Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John
October 21, 2021
the rinse aid fill does not empty the level is always full
For model number ADB1400AGS1
Hello John, thank you for your question. Hard water or detergent buildup may be clogging the dispenser, or the dispenser itself is bad. The rinse aid dispenser can be cleaned by using a turkey baster to suck out the dispenser tank. Then remove the cap of the dispenser and run a full hot cycle. This should clear any clogs. If this does not work, we recommend replacing the rinse aid dispenser. Part number PS11754648. We hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Ellen
December 18, 2018
I have a 4 year old dishwasher that we don't use very often but in feb. Of this year i replaced the rinse dispenser as it just didn't seem like it was working and now again it seems the silverware is getting spotted - what could be the problem as the rest of the machine works great
For model number MDB4709PAB2
Hello Ellen, thank you for your question. We would recommend checking the spray arms to see if the holes are clogged with any debris. You may also want to check the Accumulator and Filter
PartSelect Number: PS897295 and Turbidity Sensor PartSelect Number: PS11757214. These parts help keep the water clean so the dishes come out clean. Also be sure the rinse aid is kept full. I hope this helps!
Was this helpful?
Thank you for voting!
Rachel
March 2, 2020
The plastic piece on the door to the soap reservoir that allows it to latch closed broke on my dishwasher. What part do i need to replace to fix this?
For model number ADB1400AGW1
Good Day Rachel. Thank you for your question in regards to your unit (Model Number ADB1400AGW1). If it is attached to the door itself then based on our research, you likely will need to replace the Inner Door (PartSelect Number PS12074066). You can order this part either online at our website www.PartSelect.com or by calling us by phone at 888-260-4310. Best Regards.
