
Troubleshooting
This part fixes the following symptoms:
Door won’t open or close | Noisy | Leaking | Fridge too cold
This part works with the following products:
Refrigerator.
This part works with the following products:
Kenmore, Maytag, Amana, Whirlpool.
Part# WPW10671238 replaces these:
AP6023702, 12530701, 12530701N, 67001057, 8208354, W10671238, W10671238N
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- 2
- 3
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Nancy
September 9, 2017
This was the worlds easiest repair i have ever done! Your part was the exact fit, came incredibly fast. Everything was wonderful, thank you for making is so convenient for us. Very grateful for partselect.
For model number WPW10671238

Hi Nancy,
Thank you for your kind words, we enjoyed hearing from you. We are happy the repair went well for you. If there is anything we can do for you in the future please do hesitate to ask. Have a great day!
26 people found this helpful.
Was this helpful?
Thank you for voting!
Bob
December 16, 2017
I replaced the center crisper rail and it broke again in about a week . Is there a center support bracket that is supposed to help hold the front of the drawers up. If there is i cant find it in parts list.
For model number ABB2222FEQ

Hello Bob, Thank you for your inquiry. The center crisper rail is just supposed to snap into place in the frame as shown in our video for this part, there is no other bracket to support this part. Good luck with your repair!
13 people found this helpful.
Was this helpful?
Thank you for voting!
June Stoebenau
January 23, 2018
Does this center crisper rail really fit my refrigerator? Your description gives different dimensions , even as much as 2 inches wide and too long. My broken one is only 1 1/2 inches wide and 12 1/2 " long. Is it a newer version or is it perhaps stronger?
For model number MBF1958XEW6

Hello June, thank you for your question. The part that is specifically listed as the center crisper rail for your model number MBF1958XEW6 is part number PS11757048. This is a substitution part from the original, so it may differ slightly in appearance but is the authorized replacement part for your unit. I hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Colette
November 21, 2019
Hello, I seem to have an older Kenmore fridge and was wondering if you have a crisper drawer slide rail compatible that would fit my fridge. My piece broke. My model # 596.69912001 and the dimensions are about 12.5 length x 2 inches height x 1.5 inches wide. Thanks Colette
For model number 59669912011

Hello Colette, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11757048. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Sam
February 17, 2020
This is regarding the slide rail mft number wp10671238. The back of the slider rail that is inserted in the whole in the back has broken off. It is flush broken and not able to take it out. What do you suggest
For model number MF12269FRB00

Hello and thank you for writing.
For your convenience, we have attached the link to our repair video, we think they might help you out. We hope this helps. Good luck with your repair.
https://www.youtube.com/watch?v=UJLyl6500do

2 people found this helpful.
Was this helpful?
Thank you for voting!
Kathy
August 3, 2018
I would like the part number that goes in front and between the crisper drawers under the crisper shelf frame. It supports the center of the front of the frame. My new frig has the cut outs to put it in, but it did not have one. The center of this crisper frame is very weak
For model number abb2224brm

Hello Kathy, Thank you for your inquiry. The center crisper rail for your model is the one you listed, part# WPW10671238. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
BOB
April 26, 2019
Hi, I have Whirlpool EB9FVHRWS01. Will this fit with it please? Thanks.
For model number EB9FVHRWS01

Hello Bob, thank you for your question. Yes, this Center Crisper Rail part PS11757048 is the correct replacement for your model.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Sara
August 21, 2019
Is there a center support for the front end of the crisper rail (between the drawers)?
For model number Not sure. MAYTAG french door/freezer bottom

Good Day Sara. In order for us to assist you we will need you to provide us with the model number for your unit. If you are having difficulty locating your model number we would recommend reaching out to the manufacturer as they should be able to assist you finding it. Best Regards.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Thomas
November 7, 2018
I am working on a Kenmore french door refrigerator and tis short cycling it cut out when the temperature is about 56 in freeze come on at about 60 do i need to replace a temp sensor ore a control board i replace the relay, same thing
For model number 59672003014

Hello Thomas, thank you for your question. There are no sensors listed for this model, but from the information provided it sounds like it may be an issue with the board in the unit or perhaps the run capacitor. This part provides the voltage or energy current required to start the compressor and keep it running. It allows the compressor in your appliance to easily cycle on and off. Doing so enables the appliance to effortlessly maintain its internal temperature. If the capacitor is faulty your refrigerator or freezer might be too warm, or you may notice the compressor will hum, but it will not run. When replacing your capacitor, you should check the old one for any signs of damage, overheating, or arcing, as that may suggest there is a bigger problem with your appliance. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Sara
December 7, 2022
Will this part work with this model of fridge?
Thank you!
For model number WRF555SDFZ09

Hi Sara, thank you for the question. The part number you have provided is not compatible with your model number. The compatible part number is PS11752912. Glad to be of help! If you need help placing an order, customer service is open 7 days a week. Thanks again for your great question.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- 2
- 3
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Part Videos
Replacing your Kenmore Refrigerator Refrigerator Center Crisper Drawer Slide Rail - White

Customer Repair Stories
Average Repair Rating: 4.8 / 5.0, 58 reviews.
What's this?
- < Prev
- 1
- 2
- 3
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Cracked & Snapped Center Crisper Rail
A very easy fix took all of five minutes
Other Parts Used:
-
Ruth from Roxbury, MA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
221 of 236 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
crisper drawers were off center rail due to c.r fracture
removed old rail,lifted glass panel above and inserted new rail-voila!!done.
Other Parts Used:
-
albert from quakertown, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
42 of 46 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Crisper frame and rail were damaged
I removed the glass top and then rail and frame.
I had to remove the gaskets from the old frame and put them on the new one.
The steel support and the slide mechanisms were difficult to remove. I needed a screwdriver to do this.
Some directions would have helped here.
It was easier to snap them back into the new frame.
I set the frame and then rail back into the refrigerator,
replaced the glass.
I had to remove the gaskets from the old frame and put them on the new one.
The steel support and the slide mechanisms were difficult to remove. I needed a screwdriver to do this.
Some directions would have helped here.
It was easier to snap them back into the new frame.
I set the frame and then rail back into the refrigerator,
replaced the glass.
Other Parts Used:
-
Eric from Brooklyn, NY
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
32 of 46 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken Crisper Rail
Removed the drawers and shelf unit above the shelves. Installed the new rail and put the shelf unit and drawers back in. Less than 5 minute repair. Very fast delivery of part and reasonable pricing.
Other Parts Used:
-
Linda from Turner, MT
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
24 of 25 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
center rail to hold drawers straight was broken
Took drawers out, inserted the rail and put the drawers back in and voila. Fixed.
Other Parts Used:
-
Georgette from Webster, MA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
16 of 18 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
center bar to hold crispers was broken
I was easily able to find the part using the online search. I order the part and it arrived in about two days. Installing the part meant pulling out the two crisper drawers, emptying the shelf above the crispers, removing two glass shelf plates, inserting the new part, replacing the glass plates, replacing the food on the shelf and sliding in the two crisper drawers. All in all, about 3 minutes.
Other Parts Used:
-
Robert from Evanston, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
12 of 13 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ladder hooks and center crisper rail broken
I removed the crisper drawers, glass shelf, and frame assembly to install the ladder hook. Before reinstalling the glass shelf on top of the crisper frame, I installed the center crisper rail.
Thank goodness for websites like this!
Thank goodness for websites like this!
Other Parts Used:
-
Martha from Janesville, WI
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
11 of 15 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Breaks relatevely often when you accidently have either draws overloaded or open both of them at the same time
You need to lift up the glass part and simply fit it the center rail in, very simple
Other Parts Used:
-
Aggie from Prospect Hts, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
9 of 11 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Busted shelf / divider
Repair was a piece of cake. My only wish would have been a little more informed on a few other parts I could have replaced as well. It obviously would have increased my cost, but would have simplified the install process, and still would have been cheaper then calling a service guide. I would recommend buying and installing the new gaskets when doing this. And possibly the steel support bar that goes threw the plastic shelf. Removing that bar was the most difficult task, difficult only that if you used to much force, SNAP!! and then your pissed! and have to start all over.
Other Parts Used:
-
Rocco from Elmhurst, IL
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
9 of 14 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Center crisper rail broken and crisper frame cracked
No instructions came with the parts, however, on the website where we ordered the parts was a video that walked you through every step. We followed the video and had the repair done in no time.
Other Parts Used:
-
Bonnie from PENSACOLA, FL
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
8 of 9 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- 2
- 3
- Next >
Customer Reviews
Filter By Rating:
- < Prev
- 1
- 2
- 3
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
GREG F - 17 days ago
Verified Purchase
Gret part
Fast service
Laura D - 18 days ago
Verified Purchase
Easy Repair
The part was available and delivered as indicated. The fridge is now functioning 100%, making it easy to store my vegetables, fruits and deli meats. Thank you PartSelect for making it easy!
Alan C - 20 days ago
Verified Purchase
Video was helpful, thanks!
Part shipment was sent out timely and worked as expected.
Jarvis P - 24 days ago
Verified Purchase
EASY repair - great part - like new again.
Great part, fast service, highly recommended.
Julie S - May 6, 2023
Verified Purchase
Easy Repair, replaced quickly.
We were easily able to identify the part we needed to replace in our refrigerator and it came very quickly. The only thing I would have preferred would have been if the purolator could have dropped the part off at the local post office. I live in a small town and was not home during the day, as most people aren't. The delivery person had to take it back to the nearest city for pick up. Not a big deal, but was a nuisance. I would order from this company again if needing a part.
Don G - April 26, 2023
Verified Purchase
Easy repair
Pars came on time and worked perfectly.
Kamen Stoykov P - March 17, 2023
Verified Purchase
Perfect fit, fast delivery
The part came fast, perfect match for the model, easy repair.
Cheryl C - March 10, 2023
Verified Purchase
Easy Repair
Quick delivery and thanks to video provided - an easy, simple repair
Karen D - March 10, 2023
Verified Purchase
Excellent service.
Excellent service from Partselect. The crisper bins are just what I wanted. However the divider broke in the same spot as my old one, within a week. I won’t be wasting money buying another one.
Barb K - March 9, 2023
Verified Purchase
Easy repair, fit properly
The part was perfect and arrived quickly. Would highly recommend to friends. Thank you so much.
- < Prev
- 1
- 2
- 3
- Next >
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11757048
Manufacturer Part Number: WPW10671238
Manufacturer Part Number: WPW10671238
Brand
Model Number
Description
