged, the drawer itself could be at fault and should be replaced. Inspect it for visible damage like cracking or warping, which should be obvious. This part measures approximately 16 7/16 inches wide x 14 5/16 inches deep x 7 5/8 inches high and is a genuine OEM replacement part. It is sold individually. Note that there are several different types and options for the lower vegetable and meat drawers for your refrigerator, and you should check your user manual carefully to ensure that this is the drawer you are looking for.
Fixes these symptoms
Door won’t open or close


Pantry End Cap Kit, LH and RH – Part Number: W10874836
Your Price
CAD$35.82
Pantry End Cap Kit, LH and RH
PartSelect Number PS11738134
Manufacturer Part Number W10874836
This manufacturer-approved Refrigerator Pantry End Cap Kit, also known as the Refrigerator Drawer Support, is a kit containing all parts of the Pantry End Cap. It snaps into place on the appliance’s pantry drawer to help contain the items inside and to keep your refrigerator door from sliding all the way out. It is rated as "medium" difficulty to install, is constructed of plastic and comes in white. If broken or missing, the pantry drawer will not stay in place and the part should be replaced. Refer to your user manual and model number to ensure this is the correct part for you. This kit includes both the right and left side end caps, as well as the pins that will hold them in place. To replace an end cap, remove the three screws holding it in place. Then, remove the pin and end cap, replacing the old end cap with the new end cap. In the past, the left and right end caps were sold separately, but the part has been updated and now includes both sides. The part is sold as a kit, and unfortunately, as such none of the parts are available individually.
Fixes these symptoms
Door won’t open or close
Fridge too cold
Noisy

See more...
Crisper Glass Shelf Insert – Part Number: 240350608
Your Price
CAD$97.32
Crisper Glass Shelf Insert
PartSelect Number PS429963
Manufacturer Part Number 240350608
Glass only. This glass insert measures 23.82 x 15.50-in. This is an authentic Frigidaire replacement part. The crisper shelf insert is designed by the manufacturer for use in refrigerators. This part is made of glass, and is placed over the crisper pan drawers. No tools are required when replacing this item. Simply remove the old part and slot the new one into place. This item is sold individually.
Fixes these symptoms
No Symptoms for this part
Refrigerator Crisper Drawer – Part Number: 240351061
Your Price
CAD$120.78
Refrigerator Crisper Drawer
PartSelect Number PS2361214
Manufacturer Part Number 240351061
This clear plastic crisper drawer is for side-by-side refrigerators. It is sold individually and sourced right from the original manufacturer. Please note that the new pan does not have the humidity control slide, and this component is now sold separately. The crisper drawer is designed to store produce at a humidity level that ensures your food is kept fresh for as long as possible. It is commonly replaced because it is cracked, warped, or stained. For this simple tool-free repair, start by opening your refrigerator door and sliding out the old crisper drawer. Take your new crisper drawer and align the thin ridge on the top of the drawer with the track located inside the refrigerator. Slide the new part into place and your repair is complete.
Fixes these symptoms
Door won’t open or close


Refrigerator Center Crisper Drawer Slide Rail - White – Part Number: WPW10671238
Your Price
CAD$57.11
Refrigerator Center Crisper Drawer Slide Rail - White
PartSelect Number PS11757048
Manufacturer Part Number WPW10671238
Fixes these symptoms
Door won’t open or close
Fridge and Freezer are too warm
Leaking

See more...