Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Ronald F - February 12, 2024
Verified Purchase
back in action
part arrived quickly easy install no more leaks....would buy again but hope i don't have to
★★★★★
★★★★★
Nicholas M - September 30, 2021
Verified Purchase
Quick and simple repair
Took me 30 mins to swap the inlet valve out.
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ray
June 20, 2023
Water slowly leaks into washer tub overnight. Intake valves or pressure sensor?
For model number EFLS517SIW0
Hi Ray, thank you for reaching out. Based on the description that you have provided, we would recommend replacing the inlet valve assembly, part number PS11766077. If the water inlet valve fails, it will let the water leak into the washer tub. We hope this solves your problem!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Joel
July 11, 2023
Have an E11 error code on my washer (meaning it’s slow to fill with water). Purchased this valve to repair it but now getting an E35 error and a loud noise when water filling. Is there a different sensor that should be replaced instead? Thank you
For model number EFLS527UIW1
Hi Joel, thank you for the question. According to our research, E35 error code indicates that the washer drum is over filling. We would recommend replacing the water level pressure switch, part number PS11766131, to fix the issue. We hope this helps!
Fabric softener remains in dispenser. Tried cleaning out the dispenser holes and didn’t work. Looking to replace the water valve assembly next?
For model number EFLS617STT0
Hi Anthony, thank you for reaching out. Before replacing the water valve assembly, we would suggest putting the vinegar in the detergent dispenser and run any cycle with no clothes. If the issue persists, you may need to replace the detergent dispenser, part number PS2358659. We hope this solves your problem!
Soap and softener do not go out of dispenser every wash cycle
For model number EIFLW55HMB0
Hello Larry, Thank you for the question. In most cases this is caused by a build up of soap. We suggest removing the trays and clean any build up preventing the water from rinsing the soap from the dispenser. We hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.