11025132412 Kenmore Washer - Overview

Diagrams for 11025132412

See every part. Know exactly what you need.

Parts for the 11025132412

Touch-Up Paint - White – Part Number: 72017

Part #72017

This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, and freezers. This is a genuine OEM part and includes a brush applicator. Please remember to wear gloves to protect your hands when applying this paint.

$39.32

Drive Hub Kit

★★★★★

(38)

Part #W10528947

This drive hub kit helps your washer spin and agitate properly by connecting the basket to the motor. If your washer isn’t spinning, is noisy, or wobbles too much, this part might be the fix. It’s a simple DIY repair with easy-to-follow instructions and usually includes everything you need to get your washer working again.

$53.48

Washer Drive Pulley

★★★★★

(20)

Part #W10721967

If your washer is noisy, spins slowly, or leaves clothes soaking wet, this splutch cam kit might be the fix. It helps your machine switch between washing and spinning by connecting the motor to the basket. The kit includes everything you need—clutch parts, pulley, gear, and more—but make sure it fits your model before ordering. It’s a simple repair that can get your washer back to working like new.

$178.47

Washing Machine Door Lock Assembly

★★★★★

(17)

Part #W11307244

This lid switch assembly is for a top load washer. The lid switch assembly detects if the washer lid is open or closed and prevents the washer from spinning when the lid is open.

$70.81

Shift Actuator - 6 Pin

★★★★★

(12)

Part #W10913953

This 6-pin shift actuator is a genuine replacement part designed for use in select washing machines. It plays a critical role in controlling the movement of the transmission, allowing the appliance to switch between agitation and spin cycles. Engineered for durability and precision, the actuator ensures smooth transitions between wash pha...Read more

Read less

$157.74

Suspension Rod Kit

★★★★★

(18)

Part #W11130362

This suspension rod kit is a genuine OEM replacement kit that is compatible with various models of washing machine. The kit is responsible for supporting the inner tub of the washing machine and absorbing any excessive vibrations and movement caused during the washing and spinning cycles. This helps to protect the tub and interior of the ...Read more

Read less

$9.85

Screw, 8-16 x 1.000

Part #WP8533953

Sold individually.

$37.25

Washer Drain Hose

★★★★★

(4)

Part #W11244231

The drain hose carries used water from the washer to your house drain.

$15.68

Hose Clamp

Part #WP285655

This hose clamp is sold individually.

$34.05

STRIKE

★★★★★

(3)

Part #W10837741

$101.69

Water Inlet Valve

★★★★★

(10)

Part #W11038689

This inlet valve is a genuine replacement component designed for use in various washing machines. It regulates water flow by opening and closing the hot and cold water channels during the wash cycle, ensuring proper fill levels and cycle performance. The valve includes a wire harness for easy electrical connection and operates as an elect...Read more

Read less

$12.05

Washer Washplate Screw

Part #W10752187

Questions And Answers for 11025132412

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:

Michael - For model number 11025132412

March 17, 2023

Where is the grease come from out the bottom on the floor

Hi Michael, thank you for reaching out. According to our research, the issue is most probably related to the gearcase. It might not be properly sealed due to a loose rivet or the inside of the gearcase transmission system rubber seal may be worn out. We hope this information is useful!

Was this helpful?

Donna - For model number 11025132412

November 7, 2024

How do u get the bolt off inside the tub? It's making grinding noise when washing

Hello Donna, thank you for reaching out. To locate the Washplate screw PS10064547, reach inside the agitator to grab the plastic dust cap with your fingers and lift it from the agitator. Some agitators do not have caps, in which case you can safely skip this step. Connect an 8- to 10-inch socket extension to a socket wrench. Attach a 1/2 inch or a 7/16 inch socket to the extension. Insert the socket into the agitator to remove the agitator bolt from inside the agitator. Reach your fingers beneath the agitator and lift it from the machine. We hope this helps. Please contact us anytime if you require further assistance.

$12.05

Washer Washplate Screw

Was this helpful?

Common Symptoms of the 11025132412

How this model fails, and the parts that fix it.