This freezer door gasket is a genuine replacement component designed to create a secure seal when the door is closed, helping maintain consistent internal temperatures and energy efficiency. Finished in white, it prevents warm air from entering the freezer and keeps cool air contained, reducing frost buildup and ensuring optimal food preservation. Common signs of a worn or damaged gasket include difficulty closing the door, temperature fluctuations, frost accumulation, or visible leaks. Installation requires removing the existing screws and carefully aligning the new gasket into place. Compatible with select freezer models, this OEM part is sold individually and ensures a precise fit and reliable performance.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Georges L - July 25, 2018
Verified Purchase
Easy repair
Fits perfectly in place for this freezer. Easier if door is removed.
★★★★★
★★★★★
Annie S - October 21, 2022
Verified Purchase
Fit well
Good fit and real easy to change
★★★★★
★★★★★
Shilo H - December 1, 2020
Verified Purchase
Fast arrival, works great.
We got the freezer gasket in good time and it installed easily. Right part, works perfect. :)
★★★★★
★★★★★
Lise L - April 29, 2021
Verified Purchase
Over an hour installation..
Part received on time ..just make sure the gasket is not stiff ..use hair dryer to remove creasses.Freezer door seals perfect.Thank you.
★★★★★
★★★★★
Todd R - October 24, 2024
Verified Purchase
Great fit! Greatly reduced frost buildup.
Delivery was prompt. The seal was in good condition. I completely removed the plastic door shelving system on the freezer door which made installing the seal a bit easier (it took about 30 minutes total). I had completely defrosted the freezer and since installing the new seal, the frost buildup is minimal. I'm very happy with my experience. Thanks!
★★★★★
★★★★★
William C - June 24, 2020
Verified Purchase
Fridgidaire Freezer Door Gasket
Item came quickly, installed relatively easily, and works great.
★★★★★
★★★★★
Zulma G - October 2, 2018
Verified Purchase
yes
needed a hair dryer to straighten gasket , fit fine , sealed great . thank you.
★★★★★
★★★★★
Serge T - September 23, 2022
Verified Purchase
It fits well
For the most part it fits well but the corners where not easy the get aligned perfectly
★★★★★
★★★★★
Julian G - September 29, 2023
Verified Purchase
Gasket was kinked
Gasket was kinked, therefore did not seal the freezer. Frost problem continues
October 28, 2023
Thank you for your review. Please accept our apologies for this situation. We will be in touch with you shortly regarding your order.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.1 / 5.0, 14 reviews.
What's this?
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Gasket old and leaking
This freezer has many screws that hold the cover on the back of the door and assist clamping the edge of the gasket in place. Be sure to just loosen the screws 3/4 the way out, use a flat head screw driver to pry the cover from the door in case over time it is stuck to the door. The new gasket will come in a creative box trying not to kink the gasket itself, but there will be some distortion of the gasket when you get it. Put it in the sun or in hot water. I put it in my dryer for 10 minutes. Remove the old gasket, and start at the top of the door to replace the gasket. TIPS: If the screws are backed out enough, there should not be any problem sliding the back part of the gasket under the cover. When on the sides, do not pull the gasket down to make it easier to slide the gasket underneath the cover. This will distort and lengthen the gasket so it will not fit and thin it out so it will not function well. Once the gasket is in place, tighten the screws being sure to feel along the outside edge of the gasket for any bulging that would indicate that portion of the gasket is NOT under the cover properly.
Other Parts Used:
Thomas from RIXEYVILLE, VA
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
112 of 119 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
freezer not cold
took door of removed gasket replaced
Other Parts Used:
Marion from Jamestown, NY
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
70 of 202 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Frost inside freezer.. Old door gasket leaking.
Pretty straight forward. Loosen all screws "but do not remove" pry door panel from door just enough to slip gasket behind panel. Make sure gasket is seated properly around door.. Tighten all screws snug...
Gasket may not seal right away due to being kinked from packaging, use a little heat on gasket witth hairdryer and push something heavy against door over night. The gasket will straighten out over night.
Other Parts Used:
Eric from SEVIERVILLE, TN
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
21 of 21 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Freezer is 17 yrs old so needed a new gasket. The results were poor since the new gasket would not allow the door to seal.
Removed the numerous screws and took the door panel off. Cleaned and dried it. Replaced the insulation and hung the penal with 2 screws at the top and sides. Started to fit the gasket under the edge of the panel and put on the screws as I went across the top then down the sides finishing across the bottom. Perfect fit but could not get the door to seal at all. Went out and bought a new freezer(did I say it was 17 yrs old?!?!).
Other Parts Used:
Richard from CARY, NC
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
13 of 14 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Gasket shipped in box, could never get wrinkles out, freezer leak, ice formed on for and freezer,. Could have saved $150.00 + by not trying gasket.
Purchased new freezer.
Other Parts Used:
mary from Hallettsville, TX
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Screw drivers
10 of 13 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Original magnetic door seal no longer sealing & showing gaps. Freezer running continuously. Getting ice buildup around door frame & inside top of freezer.
I originally ordered an aftermarket replacement seal off intranet at half the price. It came in poor packaging & crumpled in a ball when received. After install, it would not seal & worse than the old seal that was replaced. I removed poor quality seal & returned it. I then ordered the OEM seal from PartSelect. It came in proper packaging. I kept the inside door shelving in place with two mid screws. Beginning at top I inserted sealing grove into channel of shelving working all the way around door frame. Making sure there was no crinkles or bulges at one place & it was all even. I replaced all screws ensuring not to over tighten. Close door and made sure magnetic seal pull closed to freezer & door on both sides by sliding my finger all the way around. I did not open the door for 1 hour to ensure rubber seal had taken proper shape to freezer frame. After I worked door Open/Close many times. Door seal worked perfectly every time then and now. This is a perfect example why to buy quality parts the first time.
Remove door remove old gasket, put new seal in dryer for 10 minutes to help it shape better then install new gasket with about 50 screws
Other Parts Used:
John from LAKELAND, FL
Difficulty Level:
Really Easy
Total Repair Time:
1- 2 hours
Tools:
Screw drivers
8 of 8 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Hard to get under metal strip.
Took out screws completely then had to wedge gasket underneath. Gasket comes a little tangled in box should remove immediately and keep at room temp till ready to use.
Other Parts Used:
Anthony from Conway, SC
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers, Socket set
8 of 9 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door wouldn't stay shut or seal.
Layed the seal out in the driveway in the sun to warm it up. Unscrewed the screws, not all the way. Removed old seal. Stared at the top corner, working our way around, making sure corners lined up. Don't pull on the seal or you will stretch it. Once it's applied and all corners are lined up, tighten crews down lightly. The seal mediately stuck but it took a few hours for the vacuum to suck it down. Easy breezy!
Other Parts Used:
Shilo from TALALA, OK
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
7 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The temperature displayed on the control panel was erratic
The replacement of the Thermistor is a snap. Take out the bottom two shelves, remove the 8 screws in the back panel, pull it out. Cut the wires to the old thermistor and install the new one. There are demo's on you tube so I wont go into detail.
Unfortunately the replacement door seal was packaged with twists in it and would not lay flat on the door. I found the old seal was not the problem - but instead ice had grown between the door and the door panel so that the door would not seal properly. I reinstalled the old door seal and everything is fine now.
Ask our experts a question about this part and we'll get back to you as soon as possible!
25 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jenny
September 10, 2017
Does this seal have a magnet in it??
For model number F82U20F3W0
Hi Jenny,
Thank you for your inquiry. Most gaskets have a magnetic strip so that the gasket can magnet to the appliance when the door is closed, however this is not how the gasket will install. This particular gasket is sandwiched between the door panels. You don't have to take the door apart, just unscrew the panels enough so that you can push the gasket into place. Good luck with your repair.
29 people found this helpful.
Was this helpful?
Thank you for voting!
Jerry
August 5, 2019
What is the size of gasket
For model number 25328042804
Hello Jerry, thank you for your question. This replacement Door Gasket for your model is approximately 66 x 31.5 inches. Good luck with your repair!
21 people found this helpful.
Was this helpful?
Thank you for voting!
Carolyn
August 30, 2017
My freezer sweats really bad on front of door causing water to leak onto floor. Is that from a faulty gasket?
For model number AFFU2066DW3
Hi Carolyn,
Thank you for the question. Yes when the door is sweating it is recommend that you replace the gasket.
Good luck with the repair!
18 people found this helpful.
Was this helpful?
Thank you for voting!
Ruth
February 21, 2018
Door ajar alarm is continually going off and there is no suction when the door is shut. It used to forcibly pull and suction the door to the freezer body. Making it really hard to open the door. That is now gone. Gasket looks good and appears to seal all the way around. Freezer temps are good. There is sweating on the outside of the freezer but freezer is located outside. We have replaced the light switch and computer module. Would replacing the gasket fix this door ajar issue? Or is there some other part that helps with the suction and seal?
For model number LFFH21F7HWG
Hello Ruth, thank you for your question. If the computer module part number 297366300 has been replaced and the alarm is still sounding I would recommend replacing the gasket. The new gasket may create a better seal and may disable the alarm when the door is sealed well. I hope this helps!
16 people found this helpful.
Was this helpful?
Thank you for voting!
John
July 31, 2019
Is it recommended to remove the freezer door before replacing the gasket, just as well to leave door on? Seems like easier to remove the door, and then install gasket, thank u for ur feedback
Hi John,
Thank you for your question. Here is a link to one of our YouTube videos that you may reference on how to install a door gasket, https://www.youtube.com/watch?v=H_YGyLUT564. The refrigerator in the video may not show exactly like the one you have, but it will give you a general idea on how to install the part. I hope this helps. Thank you and have a great day!
10 people found this helpful.
Was this helpful?
Thank you for voting!
Ruth
February 21, 2018
Can a lack of suction seal cause the door ajar alarm signal?
For model number LFFH21F7HWG
Hi Ruth,
Thank you for your question. Generally that will be caused that noise to happen is because your door switch is not realizing that the door is closed. If your gasket is not sealing correctly against the cabinet and activating the switch, that could be the reason why it is beeping. If your gasket is sealing against your cabinet then it may be your door switch that is the issue. I hope that helps. Good luck with your repair.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Susan
July 8, 2021
Can i get a door gasket for this upright freezer
Model 28042 Kenmore
For model number 28042 kenmore
Hi Susan,
Thank you for your question. The part number listed under your model number for the freezer door gasket is PS11770643. If you would like to place an order for it, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Louise
September 18, 2022
Freezer sets on covered porch. BUT it did the same as follows even in the house. It will starts to melt when door is open, and freeze back. But even when the door is closed for long periods it just keeps building up Ice starting from the top shelf and top of inside door then keeps working it way down freezing up with Ice around all the food. Until you have to defrost it. As soon as you plug it up IT STARTS ALL OVER AGAIN ! You can hear the suction of the door closing when you first defrost it and is hard to pull the door open to put food back it. Still shuts good even when it Ices OVER. I put tape on it & have a heavy drum against door thinking it was not staying closed. It still freezes up NEVER STOPS & then freezes the door shut. Could it still be the seal ? Or something else.THANKS Louise
For model number GFU21M4AW2
Hello Louise, thank you for your question. We have researched your model and found that the issue is probably with the Door Gasket, part number PS447460. If you require assistance to place an order, please contact customer service. We hope that helps!
What temperature number is best to set at to avoid ice build up?
For model number Ul5000ECw4
Hello Joshua, thank you for reaching out. According to our research, the fresh food compartment should be set to 37 degrees Fahrenheit, and the freezer should be set to 0 degrees Fahrenheit. We hope this is helpful!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Lynn
March 9, 2020
Will this gasket fit a freezer with the model number 25323024102?
For model number 25323024102
Hello Lynn,
Thank you for your question. Yes, this freezer gasket is compatible to your model. We hope this helps.
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Having a problem with a funky-smelling washing machine, or one that just doesn't seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This powerful washing help...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Freezer","title":"Freezer","url":"/Freezer-Parts.htm"},{"position":2,"name":"Seal or Gasket","title":"Seal or Gasket","url":"/Freezer-Seals-and-Gaskets.htm"},{"position":3,"name":"5304507199","title":"5304507199","url":""}]
