The idler pulley wheel serves to help the belt to rotate the drum. This arm is what attaches to the idler pulley wheel.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Noisy | Drum Not Spinning
This part works with the following products:
Dryer.
This part works with the following products:
Maytag, Whirlpool, Kenmore.
Part# WPW10547292 replaces these:
AP6022817, 8547160, W10547292, WPW10547292VP
Customer Reviews
Average Rating:
★★★★★
★★★★★
46 Reviews
4.9
Filter By Rating:
5 Stars
41
4 Stars
5
3 Stars
0
2 Stars
0
1 Star
0
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
RICHARD L - December 18, 2021
Verified Purchase
Very Good
everything works fine Thank you
★★★★★
★★★★★
Brad B - January 7, 2019
Verified Purchase
Part swap
Quick change out. Works like new.
★★★★★
★★★★★
Gary C - January 25, 2020
Verified Purchase
Very easy repair. Accessible through the rear panel below the drum. Spring loaded with one bolt and easy to replace.
Part was a perfect fit. Noise was not corrected but it was a start in diagnosing. For your dryer, check the drum support wheels for noise as well. Replaced four of mine and dryer is like new.
★★★★★
★★★★★
Clement F - February 25, 2023
Verified Purchase
Easy replacement
This is the second time I have to replace the idler pulley. We've tolerated the squeaky then noisy dryer for too long now. I wish a ball bearing version would be available to provide a longer useful life. With our usage, the idler wheel will last a few years before a squeaky wheel is audible. Very easy to reach and to replace the worn out part.
★★★★★
★★★★★
RON N - October 14, 2023
Verified Purchase
It is exactly what I needed
The part came as expected and worked perfectly
★★★★★
★★★★★
Jean R - February 25, 2023
Verified Purchase
Easy repair
Received the part quickly, same part as original. The dryer works great and saved a lot by doing it my self.
★★★★★
★★★★★
Dave P - November 14, 2018
Verified Purchase
Very easy fix
Service was great. Part was perfect. Took the back off and had new part installed in less than 10 minutes
★★★★★
★★★★★
Harvey P - March 17, 2023
Verified Purchase
Good product
Good product arrived on time save a lot of money instead of buying a new dryer
★★★★★
★★★★★
Sandro T - February 22, 2024
Verified Purchase
Worked as expected
Squeaky noise gone. Dryer repaired
★★★★★
★★★★★
Cheryl R - April 7, 2021
Verified Purchase
Idler and pulley wheel and arm
The part was in good condition and didn’t take that long to get here.
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 4.0 / 5.0, 8 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
metal rubbing sound at drum edge: found seal cut and idler bearing frozen
Getting the cabinet open is always fun. Prying the top open without breaking the clips. I took a small pry bar, covered the end with gray tape and found the the clips located on the front outer edges. You push in on the metal clips from the front and lift the top off the plastic alignment dowels. Remove the back, and two front panels. Removed the drum and vacuumed out everything (inspect). Remove old seal, idler pulley assembly from back of dryer (spring & bolt & note belt routing). Glue new felt seal on drum, slide on drive belt, bolt on new idler assembly & attach spring. Attach lower inner front panel screws. Flex out front panel and lower in the drum (make sure the felt seal lip is not folded over). Complete installing front panels. Slide belt towards center of drum (see old mark). Flex idler assembly and route drive belt. Hand spin drum to align belt. Plug in and run dryer briefly to confirm things run smoothly. Align lid clips and close. Unplug and attach back panel and vent hose. ALL DONE.
Removed rear cover. Released tension on spring to pulley to remove belt from pulley. Used a socket to remove idler. Did the reverse to install.
Other Parts Used:
Randall from MILLSAP, TX
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Socket set
6 of 8 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Idler pulley squeaking very badly
Took back panel of dryer off completely disconnected the drive belt to drum of dryer took off old idler pulley reinstall the new pulley and belt works like a brand new dryer
Other Parts Used:
Andy from DAGGETT, MI
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Socket set
6 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Squel with heavy load
Well before ordering parts. I removed back panel with screw gun to locate issue noise. The I applied a real quilty spray lube to the tensioner an spun it a few times. Then put dryer back together and ordered parts. I'm waiting for the noise to return before I actually make the repair. Old saying if it's not broke don't fix it.
Simply removed back cover on dryer and the idler pulley wheel and arm was right there and only had one screw to remove after relieving tension on belt by removing spring. Very simple
Other Parts Used:
Jasper from FLORIEN, LA
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set, Wrench (Adjustable)
5 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken dryer belt and broken idler pulley wheel
Looked it up on YouTube and followed the video instructions. Repair went fine after I got the correct parts ordered from two different places before I got the correct parts. Parts Select was the only one that sent the correct parts.
Quick Boil burner would not stay heated and did not reach the required temperature.
The repair was easy. Shut off all power to the range, or unplug it. Remove the sheet metal back from the control panel using a nut driver or socket set. Pull the knob from the front of the control panel. Remove the two Phillips head screws that were hidden behind the knob. Pull the control switch out the back side of the control panel. Compare the old switch with the new one, to make absolutely sure you have the correct switch. Remove one wire at a time from the old switch and immediately install it in the exact same position on the new switch. When you have successfully transferred all of the wires from the old switch to the new switch, reinstall the new switch using the two Phillips screws. Reinstall the knob and the sheet metal cover. Plug the range back in, and/or turn the power back on. Trying boiling a pan of water to confirm that the repair resolved the issue.
Other Parts Used:
Ronald from NOVI, MI
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Pliers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
9 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Thomas
November 24, 2017
I believe i have to change the pullie, my machine started to squeal. Do i need the arm or just the wheel. Also how hard will it be to change.
For model number WED8600YW0
Hi Thomas,
Thank you for your inquiry. The pulley for your appliance is sold with the arm. There is a video on our website that you can reference on how to install the pulley. It may not show the exact pulley for your appliance, but it will give you a general idea on how to install it. You will find the video under part number. If they dryer is still noisy after installing the pulley, There are some parts that you will need to check to see which one is causing the issue. You will need to check the, drum support rollers, the belt and the drum support roller shafts. I hope this helps. Thank you and have a great day!
14 peoplefound this helpful.
Was this helpful?
Thank you for voting!
Phyllis
November 26, 2017
My dryer has a loud squealing noise when it is turned on. If I move the drum by hand it also squeals. I have found some references to this noise that it is probably the dryer idler pulley. Does it make sense that this is the problem?
For model number WGD8600YW0
Hello Phyllis,
Thanks for your question. There are a few different parts you will want to examine, depending on where the noise is coming from First we would advise to check the blower belt and the drum belt to see if they are damaged or worn. Also examine the drum support rollers for signs of wear and tear. The idler pulley arm is also a common cause and should be checked for wear and tear - the drive belt is commonly replaced alongside the pulley.
If all else fails, the drive motor could be the cause, but this is rarely the case.
I hope this helps.
Do you remove the front or back of the unit to install a new idler pulley #wpw10547292
For model number WED7800XW0
Hello Mike, thank you for your question. The easiest way to access that idler pulley is from the back. I hope this helps!
3 peoplefound this helpful.
Was this helpful?
Thank you for voting!
James
December 16, 2021
What size idler pulley dose this dryer have
For model number MEDB400VQ0
Hello, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11756154 and the Pulley Wheel is about 2" in diameter. We hope this helps!
1 personfound this helpful.
Was this helpful?
Thank you for voting!
Thomas
June 26, 2019
This part shows pulley attached to the arm. My dryer has a replaceable pulley. I ordered and installed a new belt and it appears the belt is now rubbing on the edge of the pulley arm and shredding. Any thoughts on what my issue may be?
For model number WED8200YW0
Hello Thomas, Thank you for the question. This sounds like the arm might be bent and not sitting level causing the belt to rub or the pulley will need to be replaced. Hope this helps!
1 personfound this helpful.
Was this helpful?
Thank you for voting!
Carl
December 28, 2017
Why does the idler pulley not have a bearing, and does not require lube or grease, per another person's question? A metal bushing on a metal shaft does not seem like the best solution. Do the new parts come with a bearing?
For model number MEDB200VQ1
Hi Carl, Thank you for the question. No the new parts do not come with a bearing. The manufacture (Whirlpool) did not design them to require a bearing to lube. Good luck with the repair!
Was this helpful?
Thank you for voting!
Larry
January 29, 2018
Can I replace only the idler pulley from the rear of my bravos dryer cabinet?
For model number MEDB400VQ1
Hi Larry, Thank you for the question. The Pulley is only sold as part of the Idler Pulley Wheel and Arm assembly. Hope this helps!
Was this helpful?
Thank you for voting!
Marc
December 24, 2017
Does the idler pulley come pre-greased/lubricated?
For model number MEDB850WQ1
Hi Marc, Thank you for the question. No, it does not come pre-greased or lubricated. Grease or lubricate is not required for the Idler Pulley Arm. Good luck with the repair!
Was this helpful?
Thank you for voting!
Valarie
September 5, 2023
I need a pulley idler
I can not find this # for part
For model number WED8200YW0
Hi Valarie, thank you for getting in touch. The part you are looking for is the idler pulley wheel and arm, part number PS11756154. Glad to be of assistance!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Having a problem with a funky-smelling washing machine, or one that just doesnt seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This powerful washing helpe...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
