The igniter does not come with wire nuts. *** Please NOTE: The igniter connector may need to be cut off and wires spliced to the range wiring with the porcelain wire nuts.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Little to no heat when baking | Gas igniter glows | but will not light | Oven not heating evenly
This part works with the following products:
Range.
This part works with the following products:
General Electric, Hotpoint, Kenmore.
Part# WB16K10035 replaces these:
AP3205796, 1021861, WB16K10035, WB16K29
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
5.0
Filter By Rating:
5 Stars
1
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
David G - July 31, 2019
Verified Purchase
Repair was simple to carry out, andthe part worked as expected
Part arrived in 36 hours after order placed, never known such fast service!
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.1 / 5.0, 6 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
On Thankgiving Day with company coming and the turkey in the oven, my kenmore stove decided to act up. The oven burner started to smell awful and start carboning up due to improper burning at the burner tube. We then abandoned our attempts to roast the turkey in the oven for that day.
After removing the bake tube and ignitor assembly the following day for a close inspection which involved removal of the bottom pan, racks etc. and disconnecting the ignitor / tube assembly by unscrewing the sheet-metal screws holding them in place, I discovered that the ignitor had burned a hole in the bake tube which could not be seen without unscrewing the ignitor from the tube first. This caused the air / propane ratio to dramaticly change causing the oven to have a strong odor, start to carbon up the bake tube and effect the temperatures and cook time and the possibility of monoxide fumes effecting the chef. The parts that partselect.com supplied, which were in stock ,worked perfectly and saved my Christmas goose. Happy Holidays!
Pull plug and shut off gas! The lower oven burner is held in with two rear and one front screws. I removed the top floor of the oven (two hand tightened screws at the back), the bottom drawer, and the front door (just lift it off the hinges). This allowed me to access the burner, and I removed it by unscrewing the three screws, unhitching the igniter connector, and lifting the burner and igniter up and out. I connected the new igniter on the new burner before installing it in the oven, and found that the connector did not match (I was warned about this possibility on the PartSelect site), but instead of splicing the wires together, I cut off the connector on the new igniter and replaced it with the connector of the old igniter. Then I screwed the burner into the oven, recoupled the connector, replaced the floor, drawer, and door, and I was done! It took about 45 minutes.
Other Parts Used:
Matthew from Goshen, IN
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Wrench set
14 of 15 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
oven would glow but the burner would not come on
My son took out the old burner bar and there was a hole burnt right through it. I ordered the part on Weds night and was surprised when we received it so quickly on Fri morning. He had no trouble at all - just removed the old igniter and bar and replaced it with the new one. Nothing needed cut or spliced - perfect match. Now I can bake again!!!
Other Parts Used:
Charlotte from Rochester, PA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
7 of 15 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
igniter was bad and tube wasblown
repair was easy enough, but the kit came with female ends and needed mail ends. I had to splice old connecters to new igniter
Other Parts Used:
James from Hayden, ID
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Socket set
5 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Symtoms: a fluttering noise was heard for a few weeks in the oven prior to it not working at all.
When turning on the oven, I could see the ignitor red hot but it would not ignite the burner. I ordered the pair of new ignitor and burner tube. Upon removal of the burner tube, I saw a large hole in the tube where the center of the ignitor is located, clearly in need of replacement. Unlike some other ovens, the connector on the new ignitor was the exact fit for my oven (Hotpoint RGB745BEA7WH). After access to the tube, the replacement took less than 10 minutes not including watching about 3 youtube videos on how to actually do the replacement prior. You should turn the gas and electric off but ooops, I forgot. I was shocked at how easy this was!
Other Parts Used:
James from WEBSTER, NY
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burner had a hole burnt in it, glow plug broken
Removed burner and replaced
Other Parts Used:
Thomas from Columbia, TN
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers, Wrench (Adjustable)
1 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
6 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mark
October 3, 2017
Is this part the igniter and burner combination, the correct part for my GE xl44 gas oven?
For model number JGBP86CEB5CC
Hi Mark,
Thank you for your question. Yes, this is the correct part for your model. Good luck with your repair.
3 people found this helpful.
Was this helpful?
Thank you for voting!
STEVE
June 25, 2019
While baking we noticed oven was restarting alot. We would hear a big wooooof quite often while cooking now it only heats to 270 f.Would a ignitor and gas burner tube assy resolve this? thanks
For model number JGBP35WEA8WW
Hello Steve, thank you for your question. It sounds like the issue is either the sensor, or the oven igniter. If the igniter starts to fail, it will take longer to heat, and have to relight quite often. We would recommend testing the sensor and igniter first. I hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Te
January 30, 2020
Each time the oven ignites there is the sound of a small explosion. I think it is louder than it used to be. Does the igniter need to be replaced?
For model number JGB920CEC1CC
Hi Te, thank you for your question. It sounds like you may need to. You can test the part first with a multi meter to be sure. The igniter should be reading between 0 - 1100 ohms to be working correctly. You may also just want to check your regulator and safety valve as well. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Joseph
June 20, 2019
What is the difference between an igniter glow bar and a flat style oven igniter? Is one for the lower oven and the other used to ignite the upper broiler?
For model number JGB605SET1SS
Hi Joseph, thank you for your question. Yes, the igniter glow bar is the one for the top of your oven, the broiler. While the one that I have linked below for you is the bake igniter. I hope that helps. Good luck with your repair.
Is this part ps952996 the correct one for my GE stove model JGB295DER1WW?
For model number JGB295DER1WW
Hello Terry, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number: PS952996. We hope this helps!
Was this helpful?
Thank you for voting!
Will
January 10, 2024
When oven is turned on, and while it's preheating, now and then after a few minutes, it will go "boom". Doesn't happen all the time. So I'm thinking that I may need to remove the bottom oven panel and clean/vacuum the bottom/gas tube and ignitor. Could there be something else causing the problem?
For model number JGBP86SEM1SS
Hi Will, thank you for getting in touch. Based on our research, if the oven makes a boom sound, it means that there is a delay in ignition. We would recommend checking the oven ignitor part number PS231280. You may need to replace it to fix the issue. We hope this sorts out your problem!
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Having a problem with a funky-smelling washing machine, or one that just doesn't seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This powerful washing help...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
