ORIFICE SPUD

Hello, thank you for inquiring! Unfortunately we do not have any information on the 119L number, but we can give you the specifics on where each orifice goes to assist you in determining which is correct for you! PS11758967 is the front left, PS3650580 is the back left, PS954100 is the middle (the part title says it is for the left rear, however your model specifically states it goes in the middle), PS240692 is the back right, and PS240683 is the front right. We hope this helps!

Hello David, thank you for your inquiry. In order to convert your model from LP to natural gas, you may require replacing the orifices for your model and adjusting the pressure regulator. To adjust the pressure regulator: Use an adjustable wrench to unscrew the hex-nut cap. Remove the protective plastic cap off the threaded metal cap. Turn the metal cap counter-clockwise so the type of gas being converted to is displayed and replace the protective plastic cover. Screw the hex-nut cap back into the regulator. The orifices do not come separately. They come with the orifice holders. Following is the list of the orifice holder with their respective location: 1. The orifice holder, part number PS11729117, for the left front burner. 2. The orifice holder, part number PS11773941, for the right front burner. 3. The orifice holder, part number PS11729118, for the left rear burner. 4. The orifice holder, part number PS11729121, for the right rear burner. 5. The orifice holder, part number PS11771873, for the center burner. Glad to be of assistance!

Hi Chris, Thank you for reaching out. To convert the stove top you will need to replace the Spuds. The oven you will just need to adjust the pin on the Oven Valve. We hope this helps!

Hello, thank you for inquiring. On your model there are three different Orifice Spuds for natural gas. Orifice Spud part PS6447635 (one), part PS6447634 (three), and part PS3650580 (one). We hope this helps.

Hello Rich , thank you for your question. On your model there are three different Orifice Spuds for natural gas. Orifice Spud part PS6447635 (one), part PS6447634 (three), and part PS3650580 (one). We hope this helps.

Hello Kelly, thank you for your question. To go back to Natural from Lp gas, you need to replace the Tubing as the orifices are included and only sold that way. The Central holder is PS11736368, Right Front PS11736369, Right Rear PS11729119, Left Rear PS11736377, Left Front PS11729118. We hope this helps.

Hello Wayne, thank you for your question. To change the unit back to Natural Gas the orifice holder assemblies would have to be replaced. Those are ORIFICE HOLDER Part Number: PS4704187, ORIFICE HOLDER Part Number: PS4704185, ORIFICE HOLDER LF Part Number: PS3654162, ORIFICE HOLDER Liner OR lower Part Number: PS1481270, and ORIFICE HOLDER Part Number: PS4704186 for the top burners. And for the oven you would have to replace ELBOW BAKE UPPER Part Number: PS8754708, ELBOW BAKE LOWER Part Number: PS8754709 and ELBOW DUAL CAVITY Part Number: PS8754723. I hope this helps.