This is a replacement burner cap for your gas range or cooktop. The burner cap is found on the burner head, and prevents debris from getting into the head when it is not in use. The cap is black in co...
This knob accepts a D-shaped shaft. Sold individually.
NOTE: The manufacturer has updated this knob. It may be smaller than the original but will function the same.
This surface burner head is for ranges.
Surface burner head distributes the gas through holes or slots to create an even flame across the cooking area.
Shut off the gas supply and unplug the ra...
This burner cap is for your gas range, and acts as a cover for the burner head. It is black in color and just over 3 inches in diameter. If your old burner cap is damaged or missing, this is the part ...
This part is the replacement oven burner igniter, broil igniter, or glow bar igniter for your cooktop or range. It is designed to ignite the fuel from the fuel lines and light the broil burner. If you...
This is a replacement vision burner or surface burner head for your gas range. It is silver in color and approximately 4.5 inches in diameter. This burner is sold individually. The burner head distrib...
This is a burner cap for your gas range. The cap is black in color and about 3 inches in diameter. The cap acts as a cover for the burner head. If your old burner cap is damaged or missing, this is th...
This part sits on top of the elements or cooktop that you already have and warms or cooks your food.
$279.51
Special Order
Questions And Answers for CGS990SET3SS
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Francis
December 1, 2022
I set the temp for the lower oven to bake and when I opened the door I heard a loud "pop" sound and the oven and control panel went black. The "fan" is still running. The upper oven and cooktop work. Is it the panel? Or is it the fan? Any ideas and part #'s would be appreciated.
For model number CGS990SET3SS
Hello Francis, thank you for asking. According to our research, the issue is likely caused by a faulty plunger switch, part number PS2370050. If that does not help, you may need to replace the control board, part number PS8754525. If you need help placing an order for it, please feel free to give us a call. We look forward to hearing from you!
Look for the part number for the upper over controller that the knob attaches to.
For model number CGS990SET3SS
Hello Bruce, thank you for reaching out. According to our research, the knobs are attached to the front panel, part number PS6011620, and the control board for your model is part number PS6883565. If you need help placing an order, customer service is open 7 days a week!
removed two phillips screws. Unplugged electrical connections replaced unit from PartSelect. They sent holder cover and new bulb (surprise). Great store with great directions.
Remove the door for easier access. Remove the fan cover from the back of the oven (about 6 Phillips head screws). Remove the bottom cover (2 5/16" screws). Lift the cover from the back and slide out. Remove the old igniter (2 5/16" screws). Pull the oven away from the wall. Remove back cover (3 5/16" screws). Unplug igniter, feed wiring through the oven. Install new igniter.