Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Marty
January 10, 2020
Replaced electrical control item 12 on schematic ,still reading f1 on oven,what else can it be or did I do something wrong ?
For model number whirlpool oven
Hi Marty. I would contact the manufacturer directly as replacing the control board should fix it.
Thank you for your question and good luck with your repair!
Was this helpful?
Thank you for voting!
Darrell
January 23, 2020
Stove works oven lights up f2, constant beep. If its control board, your price is over 400.00 dollars. I have several rentals and have always liked Whirlpool
For model number wfe5110soaso
Hello, Thank you for your question. Here is the information we have on that error code, F2 - Oven Temperature Is Too High - Check for welded contacts on bake and broil relays. If present, replace control board (clock). For SELF CLEAN models, check door lock operation. Check sensor, sensor harness, and the sensor harness connection at sensor and oven control. Also check for any causes of high resistance in the oven temperature sensor circuit. Remember: The oven control board (clock) measures resistance of sensor circuit, not actual oven temperature. We hope this helps.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.