As per manufacturer this no longer comes with the Spacer.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Tray won’t turn | Noisy
This part works with the following products:
Microwave, Microwave Oven Combo.
This part works with the following products:
Whirlpool, Maytag, Amana, KitchenAid.
Part# WPW10466420 replaces these:
AP6021861, W10210848, W10243962, W10466420
Customer Reviews
Average Rating:
★★★★★
★★★★★
3 Reviews
5.0
Filter By Rating:
5 Stars
3
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Mike S - January 16, 2024
Verified Purchase
Microwave turntable drive motor
Part arrived as directed and with a little research became a very simple installation. Turntable works like new.
★★★★★
★★★★★
Kevin F - April 6, 2023
Verified Purchase
easy repair
Right Part Right on Time
★★★★★
★★★★★
Ariel A - July 10, 2020
Verified Purchase
Worked as expected - quick shippong
The part was in great condition and the shipping was fast. Best price on the internet for the part as well. Easy repair to my microwave and the turntable is back in working order again.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.5 / 5.0, 5 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Rattling noise when turn table was in motion
Unplug any appliance before any work is done. The microwave is a hanging unit under kitchen cabinets. First I removed the turn table, rollers, and connector by lifting them out. Second I removed all the attaching Phillips head screws that hold the bottom cover on. Once removed the cover will hang and give access to the drive motor gear assembly. It's held in place by 2 torques head screws. Remove these, lower the motor, and disconnect the 2 wires that plug onto it. A small pick or similar tool is needed to release the connectors latches. reassemble in reverse.
turntable motor making clicking noise when turning
I unscrewed the bottom plate of microwave oven and took a picture of how the wiring was plugged in and unscrew the motor and put the new one in,it was so easy to do
Other Parts Used:
Rene from BINGHAMTON, NY
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
7 of 8 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
NOISY TURNTABLE DRIVE MECHANISM
RATHER EASY. PHILIPS SCREWDRIVER, TORX DRIVER (FOR THE 2 SCREWS SECURING THE GEARMOTOR ITSELF), VERY SMALL SCREWDRIVER TO ASSIST IN DEPRESSING THE DETENTS ON ELECTRICAL CONNECTORS AT THE MOTOR. IF THE MICROWAVE IS ABOVE A STOVE UNIT, IT'S A GOOD IDEA TO PLACE A TOWEL DOWN ON THE STOVETOP TO CATCH ANY WAYWARD SCREW IF ONE HAPPENS TO GET AWAY. (VOICE OF EXPERIENCE)
Other Parts Used:
Bevan from PACIFICA, CA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
7 of 9 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Turntable would click, pop, and jerk while running.
Unplug the microwave. Removed the glass tray, the roller ring, and plastic piece that sits on the motor shaft from the inside of the microwave. Remove the 12 Phillips head screws from the bottom of microwave, let the bottom hang down on the mounting hooks at the rear of the microwave. Remove the 2 torx screws from the mounting bracket under the microwave lower the turntable motor remove the two leads. Transfer the rubber washer from the old motor to the new and reassemble and test. It took longer to write these instructions than it did to do the job.
Hint: if the microwave is over a stove lay a towel across the stove to catch any screws that may fall.
Good luck and enjoy your fully functional microwave!
Other Parts Used:
Bryan from LAKEVILLE, MN
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
5 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Turntable Motor burned out
Unplug microwave Remove bottom of Microwave with phillips screwdriver. Remove connecting wires to Motor Remove Motor (2 Screws) with Torx Wrench. Transfer seal from old motor to new moter Re-install motor Connect wires Reinstall Bottom of microwave Plug back into outlet
Ask our experts a question about this part and we'll get back to you as soon as possible!
6 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Marcia
February 20, 2020
Turntable turns very slow even with the door open and will not cancel. Will stop only when un-plugged. A code appeared on digital readout : Fie4. Thanks in advance for your assistance.
For model number WMH31017AS2
Hello Marcia, Thank you for the question. The F1E4 Error code indicates the Power Relay has failed the the Control Board, PartSelect Number PS11757034 will need to be replaced. We hope this helps.
Hi Harlan,
Thank you for your question. We provide our parts with a one year warranty. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Mel
September 11, 2019
What microwave turntable motor do I purchase to replace a bad one for this particular model?
For model number KMHC319ESS0
Hi Mel,
Thank you for your question. The part number listed under your model number for the turntable motor is PS11755189. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Jay
July 3, 2022
Does this turn table motor, (shown to fit a GMH3204XVB "2" model) ALSO FIT a GMH3204XVB-1?
For model number GMH3204XVB-1
Hello Jay, thank you for your question. Yes, the Motor PS11755189 you had chosen is compatible with your model. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
Was this helpful?
Thank you for voting!
Jose
May 6, 2023
I bought the microwave (whirlpool) motor turn plate, but later fond out the motor works, but the tri-part plastic piece is broken,(where the plate seat to turn when activated), but don't know what part number is the piece.
For model number Part # WPW10466420
Hello Jose, thank you for your question. We believe you are looking for Drive Coupling PS3507976. We are pleased to have been able to help.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11755189
Manufacturer Part Number: WPW10466420
