Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Marjo P - March 22, 2019
Verified Purchase
prompt delievery
The part is in (very easy to install) and the appliance is up and running. Will highly reccomend your service
★★★★★
★★★★★
Stacey M - November 20, 2018
Verified Purchase
Easy Repair
This was just what we needed and the dryer is back up and working great! Thanks!
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 5.0 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
F01 Error Code
At first, my dryer would just make a clicking noise but would not start. After some research, I unplugged it to try to 'reset' it and after that, I noticed the F01 error. Some quick research on the internet you can find the source of the error is a failed machine board. Some DYI people soldered the part where the connection broke but, I chose to just buy the new part. I was pretty confident where the error was and did not want to waste time and the cost of a repair man visit. I followed the instructions on the most thorough YouTube video and removed the top of the dryer, took pictures of the control board wires and began the removal process. The insertion fo the new board took about 1 minute. All in all, the physical work took my husband and I about 10 minutes. Research was about an hour and I had the part shipped overnight. This website has saved me hundred of dollars and lots of wasted time trying to find a repair man when Covid has made it difficult to get anyone to your house. Our washer sprung a leak during the initial lockdown and we were able to fix that ourselves as well. My only comment about the part is that the chime at the end of the cycle is very different. I have yet to find out if I can change that but it is not too bothersome. I love this website and its products!
Other Parts Used:
Carrie from WEXFORD, PA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Socket set
6 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
19 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Carlos Torres
July 21, 2017
My dryer is giving an f01 code and won't start drying. I tried to reset it by disconnecting it but it will shut down as soon as i try to dry. Gives the f01 code then shuts off. I need the electronic control board, correct?
For model number MEDZ600TK2
Hi Carlos. Yes, you are correct that the f01 code is an indication that you need a new electronic control board. I've run your model number through our system and you are in the right place, part #:PS11748354 is what you will need to fix this symptom. I hope this helps, and good luck with the repair.
13 people found this helpful.
Was this helpful?
Thank you for voting!
Joan
October 8, 2017
F01 code flashes on my Whirlpool dryer duet sport and will not start?
For model number WED8300SW2
Hi Joan,
Thank you for your question. That error code indicates that the machine control board has failed. This could have been caused by a power surge. Sometimes when you disconnect the power for 5 minutes it will reset the board. If you plug it in an the error code still persists, then you will have to replace your control board. Good luck with your repair.
10 people found this helpful.
Was this helpful?
Thank you for voting!
Carmine
February 11, 2018
Is the control board the actual computer and where is it located?
For model number wgd8300sw2
Hello Carmine,
Thanks for your question. Yes, the control board is the computer portion of the appliance. It is located behind the control panel. To access it, unplug your appliance, and then you would need to remove the top panel and control board bracket.
I hope this helps.
3 people found this helpful.
Was this helpful?
Thank you for voting!
LUIS LOPEZ
April 23, 2018
My dryer machine is not working,and i got an error code f01 ,so my question is ,do i have to change the electronic control board even if is not burnt?
For model number WED8300SW0
Hi Luis,
Thank you for your question. In most cases you do not have to replace the electronic control board when an F01 code appears. The error may be caused by a power surge. You may be able to clear the code by unplugging the dryer for 5-10 minutes. If you plug the dryer back in and the code is not displayed, then the electronic control board is fine. If you plug it back in and the code appears again, then you will need to replace it. I hope this helps. Thank you and have a great day!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Leslie
July 16, 2019
I have a Kenmore elite dryer and the control panel does not light up and the dryer will not operate. There is power as the light turns when the door opens
For model number 110.C85872400
Hello Leslie, thank you for writing. This sounds like a faulty Electronic Control Board. The replacement for your model is part PS11746365. Good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Espi
April 3, 2019
My dryer is giving an f01 code and won't start drying. Do you think i need the electronic control board?
For model number MEDZ600TW2
Hello Espi, Thank you for the question. The F01 indicates a failed electronic machine control board. This error code can sometimes be caused by a glitch or power surge through the electrical lines. You may be able to clear this code by unplugging the washer for 5 minutes.Thank you for your inquiry, good luck with this repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Dennis
November 25, 2019
This is Dennis again re Kenmore dryer. Would replacing the control board solve the problem? What part number?
For model number 110.86562501
Hello Dennis, Thank you for contacting us. I have researched the model you have provided and have found the most commonly replaced part for this issue is the Electronic Control Board, PartSelect Number PS11748354. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Brad
January 17, 2020
I believe that i need a new control board (f01 error code). Can you confirm the part number for our Whirlpool duet sport dryer?
For model number YWED8300SW2
Brad, The F01 indicates a failed electronic machine control board. This error code can sometimes be caused by a glitch or power surge through the electrical lines. You may be able to clear this code by unplugging the washer for 5 minutes. If that does not fix the issue then yes you may have to replace the Control Board.
Was this helpful?
Thank you for voting!
Jean-Marc
October 29, 2019
Existe-t'il une copie ou reconditionnee moins cher$
For model number W111606
Bonjour Jean-Marc, Merci pour la question. Désolé, nous ne vendons que des pièces d'origine. Rien après le marché ou utilisé. J'espère que cela t'aides!
Was this helpful?
Thank you for voting!
Dennis
November 24, 2019
My Kenmore he2 dryer digital readout doesn’t respond correctly to the physical turning of the settings dial. For example, some days it will be stuck on only the “normal” dry setting. I assume I need to replace the control board. Which part would I need?
For model number 110.8656*
Hello, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the complete model number of the unit. 110.8656 is incomplete. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
