Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Guillaume
December 11, 2021
Hi, my Bosch dishwasher is going straight to clean without going trough the cleaning cycle. The sump pump start’s 3 times even though there is no water to pump and then it displays clean directly. At first the problem was intermittent but now it won’t run at all. If i put water in the dishwasher the sump pump does get it out but it seems to just keep pumping even when the dishwasher is empty. Any cues to what could be the problem would be greatly appreciated.
For model number SHE3AR55UC/07
Hello Guillaume, Thank you for your inquiry. We have researched the model you have provided and we would recommend checking the following parts to fix your issue: the water inlet valve, the float switch, the door lock, the circulation pump, the sensor, and the control boards. Also check the wiring for any visible damage. Good Luck with your repair.
Hello Johanne, thank you for writing. The whistling noise may be a problem caused by a faulty inlet water valve. The valve is located at the bottom of the dishwasher, just to the left of the pump. A screen inside the valve may be clogged by debris or food. Clean the filters with soapy water and an old soft toothbrush. The Inlet Valve is part PartSelect Number PS8728724. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Tina
July 27, 2021
If i need a power module do you sell one?
For model number SHE3AR55UC/07
Hello Tina, Thank you for contacting us. We do sell the control module for this unit, part number PS8736195. Hope this helps.
After putting my dishwasher on the auto wash flash and when i push the start button there is a small noise and nothing start
For model number SHE3AR55UC/07
Hello Charles, thank you for writing. The Switch that controls the start and stop function may be the issue. The Part PartSelect Number PS8727333. Good luck with your repair.
Im looking for a replacement control panel for my BOSCH dishwasher (black)
For model number SHE3AR55UC/07
Hello Geoff, thank you for reaching out. The part number for the black control panel is PS8735104. Please reach out to customer service if you need help placing an order, anyone will be happy to assist you. We hope that helps.
We let this go for a shameful amount of time before I decided I could probably fix it. The roller broke so you could only pull it out about halfway or it would come off the track. I looked up the part, and bought it. Actually bought two in case it happened again. When I arrived I looked at how it was put together on the other side and then just basically pushed it onto the rod and it was fixed. I am ashamed it took so long to do it. Never be afraid to try it yourself. It was a total of $10 shipped to fix it.
disconnected inlet hose and water line from sink, removed old inlet valve and installed new valve and reconnected inlet hose and water line from sink - checked for leaks.
This was the third time I replaced a fill valve in a Bosch diswasher, twice in this unit and once in a previous unit. I read the installation hints on your web site and want to add the following suggestion.
The notes on your web site say you can remove the valve from behind the toe face and pull it out to reach the hose and plug. I found that the Bosch designers called for both the hose and wire to on the short side. I found that pulling the dishwasher forward 6" to 9" allows you to access these connections from the side at least to hold them while making the connection. I hope this helps. Thank you, Bill
