This part is the replacement suspension rod and spring assembly for your washer. The rod is approximately 27 inches long and is sold individually. The suspension rod and spring works something like a shock absorber and prevents the washer tub from shaking too much while the washer is operating. If you notice excessive shaking or vibrating, or if you notice a strange sound while the washer is running, you may need to replace the suspension rod and spring assembly. This is an OEM part sourced directly from the manufacturer.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Washer.
This part works with the following products:
General Electric.
Part# WH16X544 replaces these:
AP2046168, 278886
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
5.0
Filter By Rating:
5 Stars
1
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Tyler G - November 10, 2021
Verified Purchase
Super Fast Shipping and Worked Great!
Ordered and received within 3 business days. Part worked perfectly, was replaced within 30 minutes (thanks to the videos on this site), and I will definitely buy from PartSelect again!
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.6 / 5.0, 3 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Wasing machine strted to make horrible
took it appart and found that the suspension rod was broken. went on line an ordered the parts. The parts arrived 3 days later. Installed the parts and the washing machine was working within a half hour.
Only took 2 days to ship. Took the screws out of the bottom rear panel to gain access to bottom of tub. Next pushed the two hidden tabs with flat screwdriver in the front to gain access to the top of tub, they are located straight inline with each side of the washer lid in seam between the top panel and the front side panel of washer. Then installed the new suspension rod and reassembled. You can find online videos that show how to disassemble appliances if you're not sure how to get them apart for repair. My first appliance repair was easy to do and saved a lot of $$$ vs paying for repair or purchasing a new unit.
Other Parts Used:
Chris from Tampa, FL
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
12 of 17 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
washer makeing banging noise
Remove top of washer, 2 screws,support washer tub use wood block,s to support washer tub, remove old support rod replace with new, that's it, replace top, done. Thank You
Other Parts Used:
Joseph from Eastnorthport, NY
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
6 of 13 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Selim
January 28, 2020
I see two suspension & rod assemblies in my washer (wwse5240g1ww) that look identical. They both have Green bottoms. The diagram suggests there is a ps960673 rod & spring assembly Green and a ps270537 suspension rod & spring assembly which seems to have a black piece on the bottom.Are these really two different parts or do some machines have 2 of the ps960673 which is what mine looks like? i also checked the ge parts site and they don't even list the ps270537 (mnf #: wh16x544) when searching via the diagram.
For model number WWSE5240G1WW
Hi Selim, thank you for your question. You have four rods all together on your appliance. You would have two of each of the rods listed for your appliance. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
David
February 5, 2020
Does this washer only have 2 suspension rod & springs and do they come with the necessary bushings? Is there a left and a right rod and how do i know the difference.
For model number ghwp1000moww
Hello and thank you for writing.
These four rods all together on your unit. You would have two of each of the rods listed for your appliance. Rod set PS270537 (black) and rod set PS270536 ( yellow ) As they are different colors you replace them with the exact same colors of the old rods.
For your convenience, we have attached the link to our repair video. We hope this helps. Good luck with your repair.
https://www.youtube.com/watch?time_continue=3&v=cc5Xx4W2_sc&feature=emb_title
You said i need 4 rods. I was wondering why the schematic only shows 2 ?
For model number suspensio
Hello and thank you for writing.
There are 2 suspension rods PS270537 and 2 suspension rods PS270536, two on the left and 2 on the right, the diagram only shows the 2 front ones as the other ones would be behind them. We hope this helps. Please contact us anytime if you require further assistance.
What would cause the tub jump off the suspension rod on a regular basis?
For model number S2100E4WW
Hi Michael,
Thank you for your question. If the tub is always coming off the suspension rods, the load in the washer may be unbalanced and you will need to check it when this happens and make sure the clothes are evenly distributed throughout the tub. If this is not the issue, there are some parts that you will need to check to see which one is causing the issue. You will need to check the tub dampening strap, the agitator coupling kit, the tub cover, the suspension rods and spring assembly, the inner tub base hub, the socket rod supports, the tub dampening strap retainers and the split ring. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Joe
September 30, 2019
Where can i purchase the tool/wrench to remove the large nut below the agitator so i can remove the tub?
For model number WLSR3000G6WW
Good Day Joe. Thank you for your question in regards to your unit (Model Number WLSR3000G6WW). We unfortunately would not have this information and would recommend checking with a hardware supplier in your area for further assistance. Best Regards.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
This part is a replacement socket rod support for your washer. The socket rod support is found at the top of the washer frame in the front part of the washer. It supports the suspension rod, so the rod can prevent the tu...
This part is the replacement suspension rod and spring assembly for your washer. The rod is approximately 27 inches long and is sold individually. The suspension rod and spring works something like a shock absorber and p...
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Having a problem with a funky-smelling washing machine, or one that just doesn't seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This powerful washing help...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Spring or Shock Absorber","title":"Spring or Shock Absorber","url":"/Washer-Springs-and-Shock-Absorbers.htm"},{"position":2,"name":"WH16X544","title":"WH16X544","url":""}]
