Average Repair Rating: 4.6 / 5.0, 2 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Double oven, top oven would not heat on bake setting.
un plugged the electric cord. Took back panel off range. disconnected the element wires. Opened the range door removed the rack, and removed the two screws holding the the bake unit in place and removed the old element. Installed the new element in reverse order above. After reconnecting the power supply cord turned the range on and let it heat up to remove the newness order off the new element. tools needed 1/4 inch nut driver or 1/4 inch socket.
Other Parts Used:
William from FRANKFORT, KY
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lower element in the upper oven was not heating.
Prep: You need a 1/4” nut driver to remove the screws in the oven. Approx. $6.00 at the hardware store. Flashlight. Two small chip clips or clothespins.
1. Turn off power at the breaker. 2. Remove oven rack. 3. Use nut driver to remove screws and pull element to expose wires. Attach chip clips to each wire to prevent the wires from slipping behind. Remove old element. 4. Plug in the new element and make sure secure. Turn on breaker to test.
While this was a simple repair, turned out the element was not my problem. I needed a new relay board. The relay board part is not readily available, so you have to dig around the web to find one.
Other Parts Used:
Bunny from COLUMBIA, SC
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Darla
April 10, 2019
Hello, i ordered the upper oven lower bake element from you and replaced my old element because it wasn't heating. Now this new one doesn't heat either.Any suggestions on what to check next?
thank you!
For model number PB970BM2BB
Hello Darla, Thank you for the question. Normally this indicates an issue with a defective Lower Oven Relay Board, PartSelect Number PS1765866. I looked up the part and it is listed as No Longer Available/Discontinued. There is no part substitutions listed. My suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
John
28 days ago
Is there a way to test the lower element in the upper oven to determine if it’s the problem with preheating very slowly? It gets hot but slowly.
For model number JB860EJ6ES
Hi John, thank you for contacting us. The bake element for your model can be tested. In order to test the bake element. Remove the heating element. Set the multimeter to the lowest ohms of resistance. Touch one probe to one of the terminals. Touch the second probe to the remaining terminal. If the element has continuity, the multimeter should read anywhere from thirty to a hundred ohms. If there is no continuity, the element is defective and must be replaced. We hope that helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Craig
November 21, 2017
I just need the spacer that goes between part wb44t10085 & the back of the oven.
For model number PB975SM2SS
Hi Craig,
Thank you for your question. That part that you are talking about is part of your bake element. You would need to replace your bake element to replace that specific part of the bake element. Good luck with your repair.
Was this helpful?
Thank you for voting!
Gerald
January 23, 2019
G e range serial # t2265573q the lower element dont look the same as mine
For model number jb85odt1ww
Hello Gerald, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is Part Number: PS2370382 for the lower oven bake element and PartSelect Number: PS1517609 for the upper oven bake element. Thank you for your inquiry, good luck with this repair!
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Our scratch-free, streak-free formula removes fingerprints, smudges, grease, dirt and oil, while protecting and polishing to repel dust and dirt. Use on all stainless steel appliance brands and surfaces. Stainless Steel ...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS1517609
Manufacturer Part Number: WB44T10085
