Whirlpool 4392065 - Maintenance Kit | PartSelect.ca
Maintenance Kit – Part Number: 4392065
Maintenance Kit – Part Number: 4392065 Maintenance Kit – Part Number: 4392065 Maintenance Kit – Part Number: 4392065 https://partselectca.azureedge.net/Schematics/Whirlpool/BJVPXWJX.gif

Maintenance Kit

14 Reviews

Your Price

CAD$34.38

PartSelect Number PS373087
Manufacturer Part Number 4392065
Manufactured by Whirlpool

NOTE: This kit is for 29" wide dryers built in 1965 or later. Please verify model # before ordering as may not work for all models. This kit comes with one multi-rib belt, two drum support rollers, one idler pulley, four tri-rings, and one clip. This part can be used with both gas and electric dryers.

This part works with the following brands: Whirlpool, Kenmore, Roper, Inglis, Estate, KitchenAid, Crosley, Maytag, Amana, Admiral, Magic Chef.

This part works with the following products: Dryer.

This part fixes the following symptoms: Noisy | Will not tumble | Will Not Start | No heat or not enough heat

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part Photo
Description
Price
Availability
(24)
PartSelect: PS346995
This dryer drum belt has four ridges, three grooves and is 1/4" wide.
$19.72
In Stock
(10)
PartSelect: PS347627
This kit includes two rear drum support rollers, four tri-rings, and one palnut. It is recommended that you replace both rollers at once.
$14.36
In Stock
(1)
PartSelect: PS11743765
This part provides the tension for a multi-ribbed belt and helps the belt to rotate the drum. This arm attaches to the idler pulley wheel.
$17.93
In Stock
(1)
PartSelect: PS11755850
Sold individually.
$8.38
In Stock
PartSelect: PS11746832
Sold Individually.
$5.70
In Stock
Questions & Answers
Ask our experts a question on this part and we'll respond as soon as we can.
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.4 / 5.0, 58 reviews What's this?
1-5 of 58
243 of 266 people found these instructions helpful
Parts Used:
  • Maintenance Kit
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers
Customer:
DENNIS from ALTOONA, FL
Broken drive belt
Grow a second set of hands. Always unplug any appliance. Remove lint screen. remove two screws (philips Head). I took a wooden shim lightly tapped w/hammer to pop front of dryer top free. Mine worked on hinges and just flipped back til it rested against the wall. Removed two 5/16 screws inside holding face on carefully raise face section off the support clips at either side on the bottom. Pull drum out (I have the large style drum commercial size [approx.). Clean the inside free of all lint (known to be fire hazard). Sling new belt around drum. Get newly grown set of hands to hold drum in place. Pinch belt to fit between tensioner, lift tensioner and place belt around motor pulley. Spin drum couple times to make certain belt isn't twisted. Reverse dismantle proccess to put back together. Replace all parts that come with kit, you'll feel better knowing you got a new dryer, almost.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

68 of 76 people found these instructions helpful
Parts Used:
  • Maintenance Kit
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers, Wrench (Adjustable)
Customer:
Michael from Haines City, FL
Dryer making extra noise while running
1st Unpluged power.
2nd removed two screws under lint screen cover.
3rd poped up lid with flathead screwdryer, then removed (2) 5/16 screws from door cover and unpluged lid switch, lifted up dryer door pannel
4th removed drum
5th took out plastic triangle wheel rings
6th removed old belt guild (to motor pully)
7th removed old wheels and plastic rings stops
8th cleaned excessive hair dust with shopvac
9th put new replaicment part in dryer. made sure to turn manually to make sure belt was lined up properly, then put all dryer peices back.
10th aditional work, took back cover off and removed the (4) 1/4 screws for lint screen case (left side in dryer) vacumed out any excessive dirt lint ect, also cleaned any excessive dust I found in back of dryer, dryer , exhaust ect, and put all back together.
JUst like a new dryer aain after all PM was complete.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

61 of 83 people found these instructions helpful
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Socket set
Customer:
Herbert from Holley, NY
No heat,thumping when running
Removed front panel, drum,replaced belt,tensioner and worn rollers. Then removed rear panel and replaced heating element and high limit thermostat. While I was there completely cleaned inside of dryer. Repair and replacement of parts was quite easy. Just take your time and don't hurry it.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

53 of 62 people found these instructions helpful
Parts Used:
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
Customer:
Matthew from East Islip, NY
Drum stopped turning on dryer
Great! Spent about $36.00 and I ended up with a overhauled dryer. I ended up cleaning the whole thing out, it's amazing how much stuff accummulates in the frame of a dryer, I also found about $2.00 in change. It's a good idea to clean out a dryer every few years and the broken belt forced me to do it.
But anyway the parts cam very quick and had easy to follow directions.
I would reccomend part select. Matt

Help other customers find the most helpful instructions.

Were these instructions helpful?   

29 of 33 people found these instructions helpful
Parts Used:
  • Maintenance Kit
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers, Wrench set
Customer:
Clifford from Mastic, NY
Dryer stopped tumbling
Pryed the top off the dryer, unplugged the door switch, took the screws out of the front panel, then lifted the drum out. Placed the new belt around the drum and while my wife held it in place and steadied it, I reached underneath and looped the belt through (as per instructions), reassembled and back in business! Reaching under the drum was not that easy....VERY tight space to work in and there was no way I could get both hands through, I almost gave up, but one last try and a couple of good grunts, and it popped into place. Getting the wires back on the door switch was a bit of an ordeal too. Took about 30 mins. but still worth it. I'm sure I saved at least a $100 repair.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-5 of 58
Customer Reviews
Average Rating:
14 Reviews
4.6
out of 5
Filter By Rating:
  • 5 Stars
    12
  • 4 Stars
    0
  • 3 Stars
    1
  • 2 Stars
    0
  • 1 Stars
    1
Sort by:

Model Cross Reference

Brand
Model Number
Description
Kenmore
110.796228
Dryer - Kenmore Dryer Model 110.796228 (110796228, 110 796228) Parts
Kenmore
11060012001
Dryer
Kenmore
11060172001
Dryer
Kenmore
11060232001
Dryer
Kenmore
11060522900
Dryer
Kenmore
1106062110
Dryer
Kenmore
11061202010
Dryer
Kenmore
11061202011
Dryer
Kenmore
11061252010
Dryer
Kenmore
11061252011
Dryer
Kenmore
11062102310
Dryer - 29" ELECTRIC DRYER
Kenmore
11062202101
Dryer
Kenmore
11062212101
Dryer
Kenmore
11062512101
Dryer
Kenmore
11062514101
Dryer
Kenmore
11062602101
Dryer
Kenmore
11062612101
Dryer
Kenmore
11062622101
Dryer
Kenmore
11062702101
Dryer
Kenmore
11062712101
Dryer
Kenmore
11062722101
Dryer
Kenmore
11062724101
Dryer
Kenmore
11062802101
Dryer
Kenmore
11062812101
Dryer
Kenmore
11062822101
Dryer
Kenmore
11062824101
Dryer
Kenmore
11062852101
Dryer
Kenmore
11062872101
Dryer
Kenmore
11063102100
Dryer
Kenmore
11063112100
Dryer