Evaporator/Condensor Fan Grommet WR02X10098

Official part for General Electric, Hotpoint, Kenmore

★★★★★
★★★★★
(4)

Easy 

30 - 60 mins 

Install video
284555-1-M-GE-WR02X10098 -Evaporator/Condensor Fan Grommet
Part Location Diagram of WR02X10098 GE Evaporator/Condensor Fan Grommet
See part 615 in the diagram
Replacing your General Electric Refrigerator Evaporator/Condensor Fan Grommet
( Grid squares measure 1x1 inch )
284555-1-S-GE-WR02X10098 -Evaporator/Condensor Fan Grommet 284555-2-S-GE-WR02X10098 -Evaporator/Condensor Fan Grommet 284555-3-S-GE-WR02X10098 -Evaporator/Condensor Fan Grommet Part Location Diagram of WR02X10098 GE Evaporator/Condensor Fan Grommet Replacing your General Electric Refrigerator Evaporator/Condensor Fan Grommet
Proudly Canadian
OEM badge Official OEM Part
$17.70
Special Order
 Fits your GSS25LSWCSS!

About This Part

What it does. Why it matters. Everything you need to know for an easy fix.

Evaporator/Condensor Fan Grommet Specifications

This evaporator fan motor grommet, or condenser fan grommet is built for refrigerators. It provides a cushion between the fan motor and the motor mounting bracket. It is made or round, black plastic and is approximately one inch in diameter. If your grommet is torn or damaged and you are getting noise from the fan motor, you may need to replace it. This is an OEM part sourced directly from the manufacturer.
Part #WR02X10098
Manufactured by GE for General Electric, Hotpoint, Kenmore

You May Also Need

Because heroes deserve fewer surprise re-installs.

$16.74
Special Order
$95.07
Special Order
Compression Ring – Part Number: WR02X12149
Compression Ring
Part #WR02X12149
$13.95
Special Order
$26.85
Special Order
$34.95
In Stock
$29.95
In Stock
$35.15
In Stock
$35.95
In Stock
$35.15
In Stock

Genuine OEM: Original Parts. Lasting Repairs.

Because quality isn't optional.

OEM stands for Original Equipment Manufacturer. This means that the company who made your appliance is also supplying the replacement part.

How Buying OEM Parts Can Save You Time and Money
Features OEM Generic
Genuine brand name
Guaranteed to fit
Superior Quality
Long term value

Part Videos

Watch our pros, then fix it yourself.

Replacing your General Electric Refrigerator Evaporator/Condensor Fan Grommet

Replacing your General Electric Refrigerator Evaporator/Condensor Fan Grommet

About this fix

Common problems and models this part fixes.

Easy 

30 - 60 mins 

Rated by verified customers

What this part fixes:
  • Noisy
  • Fridge too warm
  • Freezer section too warm
  • Clicking sound
Works with the following products:
  • Refrigerator
Part# WR02X10098 replaces these:
AP3647189, 772715, WR02X10822, WR2X10098, WR2X10822

Customer Reviews

Real ratings from other people who bought this part.

Average Rating:

★★★★★
★★★★★
4 Reviews
4.8

Out of 5

  • 5 Stars
    3
  • 4 Stars
    1
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0

Search reviews left by others. DIY doesn't mean you have to do it alone. Use simple keywords like "fit", "broken", "easy", or "quality" to find reviews that match!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
  • 1
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Mehdi A - March 6, 2019
  Verified Purchase
Works Well
Took about 4 days and part arrived. I received an email telling me the part was delivered with an installation video link attached to it. Easy install and the part works well.
★★★★★
★★★★★
Linda W - May 10, 2024
  Verified Purchase
Quick delivery; excellent service
Easy ordering process. Quick delivery. Fridge was working properly again. I am very thankful i did not have to buy a new one. Cost of repair was under $125 CAD!
★★★★★
★★★★★
Konstantinos N - October 25, 2019
  Verified Purchase
Worked like a charm
The fan and my sanity are back in place
★★★★★
★★★★★
Bernard D - July 27, 2023
  Verified Purchase
Easy to install, problem fixed
The fridge's heat exchange fan was starting to make noises caused by the external grommet no longer supporting it correctly. Replacing the grommet was simple and eliminated all of the unwanted noises. A bit pricey for such a small plastic part, but it did fix a 30+-year old fridge. Thanks!
  • 1

Repair Tips

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!

Easy 

30 - 60 mins 

Average repair rating from 17 real customers like you

Sort by:
  • 1
  • 2

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sorry, we couldn't find any existing installation instruction that matched.
Condensor fan out of service
50 of 62 people found this instruction helpful.
  • Joel from Childress, TX
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Pliers
The only part that I should had used was the condensor fan motor,which it was so easy to remove,and instaled the new one,then replaced the missing parts and problem solved. The technician before me,declare the unit a total loss,there for after doing that, he took the rest of the parts with him for his own benefit. The repair was with no difficulty,and time spend around 20 min. Thanks.PartSelect,your delivery and easy way to place an order is great. Thanks. Joel
Read less
Was this helpful?
Thank you for voting!
The condensor fan in the unit appeared to have been chewed by a mouse and would not function and the lower door was too low.
20 of 31 people found this instruction helpful.
  • Eugene from Marion, TX
  • Easy
  • 1- 2 hours
  • Screw drivers, Socket set
The condensor fan in the unit appeared to have been chewed by a mouse and would not function. We had a service call to verify this and ordered the parts. Delivery was extremely quick and we were able to complete the repair and place the unit back into service within 2 hours.

All that was necessary was to remove the bottom cardboard cover, replace the fan and grommets, and replace the door bushings.

Thanks!!
Read less
Was this helpful?
Thank you for voting!
my condensor fan made squeeking noise
16 of 25 people found this instruction helpful.
  • Andrew from Johnstown, CO
  • Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
took one screw that held the whole fan housing on, its a tight fit to try and pull it out cause of the copper lines in the back so I just turned it enough to where I could get to the 2 screws on the fan bracket, took the old fan and the rubber grommets out and replaced them! Put everything back together and works like new! Nice and quite! Plus I saved about $200-300 if a tech. would have came and fixed it!

A. Gustafson
Colorado
Read less
Was this helpful?
Thank you for voting!
Motor was squeezing. Needed to be replaced.
14 of 14 people found this instruction helpful.
  • Mark from BENICIA, CA
  • Really Easy
  • 30 - 60 mins
  • Socket set, Wrench (Adjustable)
Easy Peasey. Had to make one adjustment 24 hours later. Set the fan too far into the shroud. After the adjustment it works great!!!
Was this helpful?
Thank you for voting!
A rat had chewed half of all four blades off
9 of 18 people found this instruction helpful.
  • Curtis from Dothan, AL
  • Really Easy
  • Less than 15 mins
  • Nutdriver
First I removed the left condensor fan motor bracket nut, loosened the right motor bracket, dropped the moter bracket down freeing the motor from the rubber grommets.
Pulled the fan off from the motor shaft, pressed the new fan on the shaft and installed new grommets. Replaced the motor bracket and tightened the right bracket nut and checked fan for clearance and free spin. Reinstaled the left bracket nut. Turned on the refrigerator and checked fan for action. Everything worked great.
I did not know the fan replacement came with a compression ring already installed, so now I have an extra compression ring.
Read less
Was this helpful?
Thank you for voting!
Noisy freezer fan
6 of 9 people found this instruction helpful.
  • Robert from PITTSBURGH, PA
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Pliers, Screw drivers
Fast and easy-great video instructions for each part ordered.
All parts perfect fit.
My refrigerator is running like new again-good for another 10 years!
Was this helpful?
Thank you for voting!
Loud screeching noise from freezer during cooling cycle
5 of 5 people found this instruction helpful.
  • Gabriel from WASHINGTON, DC
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Pliers, Screw drivers, Socket set
I replaced the fan motor and one of the grommets. When I took the motor out it was clear it was failing because there were metal flakes from the motor on the fan blade. I followed the instructions on the posted video. My model did not have a removable bottom tray in the freezer so that was one less thing to do. Aside from that the video was accurate. I had two minor problems during reinstallation. First, it was very difficult to get the spring clamp back on the fan blade without pushing it against the motor. Recommend you get someone to help hold the spring open while you push it on. Second, the length of wire on the replacement was not exactly the same as the original and I had to move some wires around. Recommend you take a picture of the cable layout before disassembling.
Read less
Was this helpful?
Thank you for voting!
Noisey Compressor Cooling Fan
5 of 5 people found this instruction helpful.
  • Robert from TUCSON, AZ
  • Really Easy
  • 30 - 60 mins
  • Nutdriver
Wow, end result was amazing. I had to place my ear close to the refrigerator to find out if the fan was working. So quiet. Prior to this we could hear it in the bedroom. I replaced the fan motor, blade, grommets, i.e. the whole fan train. There were two screws holding the fan which were removed. (After removing the back panel.) Then removed the old blade and dust cap. Detached the wiring harness at the junction. Then reassemble in the reverse order. I screwed up the 1st time...installed the front motor grommet in reverse. Fan blade was not centered. Resulted in a few mins rework. Actually spent more time cleaning all the dust from the compartment and behind the refer than it took to install the new fan system. Did I say that I couldn't be more pleased with the no noise result?
Read less
Was this helpful?
Thank you for voting!
noise from fan blade hitting refrigerator interior panel.
4 of 4 people found this instruction helpful.
  • Dennis from LEHIGHTON, PA
  • A Bit Difficult
  • 1- 2 hours
  • Nutdriver, Pliers, Screw drivers, Socket set
The hardest part of the repair was emptying the freezer, next was getting the fan off of the motor shaft, The only reason the job was difficult is because i am 67 years old and not as flexible as i used to be.I had a tough time getting the fan off of the motor shaft, but i got it off with the use of a vise, and had to use the hammer and a socket to install a new fan blade.
Read less
Was this helpful?
Thank you for voting!
Noise from Condensor Fan and Fan Motor.
3 of 3 people found this instruction helpful.
  • Kevin from BENSALEM, PA
  • Really Easy
  • 30 - 60 mins
  • Socket set
I watched the video provided by PartSelect twice, then proceeded with the removal and installation. It took me 40 minutes from start to finish. Piece of Cake. Everything works fine now.
Was this helpful?
Thank you for voting!
  • 1
  • 2

DIY Questions and Expert Answers

4 questions answered by our Repair Experts.

Ask our experts a question about this part and we'll get back to you as soon as possible!

We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jim
November 19, 2017
Does this include two bushings?
Chris Boyle Profile
Hi Jim, Thank you for the question. The Bushings are sold individually. Hope this helps!
7 people found this instruction helpful.
Was this helpful?
Thank you for voting!
Susanna - For model number GTS18FBRERWW
September 2, 2019
What on earth is the difference between this and wr02x12008? I have replaced my fan motor but it’s making an awful grinding noise.
Chris Boyle Profile
Hello Susanna, Thank you for the question. The WR02X10098 is shown in the Condenser fan diagram and is used for the Condenser fan. You will need the Grommet for the Evaporator fan in the freezer WR02X12008. Hope this helps!
2 people found this instruction helpful.
Was this helpful?
Thank you for voting!
Reynalda - For model number Ham 25gftgsa
June 24, 2019
I have replaced the fan motor condenser and one thermostat on fridge and my fridge is still to warm spoiling all my food
Chris Boyle Profile
Hello Reynalda, thank you for your question. We would recommend testing the sensor, defrost heater, defrost thermostat and the evaporator fan motor. I hope this helps!
1 person found this instruction helpful.
Was this helpful?
Thank you for voting!
Tim - For model number 106.70262990
January 13, 2022
I want to replace the condenser fan and the evaporator fan grommets for my kenmore fridge model 106.70262990. I cannot seem to find the correct part numbers for the grommets. Any help would be much appreciated. Thank you.
Chris Boyle Profile
Hello Tim, thank you for writing. The Condenser Fan Motor Kit is PartSelect Number PS395284. The Evaporator Fan Blade PartSelect Number PS11738954. The Nut is not sold separately. It is sold in Evaporator Fan Blade Kit PartSelect Number PS304684. We hope to hear from you soon.
No Longer Available
Evaporator Fan Blade Kit
$115.19
In Stock
Refrigerator Condenser Fan Motor Kit
$66.96
In Stock
Freezer Evaporator Fan Blade
Was this helpful?
Thank you for voting!
Additional Links:
https://youtu.be/CMJ6gk4a7EY
  • 1

This Part Also Fits These Models

Don't see your model? Use our Fit Checker to confirm!

Check Part Fit
Part #WR02X10098
Brand
Model Number
Description
General Electric
31181-1
Refrigerator
General Electric
31191-1
Refrigerator
General Electric
3210-00L0S00-A
Refrigerator
General Electric
3210-00R0S00-A
Refrigerator
General Electric
36211XBMBRWW
Refrigerator
General Electric
36211XBMDRWW
Refrigerator
General Electric
36211XBMERWW
Refrigerator
General Electric
36211XBMFRWW
Refrigerator
General Electric
36211XBRERWW
Refrigerator
General Electric
36211XBRFRWW
Refrigerator
Kenmore
36348042891
Refrigerator
Kenmore
36348042892
Refrigerator
Kenmore
36348042893
Refrigerator
Kenmore
36348042894
Refrigerator
Kenmore
36348042896
Refrigerator
Kenmore
36348042897
Refrigerator
Kenmore
36348047891
Refrigerator
Kenmore
36348047892
Refrigerator
Kenmore
36348047893
Refrigerator
Kenmore
36348047894
Refrigerator
Kenmore
36348047896
Refrigerator
Kenmore
36348047897
Refrigerator
Kenmore
36348252891
Refrigerator
Kenmore
36348252892
Refrigerator
Kenmore
36348252893
Refrigerator
Kenmore
36348252894
Refrigerator
Kenmore
36348252896
Refrigerator
Kenmore
36348252897
Refrigerator
Kenmore
36348257891
Refrigerator
Kenmore
36348257892
Refrigerator
Evaporator/Condensor Fan Grommet
$17.70
Special Order
✖
Stock Status

In Stock

Item is in stock and is estimated to be delivered in 2-3 business days via Standard Shipping.

On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.