Part Location Diagram of W10337248 Whirlpool Drive Coupling
See part 6 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.ca

Drive Coupling

★★★★★
★★★★★
2 Reviews
$12.63
  In Stock
PartSelect Number PS3654579
Manufacturer Part Number W10337248
Manufactured by Whirlpool
Product Description

Drive Coupling Specifications

This glass tray drive coupling, also known as a tray support, is a genuine OEM replacement part. It can help solve the issue of your microwave tray not turning properly. This motor couple connects the motor to the turntable. To replace this part, make sure the microwave is unplugged first. Remove the glass tray, and the existing coupling. Insert the new coupling into the motor shaft.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Tray won’t turn
This part works with the following products:
Microwave, Microwave Oven Combo.
This part works with the following products:
Whirlpool, Maytag, KitchenAid, Amana.
Part# W10337248 replaces these:
AP5631076
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
2 Reviews
5.0
Filter By Rating:
  • 5 Stars
    2
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 4.9 / 5.0, 6 reviews. What's this?
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Rattling noise when turn table was in motion
Unplug any appliance before any work is done. The microwave is a hanging unit under kitchen cabinets. First I removed the turn table, rollers, and connector by lifting them out. Second I removed all the attaching Phillips head screws that hold the bottom cover on. Once removed the cover will hang and give access to the drive motor gear assembly. It's held in place by 2 torques head screws. Remove these, lower the motor, and disconnect the 2 wires that plug onto it. A small pick or similar tool is needed to release the connectors latches. reassemble in reverse.
Other Parts Used:
RING-TURN Microwave Turntable Motor
  • Michael from YUMA, AZ
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
17 of 21 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Turntable Motor burned out
Unplug microwave
Remove bottom of Microwave with phillips screwdriver.
Remove connecting wires to Motor
Remove Motor (2 Screws) with Torx Wrench.
Transfer seal from old motor to new moter
Re-install motor
Connect wires
Reinstall Bottom of microwave
Plug back into outlet

r
Other Parts Used:
Microwave Turntable Motor
  • Mark from WEST NYACK, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Sparks from drive coupling
remove 6 lower screws, removed lower panel,2 screws holding drive motor,lower motor, remove old coupling from inside microwave and replace with new coupling, re install motor,install lower panel and screws.no more sparks
Other Parts Used:
  • Tanya from LAS VEGAS, NV
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Plastic piece that spins turntable failed because of prolonged heat, I suppose.
Just opened the door and dropped in new part and viola!
Other Parts Used:
  • Bill from CARBON HILL, AL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Brand new (open box) purchase from a local appliance liquidator had missing drive coupling. This part holds the glass plate in place and allows it to turn.
It was a very simple and easy fix, no tools needed. First, open the door to the microwave/oven and remove the glass plate and the plastic plate guide. Next, locate the whole in the center. Using your finger, find the drive coupling pin that sits just below the opening (half circle shape). Align the bottom of the drive coupling with the metal pin and press down. Replace the plate guide and plate. The grooves in the bottom of the glass plate should be aligned with the shape of the drive coupling. Test by setting microwave/oven to 30 seconds and watch for proper turning and alignment.
Other Parts Used:
  • Sabra from PEACHTREE CTY, GA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The support became distorted and needed to be replaced.
I simply lifted out the glass rotating plate and inserted the new support. How complicated can that be?!!!!!!!!!!!!!!!!!!!!!!!!!!!
Other Parts Used:
  • Mary from Wilmington, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

1 question answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Gerry
December 31, 2023
Turntable wobbles - it looks like the piece that holds the turntable is causing it to sit too high and not level. Any help would be greatly appreciated.
For model number KMHS120ESS
PartSelect logo
Hello Gerry, thank you for your inquiry. Based on the description that you have provided, we would recommend checking the glass tray support. If it is not faulty, then replace the drive coupling, part number PS3654579, to fix the issue. We hope this solves your problem!

Was this helpful?
Thank you for voting!
  • 1
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS3654579
Manufacturer Part Number: W10337248
Brand
Model Number
Description
Amana
AMV1150VAB3
Microwave - MICROWAVE OVEN 1.5 CU. FT.
Amana
AMV1150VAB4
Microwave - MICROWAVE OVEN 1.5 CU. FT.
Amana
AMV1150VAB5
Microwave - MICROWAVE
Amana
AMV1150VAB6
Microwave - MICROWAVE/HOOD COMBO
Amana
AMV1150VAD3
Microwave - MICROWAVE OVEN 1.5 CU. FT.
Amana
AMV1150VAD4
Microwave - MICROWAVE OVEN 1.5 CU. FT.
Amana
AMV1150VAQ3
Microwave - MICROWAVE OVEN 1.5 CU. FT.
Amana
AMV1150VAQ4
Microwave - MICROWAVE OVEN 1.5 CU. FT.
Amana
AMV1150VAS3
Microwave - MICROWAVE OVEN 1.5 CU. FT.
Amana
AMV1150VAS4
Microwave - MICROWAVE OVEN 1.5 CU. FT.
Amana
AMV1150VAS5
Microwave - MICROWAVE
Amana
AMV1150VAS6
Microwave - MICROWAVE/HOOD COMBO
Amana
AMV1150VAW3
Microwave - MICROWAVE OVEN 1.5 CU. FT.
Amana
AMV1150VAW4
Microwave - MICROWAVE OVEN 1.5 CU. FT.
Amana
AMV1150VAW5
Microwave - MICROWAVE
Amana
AMV1150VAW6
Microwave - MICROWAVE/HOOD COMBO
Amana
AMV2174VAB6
Microwave - MICROWAVE HOOD COMBO 1.7 CUBIC FEET
Amana
AMV2174VAD6
Microwave - MICROWAVE HOOD COMBO 1.7 CUBIC FEET
Amana
AMV2174VAS6
Microwave - MICROWAVE HOOD COMBO 1.7 CUBIC FEET
Amana
AMV2174VAW6
Microwave - MICROWAVE HOOD COMBO 1.7 CUBIC FEET
Amana
AMV2175CB0
Microwave - MICROWAVE HOOD COMBINATION
Amana
AMV2175CS0
Microwave - MICROWAVE HOOD COMBINATION
Amana
AMV2175CW0
Microwave - MICROWAVE HOOD COMBINATION
Amana
AMV2307PFB0
Microwave - MICROWAVE/HOOD COMBO
Amana
AMV2307PFS0
Microwave - MICROWAVE/HOOD COMBO
Amana
AMV2307PFW0
Microwave - MICROWAVE/HOOD COMBO
Amana
AMV6502REB0
Microwave - MICROWAVE
Amana
AMV6502REB1
Amana
AMV6502REB2
Amana
AMV6502REB3
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service