Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
James
November 21, 2019
Our oven has stopped heating. When its turned on you can hear the relay clicking from time to time. I have replaced the heating prob and both elements. Still nothing. Can you help?
For model number 790.93019310
Hello James,
Thank you for your question. Our sources suggest that the electronic control board for your model under part PS1528269 needs to be replaced. Hope this helps!
The oven will wihtout notice increase temperature to very high then have to turn down to extremely low to get @ 350 degrees. Same thing happening with burners. Will suddenly go high nad have to turn knob way down to get medium temperature. Never right away, happens after cooking or baking for a little while. Is there a control board or something that i can change?
For model number Frigidaire Model FFEF3003NWC
Hello Brad thank you for writing .
Solution: The burner temperature control knob on the stove is defective and needs to be replaced. On certain models an entire control board may need to be replaced, which sounds like it is the case on your unit .we also suggest to call the manufacturer and see if there are any known issues, defects or recalls. Hope this helps. Contact us anytime.
Was this helpful?
Thank you for voting!
Cathy
September 12, 2017
I was cooking on my Tappan stove and was also baking without any warning the stove burners (all) stopped heating and the oven also quit. We checked the breaker no luck getting it to work.I am hoping that you can give me some insight to my problem.
For model number Tef351ewe
Hi Cathy,
Thank you for the question. There might be an issue within the wiring of the appliance. If there is no power going to the appliance I would check the terminal block first to see if there is any visible damage or burn marks. It could also be the outlet the stove is plugged into. There is no one part that would control all of the elements on the cooktop and the oven unless the stove is not getting power. If you have an multi meter you will be able to test for continuity in the power cord and the terminal block.
Hope this helps
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS2333392
Manufacturer Part Number: 5303935271