This ice container assembly is a genuine OEM replacement part for your refrigerator. This kit includes the container that holds the ice, along with the auger and blades. Replacing this assembly is an easy repair that does not require any tools. First turn the ice maker off, then remove the old container from the freezer. Line up the connector with the auger yoke, then slide the new container into place. The ice maker can be turned back on, and you will be all set.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Frigidaire Refrigerator Ice Container and Auger Assembly
Troubleshooting
This part fixes the following symptoms:
Ice maker won’t dispense ice | Ice maker not making ice | Ice maker dispenses too little ice
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Lidia M - May 12, 2021
Verified Purchase
Quick delivery! Works as expected.
The part was well packed in perfect condition. Works very well in my Frigidaire. Dispense ice like it suppose to.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 5.0 / 5.0, 19 reviews.
What's this?
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Ice dispencer would not work
At first I took our apart, and tried to fix the feed wheel. I did something wrong putting it back together because even though it feed ice, it would not crush ice. Less that a week later the whole thing jammed. I really did not know what was wrong with the unit, so I was pleased to find an entire assembly for a lot less that an in-home repair would have cost. The part arrived early in it's estimated time table. I simply pulled out the old unit slid in the new, transferred the ice into the new unit and that was it. I was up and running, my wife was thrilled and I was a hero. THANKS!!!
Other Parts Used:
Richard from Bristol, CT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
90 of 106 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The in the door ice dispencer would not dispense ice since the auger wasn't working properly to push the ice through the door.
Pulled the old ice container assembly out and discarded it and inserted the new one. It immediately worked and now dispenses both crushed and cubed ice through the door.
Other Parts Used:
Thomas from Pineville, LA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
28 of 33 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice dispenser was not working
I ordered the complete part and installed in about 10 minutes. The order went very fast, part was in stock and everything went very smooth. PartSelect.com was very easy to work with and they have a very satisfied customer. I will definitely use PartSelect.com again. Thanks for the great service
got replacement ice container with ice crusher and dispenser in the door. removed broken one and slid in the new one like a drawer and started crushing ice right away!!
Other Parts Used:
Rebecca from Athens, AL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
11 of 14 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice dispensers (cube or crush) stopped working, plastic auger drive separated from auger shaft. Would run but not dispense ice.
Watched repair video on plastic auger repair and decided to just invest in the whole replacement unit. 45 minute vs. a 5 minute repair.....no brainer. Removed shipping materials from new dispenser, placed on counter top. Removed old ice dispenser, dumped existing ice into new dispenser. Installed new dispenser with ice back into freezer. Tested and unit now dispenses ice.. Easiest fix I've done to date.
Other Parts Used:
BRIAN from OXFORD, NY
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
7 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The Ice Crusher Did Not Work And The Bin Was Carroded From A Previous Owner
I removed the ice container found the part # on the bottom ordered a new one and installed it. It just slipped right in to place.
Other Parts Used:
Imogene from Truth or Consequences, NM
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
7 of 9 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice not dispensing
Ice was not dispensing. Examined the ice bin and auger, noted that the plastic ring that holds the auger at the front of the bin was broken all the way around. Pulled out old bin, making sure the ice fill level was raised all the way up, and pushed in the new bin. The new bin filled with ice, which promptly turned into a solid mass of ice because the ice maker was also faulty. I replaced that as well and have not had any issues.
Other Parts Used:
Will from Katy, TX
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
not despensing ice properly, Module label cover cracked over buttons in door
Took out old Ice container assembly without any tools and replaces with a new assembly. After that ice despensed properly.
replaced the cracked Module Label Cover with new one. Attached with adhesive as it was previously.
i ordered a replacement, and when it came in i took the old part off and installed the new dispenser. it works great.
Other Parts Used:
gilbert from helotes, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
3 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
would not despence ice
plug and play. removed old one, and install new one.
Other Parts Used:
bill from WESTCLIFFE, CO
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
34 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Carolyn
November 26, 2017
What causes the auger not to turn to dispense ice from the dispenser?
For model number FFHS2611LWKA
Hi Carolyn, Thank you for the question. If all the parts inside the ice bucket are intact and not damaged, I would suggest replacing the Auger Motor, Part Number: PS10057235. Hope this helps!
19 people found this helpful.
Was this helpful?
Thank you for voting!
Phyllis
April 23, 2019
My ice crusher blade broke off , what do i need ???
For model number 2535808289B
Hi Phyllis,
Thank you for your question. In order to get the ice crusher blade, you will need to replace the ice container and auger assembly. The part number listed under your model number for the ice bucket and auger assembly is PS1991430. I hope this helps. Thank you and have a great day!
9 people found this helpful.
Was this helpful?
Thank you for voting!
RICKEY BURK
April 23, 2018
The drive blade is disconnected from the drum and it wont let it dispense ice the bar and everything else works, this is my only problem can you please advise what i need to do.
For model number FFHS2322MW5
Hello Rickey, thank you for your question. If there is nothing broken, and the blade just has to be reattached, you shouldn't need any parts. This video will show you how to replace/reattach the drive blade in your appliance. I hope this helps!
https://www.partselect.com/PS1526405-Frigidaire-241684501-Drive-Blade.htm?SourceCode=1&SearchTerm=FFHS2322MW5&ModelNum=FFHS2322MW5&ModelID=6910018.
6 people found this helpful.
Was this helpful?
Thank you for voting!
Darrel
January 9, 2019
The ice is dispensed as cubes even when the crushed ice button is selected. How do i repair this?
For model number frs22zrh
Hello Darrel, thank you for your question. If you are able to switch between crushed and cubed on the display panel on the door, we would recommend testing the Crushed/Cubed Ice Solenoid Assembly - 120V 60Hz PartSelect Number: PS8691994 and the Ice Solenoid PartSelect Number: PS8691995 to see if either of these parts are faulty. These parts facilitate the switch between the two options. If those parts are working, the next step would be to test the micro switches that are up inside the dispenser. If those parts are tested and are function, the issue could be the control board in the dispenser. I hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Hal
August 13, 2019
The ice maker stops making ice intermittently. The maker drawer slides back about 1/2". If i slide the container back in, it starts making ice again. Have you got a fix for this?Thanks, hal
For model number ffsu2613lp0
Hi Hal, thank you for your question. There are two parts that you should check for this issue. The first part to test would be your water inlet valve. The valve has two solenoids that control either the dispenser or the ice maker. Even if your dispenser is working the ice maker solenoid may not be and vise versa. The valve can be tested with a multi meter and should be reading between 500 - 1500 ohms of resistance. If that part is testing correctly then you should look into your ice maker being the issue. I hope that helps. Good luck with your repair.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Phyllis
April 24, 2019
My refrigerator looks like the one in the video except..., "only has one lever" to put the drinking glass up to... the one in your video has "two levers" so is there one with one lever ???
For model number 2535808289B
Hi Phyllis,
Thank you for your question. Here is a link to one of our videos from YouTube with a refrigerator with one lever that you may reference, https://www.youtube.com/watch?v=xIICeXtGPWs. The refrigerator in the video may not show exactly like the one you have, but it will give you a general idea on where the part is located even though the part being installed is a recess door spring. I hope this helps. Thank you and have a great day!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Janice
February 1, 2019
Is this ice container and auger assembly compatible with Frigidaire model ffhs2611lbra?
For model number FFHS2611LBRA
Hello Janice, thank you for your question. Yes, the container assembly PartSelect Number: PS1991430 does fit the model ffhs2611lbra unit. This is a compatible replacement part. I hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Rosie
January 21, 2018
Is this part compatible to a Frigidaire refrigerator gallery?
For model number LGUS2642LF2
Hello Rosie,
Thanks for your question. Yes, this container and auger assembly is all of the parts for your model assembled into one unit and it is compatible.
I hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
GUY
February 15, 2019
This part is making ice, but is dispensing too much water and it over flows and leaks
For model number 240323813
Hi Guy,
Thank you for your question. If there is water leaking from the ice maker, the water inlet valve may be be malfunctioning and you will need to test it with a multimeter to verify if it is working correctly. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Peggy
February 21, 2019
Ice maker flat part front dose it stay loose show it works.Does it work
Hello Peggy, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Having a problem with a funky-smelling washing machine, or one that just doesn't seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This powerful washing help...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
