CONTROL OVN (ERC3HP)

Hello Chris, Thank you for your question. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, we have videos available to assist you.

Hi Kelly, thank you for your question. If your oven control board is not working then you may have to replace it there. I hope that helps. Good luck with your repair.

Hello Derek, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS4704151. Hope this helps!

Hi Robert, Thank you for your question. If the oven is not heating correctly and you have already replaced the electronic control board, the issue may be with the oven sensor. The oven temperature sensor is the part that monitors the oven temperature and signals the electronic control board to adjust the temperature inside the oven. Before removing this part from the oven and testing it with a multimeter for continuity, unplug the oven from the electrical outlet. A normal reading should be 1100 ohms, but as readings vary from model to model, you will need to reference your owner’s manual to determine what the correct reading should be. To test it for continuity, use a multimeter on the Rx1 setting and touch the terminals with the probes. This test needs to be done with the sensor at room temperature to produce accurate results. If your test results do not meet the manufacturer’s guidelines, you need a replacement temperature sensor. If the sensor is fine, you will need to check the igniter and the wiring between these parts to see which one is causing the issue. If you have any questions, please let us know. We are open 7 days a week. We look forward to hearing from you!

Hi Brandon, thank you for writing in. Yes you are correct you need to replace the oven control and you have chosen the correct part for your model. Hope this answered your question.