Product Description
Charcoal Filter Specifications
Sold individually.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Exhaust fan not working
This part works with the following products:
Microwave.
This part works with the following products:
KitchenAid, Whirlpool, Kenmore.
Part# W10120840A replaces these:
AP4301303, 1266682, W10120840A, 8205998, W10120840, W10120840A
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Blair P - November 28, 2021
Verified Purchase
Easy repair
Fast turn around
Susan R - November 3, 2021
Verified Purchase
My mistake
It was the wrong part for me but not your fault and I'm too lazy to return it. Delivery was prompt.
BRUCE T - April 16, 2021
Verified Purchase
Easy Repair
Delivery was fast and part was received in perfect condition.
Maria D - October 16, 2020
Verified Purchase
Replacement Filter
The filter was 1/2” shorter than expected but still fit. Fast service.
GARY K - September 4, 2020
Verified Purchase
Just What I needed
Could't find these Filter anywhere for my Kitchen Aide over the range microwave and Part Select had them !! they fit perfectly ...this is my second time ordering this actually, it was quite easy to order and delivery was quick.
Sheelagh G - February 27, 2020
Verified Purchase
Such Quick Service
Our order came surprisingly fast, the very next day and Shipping was reasonable. Very impressed with this company.
Jeanette F - April 9, 2019
Verified Purchase
Part Damaged
Part was damaged by bending in two places. Does not sit flat in holder as it should.
April 9, 2019
Hello Jeanette,
Thank you for leaving a review on the part ordered. I have sent you an email in regards to the order. Hope to hear from you!
Grace D - January 1, 2019
Verified Purchase
Fast shipping. A+
Fast shipping. A+
Wendy A - November 26, 2018
Verified Purchase
Fit perfect
Fast delivery and a lot cheaper then buying it at the store. Even with shipping. Will be buying again.
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 4.6 / 5.0, 5 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Fire in microwave melted several parts
Remove the filters and use a Torx driver to remove two screws holding the motor. The wires on on the motor are held in place by a plastic clamp that must be pried open on one side. That's all it takes to replace the drive motor. Everything else that makes the turntable spin lifts off from inside the microwave.
Other Parts Used:
-
duane from san diego, CA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
40 of 82 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Light and fan buttons not working
The buttons are easy to access. Disconnect the power to the oven then just remove the center grill on top of the microwave then remove the screw attaching the left side grill and remove the grill this will allow access to the upper screw holding the left side panel then open the oven door and use a long slender Torx driver to remove the two screws in the side of the panel then remove the screw holding the left side lamp cover and remove the cover and then remove the left side air intake screen this will allow access to the wiring to the switches and the connector that must be disconnected to allow removal of the side panel, the connector has a small tab that must be depressed to separate the connector, be certain to disconnect the wiring before attempting to remove the side panel as the wiring is too short to allow removal of the side panel while the wiring is connected, after the wiring is disconnected the side panel can be pulled away from the oven it is simply clipped in place and will be removed by pulling it straight toward you after the panel is removed two screws hold the switch circuit board to the side panel, the buttons are part of a fragile plastic tree that is sandwiched between the side panel and the circuit board use care when installing the replacement buttons and circuit board my replacement buttons needed to be reformed by slight hand pressure to make them fit properly. To reassemble just follow the same steps in reverse order. This is a simple operation that can be done in about an hour.
Other Parts Used:
-
Nathan from OCEANSIDE, CA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
5 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Sensors acting strange
Replace two filters underneath the microwave.
No tools requires
Repair took 15 seconds
No tools requires
Repair took 15 seconds
Other Parts Used:
-
Robert from CLERMONT, FL
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
REPLACE OLD FILTERS-2 Sets
Requires 2 sets of replacement parts. Prior filters included a charcoal filter sandwiched between 2 aluminum filters/screens (3 total parts per side). Replacement charcoal filter was already attached to an aluminum screen so just needed to add 1 aluminum screen/filter so the charcoal was again sandwiched between the 2.
Other Parts Used:
-
Robertt from MOUNT JULIET, TN
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Filters needed replacing.
Pulled filter holders out, removed filters, washed holders, installed new filters, and reinstalled assemblies.
Other Parts Used:
-
Joseph from Freeport, IL
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
MJ
June 24, 2019
What are the dimensions of this filter?
For model number 665 85920
Hello MJ, Thank you for the question. The filters are about 5 1/2" X 12". Hope this helps!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Robert
May 7, 2018
Are these filters manufactured by Whirlpool / kitchen aid?
For model number Parts: W10120839A and W10120840A
Hello Robert, Thank you for your inquiry. Yes, we show that they are manufactured by Whirlpool, who also owns KitchenAid. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Jacob
November 4, 2021
Will this fit YWMH53521HV OTR?
For model number YWMH53521HV
Hello Jacob, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number: PS1871363 for the Charcoal Filter. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Norm
April 20, 2023
What are the exact dimensions? I am trying to replace a carbon filter in a Kitchenaid dishwashers with carbon filter dimensions of 11 5/8 x 5 5/8. Thanks
For model number Charcoal filter
Hi Norm,
Thank you for your question. The carbon filter measures 5-5/8 inches by 11-5/8 inches by 3/8 inches. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Mallika
October 3, 2019
Hi...does this filter replace my existing charcoal filter. please suggest.
For model number MD959855S
Hello Mallika, Thank you for the question. Sadly, we do not have any information on the model number you provided. Could you please verify the number you provided us with? If it is correct, I recommend contacting the manufacturer and seeing if they could provide you with a part number, and then you are always welcome to check back to see if we carry the part. Hope this helps!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS1957304
Manufacturer Part Number: W10120840A
Manufacturer Part Number: W10120840A
Brand
Model Number
Description