Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tim
April 13, 2018
How do i install a hose and water inlet that now leaks. Part # ps756807. Looks like i have to remove the top of the washing machine.
For model number WWSE5200B2WW
Hello Tim, Thank you for your inquiry. You would have to open up the console first, usually there will be screws at the back you can undo and you may need a putty knife to release any tabs. Lay the front of the control console down and you should now be able to access the valve and inlet hose. Use a pair of pliers to compress the clamp so you can move it down the hose and take the hose off the valve. You may need a flat head screw driver to break it free. Then lift the console back into place, not attaching the screws for the moment. Then lif the lid and reach underneath with a quarter inch nut driver to take out the screws that hold the water inlet assembly in place, then pull out the hose and water inlet assembly. Use pliers to transfer the clamp from the old assembly to the new assembly and put the new assembly in place. It can be a good idea to attach the two screws that hold the assembly first so once you get it in place you can get it started with your fingers then tighten them with a nut driver. Tilt the console forward slightly while you putting the hose and water assembly in place to get the screws lined up properly and attach them. Close the like and lift up the console again to put the hose back onto the water inlet valve and use pliers to push the clamp into place, then replace the console and re-attach the screws. Hope this helps!
Was this helpful?
Thank you for voting!
Gerald
December 26, 2019
Do you have video on replacing part# ps756807?
For model number WHRE5260E1WW
Hi Gerald, Thank you for your inquiry. We do not have a video. You would have to open up the console first, usually there will be screws at the back you can undo and you may need a putty knife to release any tabs. Lay the front of the control console down and you should now be able to access the valve and inlet hose. Use a pair of pliers to compress the clamp so you can move it down the hose and take the hose off the valve. You may need a flat head screw driver to break it free. Then lift the console back into place, not attaching the screws for the moment. Then lif the lid and reach underneath with a quarter inch nut driver to take out the screws that hold the water inlet assembly in place, then pull out the hose and water inlet assembly. Use pliers to transfer the clamp from the old assembly to the new assembly and put the new assembly in place. It can be a good idea to attach the two screws that hold the assembly first so once you get it in place you can get it started with your fingers then tighten them with a nut driver. Tilt the console forward slightly while you putting the hose and water assembly in place to get the screws lined up properly and attach them. Close the like and lift up the console again to put the hose back onto the water inlet valve and use pliers to push the clamp into place, then replace the console and re-attach the screws. Hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS756807
Manufacturer Part Number: WH41X10078