Whirlpool/Whirlpool_Thumb/TOTRVH5G.gif
See part 30 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.ca

Belt

★★★★★
★★★★★
1 Review
$70.33   In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS11748884
Manufacturer Part Number WPW10136934
Manufactured by Whirlpool
Troubleshooting
This part fixes the following symptoms:
Noisy | Will not tumble
This part works with the following products:
Dryer.
This part works with the following products:
Maytag, Whirlpool.
Part# WPW10136934 replaces these:
AP6015603, W10136934
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

2 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Leroy
    February 17, 2018
    How do replace this part
    Hello Leroy, Thank you for your inquiry. Lift up the lint screen cover to access the two screws, if you have the type of lint screen that has the cover built into it, just pull it out and remove the screws. Using a putty knife, insert it under the top about two inches from each corner to release the locking tabs, make sure you are going above the two bottom tabs in the release mechanism to hit the center release. Lift up the top and use a flat blade screwdriver to release the clip of the door switch. Using a 5/16 inch nut driver, remove the screws that hold the front panel on. Lift it up then pull the panel out to pull it off the latches at the bottom. In order to get the belt off the motor pulley, press the pulley towards the outside of the dryer, then take the belt off the pulley. Once it is off the pulley, you can pull it off the drum and put the new one on. Make sure the belt has no kinks or twists in it, then slide it onto the drum, sliding it back to the original position. Lift up on the idler pulley and push it towards the side of the machine, then create a loop in the belt, which you can pull over the motor pulley. Put the front panel back on by lining it onto the latches on either side and pushing down, lift the drum and line it to the front of the panel and re-attach the screws. Reconnect the door switch, press the top back into place on the locking tabs and replace the screws. Hope this helps!

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Tim
    December 19, 2019
    I have a noise, took idler pulley off the belt, belt looks ok, but I cannot get tension on the belt now.
    For model number MEDB400VQ1
    Hi Tim, Thank you for your question. If the belt is not getting any tension, there may be an issue with the idler pulley and you will need to either adjust it or replace it. We hope this helps. Thank you and have a great day!

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
      Customer Repair Stories
       Average Repair Rating: 2.8 / 5.0, 1 reviews. What's this?
        Sort by:
        Sorry, we couldn't find any existing installation instruction that matched.
        metal rubbing sound at drum edge: found seal cut and idler bearing frozen
        Getting the cabinet open is always fun. Prying the top open without breaking the clips. I took a small pry bar, covered the end with gray tape and found the the clips located on the front outer edges. You push in on the metal clips from the front and lift the top off the plastic alignment dowels. Remove the back, and two front panels. Removed the drum and vacuumed out everything (inspect). Remove old seal, idler pulley assembly from back of dryer (spring & bolt & note belt routing). Glue new felt seal on drum, slide on drive belt, bolt on new idler assembly & attach spring. Attach lower inner front panel screws. Flex out front panel and lower in the drum (make sure the felt seal lip is not folded over). Complete installing front panels. Slide belt towards center of drum (see old mark). Flex idler assembly and route drive belt. Hand spin drum to align belt. Plug in and run dryer briefly to confirm things run smoothly. Align lid clips and close. Unplug and attach back panel and vent hose. ALL DONE.
        Other Parts Used:
        Idler Pulley Wheel and Arm SEAL
        • GARY from CEDAR CITY, UT
        • Difficulty Level:
          A Bit Difficult
        • Total Repair Time:
          30 - 60 mins
        • Tools:
          Nutdriver, Pliers, Screw drivers, Socket set
        7 of 8 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
          Customer Reviews
          Average Rating:
          ★★★★★
          ★★★★★
          1 Review
          5.0
          Filter By Rating:
          • 5 Stars
            1
          • 4 Stars
            0
          • 3 Stars
            0
          • 2 Stars
            0
          • 1 Star
            0
            Sort by:
            Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
              Model Cross Reference
              This part works with the following models:
              PartSelect Number: PS11748884
              Manufacturer Part Number: WPW10136934
              Brand
              Model Number
              Description
              Maytag
              7MMGDB850WL0
              Dryer - GAS DRYER
              Maytag
              7MMGDB850WL1
              Dryer - 27" GAS DRYER
              Maytag
              7MMGDB950AG0
              Dryer - 27" Gas Dryer
              Maytag
              7MMGDB950AG1
              Dryer - 27" GAS DRYER
              Maytag
              MEDB200VQ0
              Dryer - RESIDENTIAL DRYER
              Maytag
              MEDB200VQ1
              Dryer - 27" ELECTRIC DRYER
              Maytag
              MEDB400VQ0
              Dryer - RESIDENTIAL DRYER
              Maytag
              MEDB400VQ1
              Dryer - 27" ELECTRIC DRYER
              Maytag
              MEDB700BW0
              Dryer - DRYER
              Maytag
              MEDB700VQ0
              Dryer - RESIDENTIAL DRYER
              Maytag
              MEDB725BW0
              Dryer - 27" ELECTRIC DRYER
              Maytag
              MEDB750YW0
              Dryer - 27" ELECTRIC DRYER
              Maytag
              MEDB750YW1
              Dryer - 27" ELECTRIC DRYER
              Maytag
              MEDB750YW2
              Dryer - 27" ELECTRIC DRYER
              Maytag
              MEDB800VB0
              Dryer - RESIDENTIAL DRYER
              Maytag
              MEDB800VQ0
              Dryer - RESIDENTIAL DRYER
              Maytag
              MEDB800VU0
              Dryer - RESIDENTIAL DRYER
              Maytag
              MEDB850WB0
              Dryer - 27" ELECTRIC DRYER
              Maytag
              MEDB850WB1
              Dryer - 27" ELECTRIC DRYER
              Maytag
              MEDB850WL0
              Dryer - 27" ELECTRIC DRYER
              Maytag
              MEDB850WL1
              Dryer - 27" ELECTRIC DRYER
              Maytag
              MEDB850WQ0
              Dryer - 27" ELECTRIC DRYER
              Maytag
              MEDB850WQ1
              Dryer - 27" ELECTRIC DRYER
              Maytag
              MEDB850WR0
              Dryer - 27" ELECTRIC DRYER
              Maytag
              MEDB850WR1
              Dryer - 27" ELECTRIC DRYER
              Maytag
              MEDB850YG0
              Dryer - 27" ELECTRIC DRYER
              Maytag
              MEDB850YG1
              Dryer - 27" ELECTRIC DRYER
              Maytag
              MEDB850YG2
              Dryer - 27" ELECTRIC DRYER
              Maytag
              MEDB850YW0
              Dryer - 27" ELECTRIC DRYER
              Maytag
              MEDB850YW1
              Dryer - 27" ELECTRIC DRYER

              Get in touch, we're here to help!

              Open until 1am EST

              Contact Customer Service