Average Repair Rating: 3.8 / 5.0, 2 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
NO SPIN WATER REMAINING IN THE TUB
Remove the bad motor assembly ac pump with the new one.
Other Parts Used:
JAKE from MERRITT IS, FL
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Linking drain pump
Unplug washer. All work can be from back of washer. Remove 2 wires, 2 hose clamps and hoses, 3 mounting bolts. Reuse mounting bracket and replace pump in reverse. Run wash to check for leaks, repair if any. Return washer to original location.
Other Parts Used:
John from SULPHUR, LA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Socket set
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Daniel
September 16, 2019
LG washer pump. How do i test to see if the motor on the pump is ok. Getting a oe error on the washer message and the machine will not drain. Took the pump out and drained the tub manually and found no blockage so suspected pump. Ohm reading 12
For model number WT5270CW
Hello Daniel, thank you for inquiring. The OE error indicates that the machine is unable to drain, either from a kinked Drain Hose (part number PS8749199), or a clogged Drain Pump Filter. It could also be due to a faulty Drain Pump (part number PS3636111). You can test the voltage of the Drain Pump with a multi-meter. It needs 120 volts to run correctly. You will need to test the voltage with the machine set to the drain/spin cycle. A reading of 16 ohms when testing the resistance is a good reading. Good luck with your repair!
8 people found this helpful.
Was this helpful?
Thank you for voting!
Paul
September 23, 2021
I have replaced drain pump, made sure all drain hoses were not clogged and it still will not pump water from the tub. Washer goes into a spin cycle for a brief time but will not pump the water out of the tub, then it goes back to a very slow spin. What else can I check?
Hi Paul,
Thank you for your question. If your washer will not drain, the water level pressure switch may be malfunctioning. Before inspecting and testing the switch, please unplug the washer from the electrical outlet. Begin by opening the washer’s cabinet and remove the hose attached to the switch. Place the hose in water, seal one end, and blow into the other. If any bubbles rise to the surface, you will need a new hose. Then inspect the switch and the hose for any signs of cracking, fraying, wear, or damage. If you find your switch is damaged, you will need to replace it. We hope this helps! If you have any questions, please let us know.
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
