Initially replaced igniter. Didn't think it was bad though. Read other suggestions on another website. None were the correct diagnosis for my situation. And when I figured it out they did not offer correct part. The dryer thermistor temp sensor (probe sensor) is what I replaced. Found it on Parts Select. I did replace other parts also. But that's the one that ultimately was the issue. Was not hard at all if one is even a little handy.
Other Parts Used:
Dave from SAINT JOHN, IN
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
12 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Cody
March 19, 2023
How do you test the thermostat
For model number 61423
Hello Cody, thank you for your question. To test the thermostat, you need an ohmmeter. Hold the two probes of the meter, one probe at one terminal of the thermostat and the other probe at the other end of the terminal. If the meter shows infinite or zero resistance it means that the thermostat is bad. We hope this information is useful!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Catherine
March 29, 2023
Hello is part AGM30045804 the heating mechanism part for this dryer. Problem is the clothes are not drying the heat is gone. Just making sure this is the right part?
For model number DLG7188RM
Hi Catherine, thank you for the question. The part number you provided is the dryer thermistor temperature sensor, which helps monitor and regulate the temperature inside a dryer. If the dryer is not producing heat, then this part may be defective, and you may need to replace it. However, if it is not faulty, then you may also need to check the blower thermostat, part number PS8747887, the moisture sensor, part number PS3529161, and the gas igniter, part number PS3527801. If any of these parts are faulty, you may need to replace them. We hope this helps!
I've replaced the high limit thermostat twice and was told to try installing a thermistor kit. I ordered the kit #AGM30045804 and had no trouble changing the sensor with the wire harness included. I can't find any videos on how to change the two thermostats, or thermistors (the other parts in the kit) anywhere for the model dryer I have. I found a parts diagram, and the corresponding #s for the kit, but i'm not sure where they go on my dryer. I'm assuming they don't connect to the heating element. Any help offered would be greatly appreciated!!!
Sincerely,
Missy
For model number 79681022900
Hi Missy, thank you for your question! Other two thermostats are the blower thermostats, blower thermostat is located on the blower housing of your dryer. We hope this information helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Phillip
20 days ago
What parts are in this kit ?
For model number DLE7300VE
Hello Phillip, thank you for reaching out. This kit includes 2 high-limit thermostats and 1 thermistor. We hope this information helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Perry
12 days ago
when drier goes on the gas does ignite . flame burns for 45 to 60 seconds then goes out. i will restart and same thing will happen
For model number DLGX8001W
Hello Perry, thank you for getting in touch. We would recommend checking the gas valve assembly, part number PS16878121, to solve the problem. A malfunctioning gas valve can most probably cause this issue. We hope this helps!
Hi Paul,
Thank you for your question. This would not be the correct part for your dryer. Your dryer has a thermal fuse, part number PS3530485, a high limit thermostat, part number PS3530482, and a blower thermostat, part number PS8747887. We hope this helps!
ERROE CODE d9
I have cleaned the vent fully
dryer stops 5 minutes into cycle
For model number DLEX3250V
Hello Paul, thank you for contacting us. Based on the description that you have provided, we believe you have a faulty blower wheel. Check the blower wheel. If it is not working correctly, you may need to replace it, part number PS3528491. We hope this helps.
Hi Barbara, thank you for the question. Based on our understanding of the issue, we would recommend checking the thermostat assembly, part number PS3530482, as it is most likely faulty and may need to be replaced. Please submit a new question if you have any follow-ups!
Gas dryer was working, put in load of towels on high heat and smelled burning. Then it would not heat on any setting. Ideas on the part we need?
For model number DLG1502W
Hello Nicole, thank you for contacting us. Based on our understanding of the issue, we would recommend checking the high limit thermostat, part number PS16878105, to fix the issue. We hope this helps!
Was this helpful?
Thank you for voting!
Carley
May 3, 2024
Does this part fit my dryer? (DLE2301W)
For model number DLE2301W
Hello Carley, thank you for reaching out. Yes, the high limit thermostat you mentioned is compatible with your model. Glad to be of assistance!
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS16878105
Manufacturer Part Number: AGM30045804
