Average Repair Rating: 5.0 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Screeching noise when starting the washing cycle. Especially with heavy loads.
The belt in this model is underneath the washing machine. Disconnect water lines and power cords, set up the drain hose in a bucket to avoid water spilling on the floor, tip the washing machine on its back, remove two bolt screws holding the plastic covering the belt, remove the old belt, and install the new one.
Other Parts Used:
Armando from UNION CITY, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ken
November 4, 2021
What is the procedure for installing the PS12578772 drive belt
For model number MVWC565FW2
Hello Ken, Thank you for the question. Here is a link for a How to Video on replacing the Drive Belt. The appliance may not be the same but will have the same basic steps. We hope this helps!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Denise
August 8, 2022
My washer is not spinning my cloths well, they are still soaking wet. It makes loud noise while spinning. I can turn the drum with no resistance, wondering if it's the belt or something else. Also is this hard to do yourself?
For model number WTW5000DW2
Hi Denise,
Thank you for your question. If your washer is does not spin well, you may have a damaged or worn belt or the belt is slipping off the wheel. If the belt is slipping off, reposition it. If it is worn or broken, you will need to replace it. The part number listed under your model number for the belt is PS12578772. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Paulette
November 24, 2022
The oven do not work whirlpool product parts number is 9760422 can you please let me know if you have this parts.i am not sure if it is the temperature sensor not working, turn on it flash f3e2 can you please help to let me know. Thank you
For model number Werp3100ps 3
Hi Paulette, thank you for contacting us. F3E2 means that your oven thinks your oven sensor is shorted. This is either a bad oven sensor or a bad display relay control board. You cannot test the board, but you can test the sensor. Open the door and remove the 3-4"-long, thin metal rod attached to the back wall. Remove the two screws that hold the sensor in place, and then pull the sensor forward until you can disconnect it. With a multimeter, check the resistance of the sensor at room temperature, it should be about 1080 ohms. If you get a reading that is far off from that, replace the sensor, part number PS11749737, otherwise, you need to replace your relay control board. Customer service is available 7 days a week if you need help placing an order. Glad to be of assistance!
The washer works fine except for a high-pitched squeal near the spin cycle. Generally, it only happens once a wash but now and then it will happen twice in the same wash. Would replacing the belt fix this or should I go with the clutch assembly as well?
For model number WTW6120HW0
Hello Timothy, thank you for contacting us. According to our research, the issue is most probably with the drive belt, part number PS12578772. It connects the drive motor to the drive system in the washer to spin the basket. A damaged drive belt can cause the dryer to be noisy. You may need to replace it to fix the issue. We hope this helps!
Was this helpful?
Thank you for voting!
Steven
October 31, 2019
Can I use the belt part number w11239857 on this machine. Tried to install too tight without loosening parts
For model number WTW4855HW1
Hello Steven, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS12578772 but has been updated by Whirlpool so may appear different. Hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
This is a replacement clutch assembly or cam kit for your washer. The clutch assembly is mounted on the drive shaft on the bottom of your washer. You may need to replace the clutch assembly if the splines on the clutch a...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS12578772
Manufacturer Part Number: W11239857
