25350682000 Kenmore Refrigerator - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Water Filter – Part Number: WFCB
$81.93
In Stock
Water Filter
★★★★★
★★★★★
(14)
Part #WFCB
Manufacturer's Number: WFCB The PureSourcePlus filter fits refrigerators made before 2001, and Kenmore refrigerators with model numbers starting with 253. This filter has white ends, while the PS503619 has blue ends. May require the PS428513 wrench or PS428532 O-ring. Filters for: Taste and odor Sediment 99.3% of Lead 99.99% of Cysts 99.7% of Turbidity 99.8% of Particulates (Class I) 94.9% of Atrazine (a herbicide) 94.2% of 2,4-D (a herbicide) 97.8% of Chlorine (Class I) 87.5% of Toxaphene (a pesticide)
Defrost Timer - 60Hz 120V – Part Number: 215846602
$49.94
In Stock
Defrost Timer - 60Hz 120V
★★★★★
★★★★★
(24)
Part #215846602
This defrost timer will cycle for thirty minutes after every eight hours of run time.
Defrost Thermostat – Part Number: 297216600
$38.75
In Stock
Defrost Thermostat
★★★★★
★★★★★
(16)
Part #297216600
This authentic defrost thermostat is sourced directly from the original equipment manufacturer and is designed for use with Frigidaire freezers. It regulates the internal temperature to ensure the freezer operates within the proper range. Over time, the thermostat may develop electrical issues that lead to inconsistent performance, making replacement necessary to maintain optimal functionality. To install the new thermostat, you’ll need a screwdriver to remove the old component and secure the replacement. Be sure to consult your owner’s manual and model-specific diagrams to ensure correct installation. This high-quality part is sold individually.
Light Bulb – Part Number: 316538904
$35.95
In Stock
Light Bulb
★★★★★
★★★★★
(9)
Part #316538904
This 40-watt appliance light bulb is a reliable replacement for use in select ranges, refrigerators, freezers, and microwaves. It provides bright, consistent lighting to help you see clearly inside your appliance. Installation is simple—just unscrew the old bulb and replace it with the new one. If the existing bulb is broken, disconnect power and use needle-nose pliers to safely remove the remaining base. Sold individually, this bulb is a commonly replaced part—consider keeping a spare on hand.
Run Capacitor – Part Number: 5304464438
$58.82
In Stock
Run Capacitor
★★★★★
★★★★★
(3)
Part #5304464438
This part is attached to the compressor. It helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer.
Crisper Drawer Cover Support – Part Number: 5303288973
No Longer Available
Crisper Drawer Cover Support
★★★★★
★★★★★
(5)
Part #5303288973
This is the replacement crisper drawer cover support for your refrigerator. The crisper shelf rests on the support, which keeps it level. If your drawer cover or shelf will not stay level, or will not stay in place, the support may be damaged. The support is held in place on the refrigerator wall with a drive pin. To remove the damaged support, simply drive the pin all the way in, and use a putty knife to pry the support from the refrigerator wall. At this point, pull the drive pin out and replace the old support with the new one. This is an OEM part and is sold individually.
Refrigerator Ice Maker Assembly – Part Number: 241798231
$229.16
In Stock
Refrigerator Ice Maker Assembly
★★★★★
★★★★★
(19)
Part #241798231
This 8-cube ice maker is used to create ice for your refrigerator. The ice maker receives water from the water inlet valve and will freeze until ice cubes are formed. Once the water has been frozen the cubes will be ejected from the mold in to the ice bucket. The ice maker will continue the process until the ice bucket has reached the limit. If your ice maker is not making ice you may need to replace this part. Please remember to disconnect the power and water supply before starting your repair. This ice maker is a genuine OEM part.
Lower Crisper Drawer – Part Number: 5303289501
$198.50
In Stock
Lower Crisper Drawer
★★★★★
★★★★★
(6)
Part #5303289501
This lower drawer does NOT come with the front cover.
Screw – Part Number: 215005101
$30.95
In Stock
Screw
Part #215005101
This screw is sold individually.
Replacement Ice Maker – Part Number: 5303918277
$136.61
In Stock
Replacement Ice Maker
★★★★★
★★★★★
(8)
Part #5303918277
This part is the replacement heat-release ice maker unit only. This kit comes with four round female connectors at the end of the wire harness. It also comes with the adaptor that converts the harness to three round female and one round male connectors.
Single Solenoid Water Valve – Part Number: 218859701
$114.07
In Stock
Single Solenoid Water Valve
★★★★★
★★★★★
(4)
Part #218859701
This valve has a 1/4" compression inlet.
Dual Inlet Water Valve - 120V 60Hz – Part Number: 218832401
$146.07
In Stock
Dual Inlet Water Valve - 120V 60Hz
★★★★★
★★★★★
(1)
Part #218832401
The water inlet valve is a solenoid-operated switch and when it is energized by electrical power, water is released from the supply line through the water valve and into the compact icemaker mold or the water dispenser.

Common Symptoms of the 25350682000

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Water in Frig was tasting bad.
499 of 504 people found this instruction helpful.
  • Patricia from Fulton, MO
  • Really Easy
  • Less than 15 mins
I turned the cap for the old filter and pulled it out . Then I put in the new one in and turned the cap to secure it in frig.
Was this helpful?
Thank you for voting!
water from refigerator dispenser started tasting bad
369 of 370 people found this instruction helpful.
  • Anthony from Springfield, VA
  • Easy
  • Less than 15 mins
I removed the top shelf in the fridge. I then unscrewed the cover to the water filter and pulled the filter cartridge down into the cover. Keep the cover upright as there may be some water in it. I carried it to the sink. I took the new cartridge and ran water through it from the sink, then set it in the cover and took it to the fridg e. I pushed the cartridge up into the space that I removed the old one from and screwed the cover back on. Then I took an empty pitcher and filled it from the water dispenser in the fridge door. I did this three times to charge the filter and remove charcoal dust. Water tastes great now. I ordered two filters so I would ony have to buy once a year. Great site to order the filters from. Cheaper than other sources and delivery was quick.
Was this helpful?
Thank you for voting!
Broken ice maker
255 of 345 people found this instruction helpful.
  • Juan from Miami, FL
  • Really Easy
  • 15 - 30 mins
  • Socket set
Unplugged faulty ice maker, removed two screws holding it to the refrigerator and took it out. Reversed the operation with the new ice maker and after a few minutes presto, we have ice.
Was this helpful?
Thank you for voting!