25351392106 Kenmore Refrigerator - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Refrigerator Water Filter – Part Number: WF2CB
$106.12
In Stock
Refrigerator Water Filter
★★★★★
★★★★★
(29)
Part #WF2CB
This single water filter is designed for use in side-by-side refrigerators, positioned in the front top-right section for easy access. It utilizes a carbon-based filtration system to reduce a wide range of contaminants, including cysts, turbidity, lead, mercury, and herbicides, ensuring cleaner water and ice from the dispenser. Measuring 6 x 3 x 7 inches and constructed from white plastic, the filter is engineered for performance and ease of replacement. Common symptoms indicating the need for replacement include reduced ice production, dispensing issues, leakage, and unusual noise. The filter should be replaced every six months or after 200 gallons of use, as indicated by the red light on the freezer door dispenser. Installation requires no tools: press the release button to remove the old filter, insert and lock the new one, then run water
Crisper Cover Support - Front – Part Number: 241993101
$16.27
In Stock
Crisper Cover Support - Front
★★★★★
★★★★★
(17)
Part #241993101
This crisper cover front support is used to keep the crisper shelf in place and may need replacing if the door will not open or close. This white, OEM part measures roughly 1 inch in diameter and can be used for the front and the rear support, as designed by the manufacturer, and mounts to the inside cabinet wall. Replacing this part is an easy repair, and will require a small flat blade screwdriver, a putty knife, and a soft hammer. Remove the crisper and shelf from the refrigerator before replacing the support. The crisper cover front support is held in place with a locking pin. To remove the old part, you will first need to push the pin into the interior of the cabinet using the screwdriver, and then you can pull the support out with a putty knife. If you cannot get the pin out you can use a flat-blade screwdriver to push it down and out of sight and it will not harm anything in your refrigerator After removing the pin and attaching the new support, simply use the soft hammer to lock the new pin in place.
Crisper Support - Rear – Part Number: 241993001
$22.95
In Stock
Crisper Support - Rear
★★★★★
★★★★★
(4)
Part #241993001
This authentic rear crisper support is a white, plastic part which is rated as "easy" to install by our customers. This OEM part replaces the rear crisper cover support in your fridge and mounts to the inside cabinet wall. If there is visible damager or your crisper stops fitting properly, it may be time to replace the part. Check your user manual and model number to ensure this part is what you need. Replacing the rear crisper support in your refrigerator is an easy job. This part is made from plastic and mounts on the inside of the wall. To complete this repair you will need a small putty knife, a punch or a short flat blade screwdriver, and a small hammer. You may need to replace your rear crisper support if you find that the door will not open or close. In order to complete this repair, you will need to remove all the shelves above the crisper in order to have ample room to work. It is also good to have duct tape on hand, which can be used to protect the liner around the support. This part is sold individually. Please note that the rear and front crisper support are different parts; this is the one you are looking for if it is your rear support that needs replacing.
Door Bin – Part Number: 240363702
$94.23
In Stock
Door Bin
★★★★★
★★★★★
(25)
Part #240363702
Need more organized space in your fridge door? This clear plastic shelf bin is perfect for storing 2-liter bottles, condiments, and other everyday items. It installs easily—just snap it into place, no tools required. If your current bin is cracked or worn out, replacing it is a quick fix that helps keep your fridge tidy and your items secure.
Meat Drawer Rail - Right Side – Part Number: 240356501
$69.57
In Stock
Meat Drawer Rail - Right Side
★★★★★
★★★★★
(23)
Part #240356501
This replacement drawer slide rail is for the right-hand side of your refrigerator. This part attaches to the inside wall of your refrigerator to support the sliding crisper drawer. If the rail is broken or the drawer is not sliding properly, you will need to replace the slide rail. You will need a Phillips screwdriver to complete this repair.
Refrigerator Water Inlet Valve – Part Number: 242252702
$104.89
In Stock
Refrigerator Water Inlet Valve
★★★★★
★★★★★
(54)
Part #242252702
This part releases water from the supply line when it's activated. NOTE: This part may appear different than the original, but is an authorized manufacturer replacement.
Refrigerator Door Bin – Part Number: 240324502
$123.48
In Stock
Refrigerator Door Bin
★★★★★
★★★★★
(20)
Part #240324502
Need more space on your fridge door? This clear shelf bin is perfect for storing bottles and jars. It’s easy to install—just snap it into place, no tools needed. It fits many Frigidaire, Kenmore, and Electrolux models, but be sure to check the size of your current bin to make sure it matches. This bin is sold on its own and doesn’t come with other parts.
Hinge Bearing – Part Number: 240328201
$36.95
In Stock
Hinge Bearing
★★★★★
★★★★★
(13)
Part #240328201
Sold individually. Also known as a short door closing cam.
Door Closing Cam – Part Number: 240457701
$69.57
In Stock
Door Closing Cam
★★★★★
★★★★★
(9)
Part #240457701
Sold individually. This cam is located at the bottom of the fridge/freezer door.
Light Bulb – Part Number: 316538904
$35.95
In Stock
Light Bulb
★★★★★
★★★★★
(9)
Part #316538904
This 40-watt appliance light bulb is a reliable replacement for use in select ranges, refrigerators, freezers, and microwaves. It provides bright, consistent lighting to help you see clearly inside your appliance. Installation is simple—just unscrew the old bulb and replace it with the new one. If the existing bulb is broken, disconnect power and use needle-nose pliers to safely remove the remaining base. Sold individually, this bulb is a commonly replaced part—consider keeping a spare on hand.
Defrost Thermostat Kit – Part Number: 5303918214
$48.80
In Stock
Defrost Thermostat Kit
★★★★★
★★★★★
(17)
Part #5303918214
This kit includes the clip, leads and one heat shrink.
Door Bin – Part Number: 240359001
$74.75
In Stock
Door Bin
★★★★★
★★★★★
(5)
Part #240359001
This door bin holds items on the door of your refrigerator. They are sometimes called Cantilever Shelves as they are supported by the back of the shelf itself to the door of your refrigerator. Sold individually.

Manuals & Care Guides for 25351392106

Click to download

Common Symptoms of the 25351392106

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
yearly maintenance
623 of 666 people found this instruction helpful.
  • Antonio from Folsom, CA
  • Really Easy
  • Less than 15 mins
swap filter
Was this helpful?
Thank you for voting!
water leaking out of refrigerator
608 of 723 people found this instruction helpful.
  • Jose from Alexandria, VA
  • Easy
  • 15 - 30 mins
  • Nutdriver, Pliers, Wrench (Adjustable)
In my specific appliance the water valve is located in the bottom right hand corner looking at it from the back. To get to it I remove the thin layer of cardboard the covers the back of the fridge. I then proceeded to disconnect the 1/4" copper tubing which is the water feed coming out of the wall. Then I removed the screws that hold the valve assembly in place. I took the water valve out and removed the electrical connections as well as the plastic tubing which feed the water dispenser and the ice maker. To install the new water valve it was just a matter of reversing steps.
Was this helpful?
Thank you for voting!
icemaker stopped making ice
356 of 427 people found this instruction helpful.
  • David from New Bern, NC
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
Even though my wife said that our icemaker broke, there was actually nothing wrong with it. It was the valve that let water flow in during the 'harvest' cycle.
A real easy way to test the icemaker without voltage and current measurements, is to fill the tray by hand with a little cup of water; wait till the water freezes and see if t he maker dumped the ice into the bin.
Was this helpful?
Thank you for voting!