Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Steve M - September 20, 2018
Verified Purchase
Exact OEM parts
Exact replacement parts. Install videos are a nice bonus if needed.
★★★★★
★★★★★
Dan M - September 4, 2021
Verified Purchase
Perfect Fit. Easy o install
The ends of the tubing are pref-itted to the correct size.
★★★★★
★★★★★
Pierre L - January 25, 2020
Verified Purchase
Easy repair and great “upgrade” to the water inlet.
Original tube leaked at the Parker fitting. Followed the YouTube video on how to repair and it was very easy. What I like about it thought is the new tube is approx. 3 feet longer then the original install. I was able to connect to the main water line, brace it to the wall and plenty of length to move the fridge in and out without it obstructing.
★★★★★
★★★★★
Teena G - January 30, 2019
Verified Purchase
Easy repair
The part was easy to install along with the very helpful video. Thank you.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.4 / 5.0, 16 reviews.
What's this?
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Pur Water filter ruptured could not remove from housing
Removed two screws holding the filter housing. Pulled filter and housing out far enough to remove inlet and outlet lines.Replaced inlet and outlet lines( precautionary) in filter housing, installed new filter.
It was pretty easy to install. The most difficult part was trying to get my hands into the small area to work. I had to use both hands, one to push the release in and the other to pull the tube out. Once I did that, inserting the tube was easy and everything worked perfectly.
Other Parts Used:
Julia from Seguin, TX
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
25 of 34 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
water leak
It was easy, I followed the instructions on the paper and it went well.
Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
5 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
old inlet tube was leaking and direct replacement was out of stock
I replaced the filter inlet tube with this filter inlet tube because the refrigerator looked the same and I thought it would therefore be approximately correct. It was except for the connection to the copper tube feeding into the plastic tube. The fitting was not compatible and needed to be cut off and replaced with a new ferule and fitting purchased from a local hardware store for about two or three dollars.
Other Parts Used:
Anthony from WELLESLEY, MA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Wrench set
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Leaking from the supply line to the water filter
Purchased a new line, watched the video. The video was a bit misleading the filter housing does not slide out the front to access the removal of the line. I doing so I broke the clip holding the smaller line had to order the complete housing. 90 dollars it's repaired now so all is well .
Other Parts Used:
John from BUFFALO, MN
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Screw drivers, Socket set
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Refrigerator Water Line Leak
My water line to refrigerator sprung very small leak due to years of rubbing on its own bracket holding it to back of refrigerator. The removal and installation are exactly like shown in the video on PartSelect website. A possible problem can arise when removing and re-inserting the water line into "colletts" on the refrigerator filter housing. The grey circular colletts push in and out, not far, but after years of use can be brittle. If you move the colletts too much, a small part of plastic can snap, and you will then need an entire new filter housing. Be gentle when depressing the collett to pull out and push in the water line.
Other Parts Used:
Steven from RNCHO CORDOVA, CA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Socket set, Wrench (Adjustable)
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Inlet tube cracked and started leaking
Woke up to a wet wood floor and rug due to inlet tube spinging a leak/cracked. Watched repair video on utube. Ordered the part. And did the repair. But the other parts that the tube connects to started leaking due to age I assume and moving things to reach the part that tube went to. Old parts started leaking when I turn water back on. So now I have to replace the inlet valve and filter sleeve next. Hoping that will solve the issue and have ice again with out a wet floor and rug.
Other Parts Used:
Judith A from Pahrump, NV
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Wrench (Adjustable)
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Two problems: The door made a loud snapping noise when opening and closing, and the water supply line was leaking at the wall valve.
In all honesty, watch the videos. They walk you through step by step and provide excellent instructions. The only comment I will make is that in my case, the snapping sound when opening the door was caused not so much by wear, but by the bolt holding the cam being loose. I decided to order the lower door closing cam because I figured there had to be some wear after all these years, and as long as the door is off I may as well replace it. The part is reasonably priced and well worth it. My only deviation from the video is that I used removable LocTite on the bolt when reassembling. Everything is smooth and quiet.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
11 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dennis
August 28, 2017
Filtered water dispenser won't stop leaking. Where do i find the seal or valve that controls it ?
For model number ET1FHTXM004
Hi Dennis,
Thank you for your inquiry. There is a video listed with the part that be of assistance to you regarding this situation. You may find the video on website just below the information on the part. I hope this helps. Thank you and have a great day!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Daryoush
September 29, 2017
The filter inlet tubing popped out of the connector that connects the main water line and the filter. The compression nut could have failed. I tried to put the tubing through the compression nut and back on the connector, but as soon as the water turned back on the pressure pushed the tubing out. I'm not sure if the compression nut failed, the tubing, or there is too much pressure in the filter. Will this part be able to connect to the connector with a possibly failed, old compression nut? Thank you
For model number Kenmore 52693100
Hi Daryoush,
Thank you for your inquiry. There is a video on our website that you may reference that may help you with this. I hope this helps. Thank you and have a great day!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Alexis
March 13, 2019
Will this part work with my model #?
For model number ED5FHEXVS00
Hello Alexis, thank you for your question. For model ED5FHEXVS00 the Filter Inlet Water Tube is part PS11740254.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Vernon
July 12, 2021
How to remove and replace leaking supply line
For model number ED5SHAXMT10
Hello Vernon, Thank you for the question. We suggest watching the How to Video on replacing the Line. We hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Tom
November 3, 2017
Does the new water inlet kit come with a new plastic fitting, as i have broken mine. Should have watched the video first.
For model number ED5FHEXMB00
Hi Tom,
Thank you for your question. Yes, the quick fittings would be part of your water inlet valve. I hope that helps. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Eddie
January 16, 2018
My refrigerator makes a hammering sound when dispensing water thru the door or when the ice maker fills. What could be the problem? Thank you.
For model number ED5LVAXVQ00
Hi Eddie,
Thank you for your question. If you are hearing a sound like a jackhammer when you are getting water from the dispenser, the issue is with the water inlet valve. The noise is caused by a mechanical failure inside the water inlet valve and it will need to be replaced. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Jaime
November 30, 2018
Where can i purchase just the hose retainer (5/16" not the 1/4") for the water filter? It is the part that must be depressed to remove the hose from the filter assy.
For model number 106.51574200
Hello Jaime, Thank you for your inquiry. The hose retainers that the lines go into are part of the water filter housing assembly, part# WP2186443, and are not sold separately. Good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
James
December 12, 2018
Do you have the video and the parts to fix a water leaking from the tube to go inside the freezer door
For model number ksrg25fkbt04
Hello James, thank you for your question. The tube that runs up the inside of the door to the dispenser is PartSelect Number PS886371. We do have an installation video on installing that part on our site. It is found below the picture of the part when you search the part number. Good luck with your repair!
Filter is missing. Filter housing is gushing water. Do i have to have filter inserted to stop leak and to get ice and water?
For model number TS22AFXKQ00
Hi Marie,
Thank you for your question. There should be a water filter in place in the water filter housing. A water filter may stop the leak, but you should also check the water filter housing to make sure it is not the cause and check the tubing and the water inlet valve as well to see if they are working correctly. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
William
February 7, 2018
How do you access the water dispenser tube in the door, it started leaking at the hinge and there is not enough to couple to and if there was i would not be able to get the grill back on
For model number KSRG22FTSS01
Hello Williams, thank you for your question. This video on replacing the tube that runs up through the door and to the dispenser should help with removing and replacing the dispenser tube. I hope this helps!
https://www.partselect.com/PS886371-Whirlpool-8201537-Water-Dispenser-Fitting-and-Tube-Assembly.htm?SourceCode=1&SearchTerm=KSRG22FTSS01&ModelNum=KSRG22FTSS01&ModelID=698161
The filter is NOT included with this part. This part has a 1/4" and a 5/16" push on fittings - that way, you can push in the water lines for easy installation.
The Water Tube is an OEM component specifically designed for Whirlpool refrigerators. This 1/4" outer diameter water tube provides a pathway for water to flow through the refrigerator's internal components during operati...
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Affresh® Dishwasher Cleaner is the #1 recommended cleaner by Whirlpool, KitchenAid, and Maytag brands, designed to remove limescale and mineral build-up that can affect your dishwasher’s performance. These powerful table...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS886401
Manufacturer Part Number: 8201597
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Refrigerator","title":"Refrigerator","url":"/Refrigerator-Parts.htm"},{"position":2,"name":"Hose or Tube","title":"Hose or Tube","url":"/Refrigerator-Hoses-and-Tubes.htm"},{"position":3,"name":"8201597","title":"8201597","url":""}]
