CGS990SET1SS General Electric Range - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Meat Probe Thermistor – Part Number: WB20T10024
$77.91
Special Order
Meat Probe Thermistor
★★★★★
★★★★★
(8)
Part #WB20T10024
This probe is used to check the internal temperature of the meat to ensure proper temperature is reached. Also known as a Meat Probe.
Range Surface Burner Head – Part Number: WB16K10079
$242.69
Special Order
Range Surface Burner Head
★★★★★
★★★★★
(29)
Part #WB16K10079
This surface burner head is for ranges. Surface burner head distributes the gas through holes or slots to create an even flame across the cooking area. Shut off the gas supply and unplug the range before installing this part. Wear work gloves to protect your hands.
Burner Cap - 15K – Part Number: WB28K10222
$43.95
Special Order
Burner Cap - 15K
★★★★★
★★★★★
(6)
Part #WB28K10222
This is a replacement burner cap for your gas range or cooktop. The burner cap is found on the burner head, and prevents debris from getting into the head when it is not in use. The cap is black in color and is sold individually. It is a little more than 4 inches in diameter. To replace the burner cap, simply remove the damaged cap, and replace it with the new one. No tools are required for this repair. This is an OEM part from the manufacturer.
Top Burner Spark Electrode – Part Number: WB13K10014
No Longer Available
Top Burner Spark Electrode
★★★★★
★★★★★
(1)
Part #WB13K10014
This part helps your burner ignite and produce flame.
Oven Burner Igniter – Part Number: WB13K10043
$155.08
Special Order
Oven Burner Igniter
★★★★★
★★★★★
(10)
Part #WB13K10043
This part is the replacement oven burner igniter, broil igniter, or glow bar igniter for your cooktop or range. It is designed to ignite the fuel from the fuel lines and light the broil burner. If your broil burner will not ignite, it is a good indication that the burner igniter is burned out or damaged. Be sure to shut off the power and gas to the range before you begin to repair this part. This part is sold individually and is an OEM part from the manufacturer.
Burner Cap - Black - Medium - 9500 BTU – Part Number: WB29K10023
$44.34
Special Order
Burner Cap - Black - Medium - 9500 BTU
★★★★★
★★★★★
(4)
Part #WB29K10023
This burner cap is for your gas range, and acts as a cover for the burner head. It is black in color and just over 3 inches in diameter. If your old burner cap is damaged or missing, this is the part that will replace it. This is an OEM part sourced directly from the manufacturer and is sold individually.
Burner Knob – Part Number: WB03K10265
$145.32
Special Order
Burner Knob
★★★★★
★★★★★
(2)
Part #WB03K10265
This knob accepts a D-shaped shaft. Sold individually. NOTE: The manufacturer has updated this knob. It may be smaller than the original but will function the same.
Vision Burner - Extra Large – Part Number: WB16K10062
$145.32
Special Order
Vision Burner - Extra Large
★★★★★
★★★★★
(4)
Part #WB16K10062
This is a replacement vision burner or surface burner head for your gas range. It is silver in color and approximately 4.5 inches in diameter. This burner is sold individually. The burner head distributes gas to create an even flame across the cooking area. If you notice that your food is not cooking evenly, or you are not getting an evenly distributed flame, you may need to replace the burner. The burner is located beneath the burner cap, below the grate. To remove the burner, simply remove the grate and the burner cap, then lift the burner head out. Replace it with the new burner, and reinstall the cap and grate. This is an OEM part sourced directly from the manufacturer.
Burner Cap - 5000 BTU - Black – Part Number: WB29K10022
$30.35
Special Order
Burner Cap - 5000 BTU - Black
Part #WB29K10022
This is a burner cap for your gas range. The cap is black in color and about 3 inches in diameter. The cap acts as a cover for the burner head. If your old burner cap is damaged or missing, this is the part that will replace it. This is a quality OEM part sourced directly from the manufacturer. This cap is sold individually.
Range Leg Leveler – Part Number: WB02K10182
$14.95
Special Order
Range Leg Leveler
Part #WB02K10182
Burner Head - Medium - 9500 – Part Number: WB16K10055
$102.99
Special Order
Small Burner - 5K – Part Number: WB16K10070
$57.02
Special Order
Small Burner - 5K
★★★★★
★★★★★
(1)
Part #WB16K10070
This genuine small burner is an original replacement part from GE, designed for use with a wide range of gas ranges. Positioned between the rangetop and bracket assembly and the burner cap, it plays a key role in generating the flame needed for cooking. No tools are required for installation, making it a quick and convenient replacement. The burner is sold individually, and users should consult their appliance manual for proper installation and safety guidelines.

Manuals & Care Guides for CGS990SET1SS

Click to download

Common Symptoms of the CGS990SET1SS

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Oven Lamp Holder Burned
25 of 33 people found this instruction helpful.
  • Jack from Okmulgee, OK
  • Really Easy
  • Less than 15 mins
  • Screw drivers
removed two phillips screws. Unplugged electrical connections replaced unit from PartSelect. They sent holder cover and new bulb (surprise). Great store with great directions.
Was this helpful?
Thank you for voting!
burner would not lite
23 of 34 people found this instruction helpful.
  • Glen from Kenner, LA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
openend stove top disconnected wire pushed out old sparker inserted new one closed lid game over
Was this helpful?
Thank you for voting!
Bottom oven wouldn't warm up
17 of 22 people found this instruction helpful.
  • Mike from SAYREVILLE, NJ
  • Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers
Remove the door for easier access. Remove the fan cover from the back of the oven (about 6 Phillips head screws). Remove the bottom cover (2 5/16" screws). Lift the cover from the back and slide out. Remove the old igniter (2 5/16" screws). Pull the oven away from the wall. Remove back cover (3 5/16" screws). Unplug igniter, feed wiring t hrough the oven. Install new igniter.
Was this helpful?
Thank you for voting!