Window Frame Assembly WB55T10086

This part is designed to replace your inside panel(s) of glass, closest to the oven itself. Ours cracked after many years of use and over time, cracked even more. The part was shipped quickly and came well packaged and ready for installation. The installation itself is very easy and took 30 minutes. It would have taken less time if we hadn't stopped and taken the opportunity to clean some of the other parts we removed to get at this glass. In this repair, you will remove two layers of glass to get to this part so you may as well clean the other layers while they're accessible. You'll need a torx bit and a nut driver -- that's it. Pro tip: when removing the first set of fasteners that hold the outer oven door to the rest of the door assembly, remove the three bottom screws first. They hold the bottom of the door via small and somewhat bendable metal tabs which won't support the weight of the door if you remove the four side screws first. Good luck and don't worry -- this one's easy.