GE/GE_Thumb/00128486i02.gif
See part 156 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.ca

Vision Burner - Extra Large

★★★★★
★★★★★
1 Review
$48.16   Special Order

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your C2S985SET5SS!
 Fits your C2S985SET5SS!
PartSelect Number PS1480987
Manufacturer Part Number WB16K10062
Manufactured by GE
Product Description

Vision Burner - Extra Large Specifications

This is a replacement vision burner or surface burner head for your gas range. It is silver in color and approximately 4.5 inches in diameter. This burner is sold individually. The burner head distributes gas to create an even flame across the cooking area. If you notice that your food is not cooking evenly, or you are not getting an evenly distributed flame, you may need to replace the burner. The burner is located beneath the burner cap, below the grate. To remove the burner, simply remove the grate and the burner cap, then lift the burner head out. Replace it with the new burner, and reinstall the cap and grate. This is an OEM part sourced directly from the manufacturer.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Will Not Start
This part works with the following products:
Range, Cooktop.
This part works with the following products:
General Electric.
Part# WB16K10062 replaces these:
AP3993829, 1262620, WB16K10044
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tim Falconer
March 11, 2022
Flame very uneven mostly on one side of burner
For model number JGBP87DEM2WW
Hello Tim, Thank you for your inquiry. The burner head could be clogged or off center. Take it out and clean the burner head with a wire brush and paper clip to remove any debris from the burner. The other causes could be there is an obstruction in the tube or burner valve, the burner cap is not aligned correctly or has warped, or the pressure regulator is not working correctly. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Customer Repair Stories
 Average Repair Rating: 5.0 / 5.0, 3 reviews. What's this?
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
The Burners and Burner Caps were missing
Very simple repair. I bought the Range without the Burners and Burner Caps. So all I had to do was to purchase the Burners and the Burner Caps and drop them in. Wish everything in life would be that simple.
Other Parts Used:
Small Burner - 5K Burner Head - Large - 12K Burner Head - Medium - 9500 Burner Cap Burner Cap - Black - Medium - 9500 BTU Burner Cap - 5000 BTU - Black Burner Cap - 15K VENTURI 15K LP
  • Alejandro from Newark, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
27 of 49 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
burner had hot spots where the matieral melted some cause a distorted flame that would spit sputter
Remove the top grate and remove the top burner plate and then pull the burner out and remove the torx screw and adapter install onto the new burner and place back on the stove , good to go.
Other Parts Used:
  • Dan from WARROAD, MN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
flame was inconsistent. too much air.
replaced old with new.
Other Parts Used:
  • Raymond J. from EASTPORT, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
5.0
Filter By Rating:
  • 5 Stars
    1
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS1480987
Manufacturer Part Number: WB16K10062
Brand
Model Number
Description
General Electric
C2S980SEM1SS
Range - Dual Fuel
General Electric
C2S980SEM2SS
Range
General Electric
C2S980SEM3SS
Range
General Electric
C2S980SEM4SS
Range
General Electric
C2S980SEM5SS
Range
General Electric
C2S980SEM6SS
Range
General Electric
C2S985SET1SS
Range
General Electric
C2S985SET2SS
Range
General Electric
C2S985SET3SS
Range
General Electric
C2S985SET5SS
Range
General Electric
C2S985SET6SS
Range - DUAL FUEL RANGE
General Electric
C2S985SET7SS
Range - DUAL FUEL RANGE
General Electric
C2S985SET8SS
Range - DUAL FUEL RANGE
General Electric
C2S985SET9SS
Range - DUAL FUEL RANGE
General Electric
CC2S985SET1SS
Range
General Electric
CC2S985SET2SS
Range
General Electric
CC2S985SET3SS
Range
General Electric
CC2S985SET4SS
Range
General Electric
CC2S985SET5SS
Range
General Electric
CC2S985SET6SS
Range
General Electric
CC2S985SET7SS
Range
General Electric
CC2S985SET8SS
Range
General Electric
CCGS985SET1SS
Range
General Electric
CCGS985SET2SS
Range
General Electric
CCGS985SET3SS
Range
General Electric
CCGS985SET4SS
Range
General Electric
CCGS985SET5SS
Range
General Electric
CCGS985SET6SS
Range
General Electric
CCGS985SET7SS
Range
General Electric
CCGS985SET8SS
Range

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service