This part is a replacement control knob for your washer. The control knob allows you to select the desired setting for your wash cycle. If your washer will not start or the timer will not advance, you may need to replace the control knob. Occasionally the control knob will become worn, and when this happens the control knob dial will not turn, and you will not be able to select the appropriate setting. If your control knob is worn, broken, or missing, you will need to replace it. The control knob is made of white plastic and is approximately 2 inches in diameter. The control knob is sold separately from the control knob dial, so be sure to confirm which part you need to complete your repair.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Hotpoint Washer Timer Knob
Troubleshooting
This part fixes the following symptoms:
Will Not Start
This part works with the following products:
Washer.
This part works with the following products:
Hotpoint, General Electric.
Part# WH01X10314 replaces these:
AP3995432, 1264407
Customer Reviews
Average Rating:
★★★★★
★★★★★
2 Reviews
5.0
Filter By Rating:
5 Stars
2
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Basil C - October 17, 2020
Verified Purchase
Great service!
The timer knob for our Hot point washer shipped the same day we submitted the order and was at our door 2 business days later!
★★★★★
★★★★★
Dave M - December 3, 2019
Verified Purchase
It works!!!
It worked and now we don’t have to use a pair of pliers to do laundry.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 5.0 / 5.0, 3 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
the teeth wore out on the control knob
I used needle-nose pliers to remove the lock tab and , in seconds, I replaced the knob !!!
Other Parts Used:
Dave from West Warwick, RI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
23 of 33 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer control knob and control knob broken
My son, Eddy did the repairs. He used a flat head screwdriver and a pair of pliers to remove the broken parts on the shaft. He lined up the new washer control knob dial with the notch, and pushed it down into place. Next, he lined up the new control knob, and placed it onto the metal shaft. The washer works like new again! Very easy removal and installation! Thank you for your Fast Shipping, Great Prices and Available Parts Line!!!
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Diane
September 25, 2017
This model isn't showing up but what I need I'm not seeing in the diagrams. There is a black plastic sleeve, the teeth line up with the white knob teeth. Has to be pushed in and turned. Can you find the correct piece for me?
For model number HTWP1400WW
Hi Diane, Thank you for the question. The black part you are looking for is part of the timer assembly, PartSelect Number PS4704240 and is not sold sepratly. Hope this helps!
Hi, my washer model is gb gbsr1060t, the knob can be used for it?
Hi Lai, thank you for your question. If you are looking for your Timer knob and not one of the others, I have linked the correct part down below for you. Good luck with your repair.
Control knob will not engage selector knob. The bevel clutch on knob has nothing to engage with on selected dial.
For model number Htwp1200doww
Hello Steve, Thank you for your inquiry. We would recommend checking the following parts to fix your issue: Compression Ring, Timer Knob Clip, and check to make sure that the knob itself is not cracked or broken. Hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
