Average Repair Rating: 4.5 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Not getting power. Problem not the control unit.
When I installed the control unit that you diagnosed, it didnt fix the problem. So i returned it to you and hauled the dish washer to the dump and bought a new one.
Other Parts Used:
Michael from ARP, TX
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
8 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Patrick
January 11, 2018
We had a lighting storm a few months ago knocked out my wifi and dishwasher quit working . 3 lights light but won't start should i change the contro panel
For model number SHE3AR56UC/07
Hi Patrick, thank you for the question. With the lighting strikes it most likley caused the control unit,Part Number: PS8736204 to burn out, it will need to be replaced. Hope this helps!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Bob
February 13, 2020
Not draining. Resetting and restarting, any setting, almost immediately jumps to "clean." repair guy checked, said pump looked good, drain was clear, but unit not cycling because control board needs to be replaced. Does this sound right? He quoted over $350. Is this a fairly easy replacement?
For model number SHE3AR56UC/16
Hi Bob. This sounds like a control board issue. The tech sounds like they are overcharging for install. Please watch our installation video here: https://www.youtube.com/watch?v=CLR4ZrKB4ow. Thank you for your question and good luck with your repair.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Crag
August 27, 2019
All lights work on/off works changes cycle lights but wont start when start button pushed
For model number she3ar52uc/07
Hello Crag, thank you for writing. This could be due to a faulty push button Switch, part number PS8727333 for your model. You may also want to consider the Door Latch, part number PS8728401 as the cause. Good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Wayne
October 28, 2021
DW not drying. Repair guy said he thought it needed a control board. He ran it thru the diagnostic test and the DW did dry for two cycles and then no more. They wanted almost $700 and would not guarantee it would fix the problem. How to determine which control board (two listed on your website) is needed?
For model number SHE3AR52UC/07
Hello Wayne, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS8736204. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Connie
March 8, 2019
What are the dimesions unit?
For model number she3ar52uc/07
Hello Connie, thank you for your question. This part is approximately 12 x 3 inches. I hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Stephen
April 22, 2019
I've closed the door, pushed the power on/off, the lights "normal wash" rinse aid" and "3 hr" delay start lights all light up. I try to cycle thru select a setting, all that will happen is the "child lock" light also lights up with any button pushed. The lights never cycle thru the other options, and pushing the start button only lights the "child lock" lamp. The machine never starts. I'm thinking i'm needing a new control unit , just not 100% sure. Stephen
For model number SHE3AR56UC/07
Hello Stephen, thank you for inquiring. For this symptom you will want to replace either the Switch part PS8727333, the Drain Pump part PS8727352, or the Control Unit part PS8736195. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Steve
August 22, 2019
I tested the control board a got a few ohm readings....anything that would really tell me if there was a problem with the board?
For model number SHE3AR56UC/18
Hi Steve,
Thank you for your question. If your multimeter is only reading a few ohms then there is likely an issue with the board and it will need to be replaced. Here is a link to one of our videos on YouTube that you may reference on how to use a multimeter, https://www.youtube.com/watch?v=bWC44fHn0As. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Guy
March 15, 2022
For some reason fill valve doesn't always open when starting the dishwasher. Dishwasher starts, both pumps work and then when supposed to fill, valve doesn't open and dishwasher gets to cancel mode and after a minute shows clean.
Sometimes it works fine on the first attempt, but most of the time you need to keep restarting it until it works.
I thought of a faulty valve so replaced it with a new one. Didn't fix it. I taught it wasn't recognizing the door was fully closed so I replaced the latch and lock, no change. Could it be the control unit?
For model number SHE3AR52UC/07
Hi Guy,
Thank you for your question. If you have replaced the water inlet valve and the door switch and the dishwasher will still not fill with water, the issue may be with the control unit. Check the connections to it and make sure they are secure. Also, check the control unit for signs of damage, wear, scorching or burn marks. If it shows any of these signs, it will need to be replaced. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
