Selector Knob

Simply removed the old knob and pressed the new one in place.

I removed all the knobs and then pulled the stove out. I then unscrewed everything starting at the top of the stove and exposed the thermostat control. I followed the thermostat line and continued to remove screws and panels until it was completely exposed. I followed the line into the stove and removed the end of the thermostat. I then unscrewed the control and removed the item completely. Then I screwed the new thermostat control in place and proceeded to thread the line until I had it in its proper location in the oven. I then replaced all the parts, cleaning everything before I returned them into place.

Pulled off old unreadable knobs. Cleaned area and pushed on new readable knobs.

all I had to do was push the new knob onto the metal post (it will only go on one way as it is "D" shaped) and now it works fine.