Average Repair Rating: 2.3 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Water not turning off; spring broken off of dispenser lever.
Replacement of Paddle Ice Disp Bk (#70) with Torsion Spring (#74) --- Pry off bezel with putty knife. Remove control panel. Disconnect connectors. Unscrew (4x) plastic Housing. IMPORTANT: Funnel Ice Disp (#69) MUST be removed from Housing Shield Disp (#58) in order to rotate new part #70 to remove/install. May be tricky as stuck together with age and gunk. Note flat on axle of switch arm of #70; must rotate fully to remove/install part. Install new part with spring, and reassemble. NOTE: there are (at least) two types of bezels: one with spring tabs on the sides that must be felt and pushed in to remove without breaking, and another (mine) with rigid tabs on all sides that must be gently pried to pop out.
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
David Mckibbin
December 4, 2017
I believe your answer is wrong on part# ps1483166. Spring #63 goes to part #67, and spring #74 goes to part #70, so the correct answer to the question is yes, this is the correct spring for the paddle ice dispenser bracket.
For model number GSHF5KGXDCBB
Hi David,
Thank for getting back to us regarding this. You are correct, the spring, part number 63 in the diagram, does work on the dispenser door recess crank, part number 67 in the diagram. And the torsion spring, part number 74 in the diagram does work with the dispenser ice paddle, part number 70 in the diagram. I apologize for any confusion this has caused.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Claude
November 24, 2017
Is this part the correct part to keep the back part that the glass is used to activate the switch to get water or ice? The spring keeps the part forward to turn of the ice or water off.
For model number PSDS5RGXCFSS
Hi Claude, Thank you for the question. The spring you need is,Part Number: PS285013. Hope this helps!
Was this helpful?
Thank you for voting!
Russell
January 7, 2022
What is the correct replacement part number for the paddle spring of the ice/water dispenser for Model PFSS6PKXFSS?
For model number PFSS6PKXFSS
Hello Russell, Thank you for the question. The Spring and any other parts to the Ice and Water Chute are only sold as part of the Refrigerator Dispenser Ice Chute Door and Funnel Assembly, PartSelect Number PS2359937. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
This door recess spring or dispenser lever spring in your refrigerator is used to return the ice door to the closed position or the dispenser lever to the home position once released. You will find the spring in the wate...
The door recess crank for your refrigerator is located inside the water dispenser assembly. To access this part, you will need to take apart the dispenser assembly. To do this, you will need a putty knife and a Phillips ...
This part mounts in the ice dispenser. The crank no longer comes with this part but you can use original crank. The crank is sold separately depending on the model number of your appliance.
