Frigidaire 5303935058 - Terminal Block Kit | PartSelect.ca
Terminal Block Kit – Part Number: 5303935058
Terminal Block Kit – Part Number: 5303935058 https://partselectca.azureedge.net/Schematics/Frigidaire/QKYR9TUK.gif

Terminal Block Kit

8 Reviews

Your Price

CAD$9.59

PartSelect Number PS470125
Manufacturer Part Number 5303935058
Manufactured by Frigidaire

This surface burner terminal block kit comes with interchangeable mounting brackets, ceramic wire nuts, heat shrink protective tubing and wires.

This part works with the following brands: Frigidaire, Tappan, Kenmore, Kelvinator, Gibson, Westinghouse, Crosley, Uni, General Electric, Electrolux.

This part works with the following products: Range, Cooktop, Wall Oven.

This part fixes the following symptoms: Element will not heat | Will Not Start

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.8 / 5.0, 26 reviews What's this?
1-5 of 26
361 of 367 people found these instructions helpful
Parts Used:
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers
Customer:
Steven from Taylors, SC
Rental property stove only had 2 working burners and bottom drawer off track
first i took out burners then i took out the screws of the termnal block bracket. i then raised the lid on the stoveand clipped the wires on all 4 of the terminal block kits.i then slipped the shrink wrap on wires and used the wire nuts to connect wires together then heated the shrink wrap. I then put screws back in terminal block brackets. I then put the burners on while looking under lid so i would know they were making good connections as this is a bad design from factory. if you pull out burners to clean them and they are not put back in right you dont have a good connection and that causes the terminal blocks to get hot and melt. thats what happened in my case.
As far as the drawer glides they just snap into place

Help other customers find the most helpful instructions.

Were these instructions helpful?   

50 of 58 people found these instructions helpful
Parts Used:
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Customer:
David from Encinitas, CA
Burner shorted out
I followed the directions by clipping wires to old burner socket, splicing the wires to new terminal block, screwing down new "block bracket," and plugging in new burner.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

22 of 30 people found these instructions helpful
Parts Used:
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Screw drivers
Customer:
Matthew from Columbus, IN
Burners on 53 year old range kept going out
When we bought our home less than a year ago, we had three functional burners on our 40" wide 50's classic Kelvinator (not close to standard size these-a-days). After a few months of use, two more burners went out for good and we were stuck using the back left burner for all of our cooking. I opted for the premium burners and made sure to compare my terminals with the ones online to be sure they mounted the same. I removed the burners and terminals, clipped the wires going into the terminals, and removed the top of the stove. I followed the directions that came with the new terminals, pushed in the new burners and viola! All four burners now work. I gave the stove a general cleaning and now my 1954 Kelvinator looks and cooks like it is brand new. It was easily the best $109 I've spent on my home.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

17 of 18 people found these instructions helpful
Parts Used:
  • Terminal Block Kit
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Customer:
Gary from hollywood, FL
Corroded terminals
was more of a job of splicing wires together than anything else. Loved the heat shrink electrical tubing
to put over the wires for insulation. used a hair
dryer. must buy more of that amazing stuff

Help other customers find the most helpful instructions.

Were these instructions helpful?   

20 of 32 people found these instructions helpful
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Customer:
Kathy from Lebanon, IN
Burner quit working
pull out old burner, lifted range top change the terminal which took about 5 min. close top put new burner in and was ready to go. works great.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-5 of 26
Customer Reviews
Average Rating:
8 Reviews
4.6
out of 5
Filter By Rating:
  • 5 Stars
    5
  • 4 Stars
    3
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Stars
    0
Sort by:
Sort by:

Model Cross Reference

Brand
Model Number
Description
Kenmore
1196458010
Wall Oven
Kenmore
1196458011
Wall Oven
Kenmore
1196458110
Wall Oven
Kenmore
1196458111
Wall Oven
Kenmore
1196458112
Wall Oven
Kenmore
1196468010
Wall Oven
Kenmore
1196468011
Wall Oven
Kenmore
1196468110
Wall Oven
Kenmore
1196468111
Wall Oven
Kenmore
1196468112
Wall Oven
Kenmore
1196478010
Wall Oven
Kenmore
1196478011
Wall Oven
Kenmore
1196478110
Wall Oven
Kenmore
1196478111
Range
Kenmore
1196478112
Wall Oven
Kenmore
1196488010
Wall Oven
Kenmore
1196488011
Wall Oven
Kenmore
1196488110
Wall Oven
Kenmore
1196488111
Range
Kenmore
1196488112
Wall Oven
Kenmore
1196498210
Wall Oven
Kenmore
1196508210
Wall Oven
Kenmore
1199008710
Range
Kenmore
1199008810
Range
Kenmore
1199018710
Range
Kenmore
1199018810
Range
Kenmore
1199018811
Range
Kenmore
1199018813
Range
Kenmore
1199018883
Range
Kenmore
1199028410
Range