Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Chris
February 13, 2019
So the oven control will not operate but when you touch the front panel it beeps but no clock or lights ..no lower oven. believe its the control
For model number cgs990set7ss
Hello Chris, Thank you for your question. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, we have videos available to assist you.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Kelly
July 2, 2019
The clock isn’t keeping proper time - running fast (1 minute is now 50 seconds). Is part 105 the fix for this issue?
For model number CGS990SET3SS
Hi Kelly, thank you for your question. If your oven control board is not working then you may have to replace it there. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
Derek
December 11, 2019
I have no power to the bottom oven igniter. What part do I need?
For model number CGS990SET8SS
Hello Derek, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS4704151. Hope this helps!
Lower oven heats up then turns the whole oven off.
Part # WB29K 10423 replaced; worked for awhile but now does the same turn-off routine.
For model number CG990SET7SS
Hi Robert,
Thank you for your question. If the oven is not heating correctly and you have already replaced the electronic control board, the issue may be with the oven sensor. The oven temperature sensor is the part that monitors the oven temperature and signals the electronic control board to adjust the temperature inside the oven. Before removing this part from the oven and testing it with a multimeter for continuity, unplug the oven from the electrical outlet. A normal reading should be 1100 ohms, but as readings vary from model to model, you will need to reference your owner’s manual to determine what the correct reading should be. To test it for continuity, use a multimeter on the Rx1 setting and touch the terminals with the probes. This test needs to be done with the sensor at room temperature to produce accurate results. If your test results do not meet the manufacturer’s guidelines, you need a replacement temperature sensor. If the sensor is fine, you will need to check the igniter and the wiring between these parts to see which one is causing the issue. If you have any questions, please let us know. We are open 7 days a week. We look forward to hearing from you!
Hi Brandon, thank you for writing in. Yes you are correct you need to replace the oven control and you have chosen the correct part for your model. Hope this answered your question.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Our scratch-free, streak-free formula removes fingerprints, smudges, grease, dirt and oil, while protecting and polishing to repel dust and dirt. Use on all stainless steel appliance brands and surfaces. Stainless Steel ...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS8754525
Manufacturer Part Number: WB27K10423