Washer Front Leveling Foot WPW10001130

Official part for Whirlpool, Kenmore, KitchenAid, Maytag

★★★★★
★★★★★
(3)

Easy 

1- 2 hours 

Install video
11747965-1-M-Whirlpool-WPW10001130-Washer Front Leveling Foot
Part Location Diagram of WPW10001130 Whirlpool Washer Front Leveling Foot
See part 34 in the diagram
Replacing your Whirlpool Washer Washer Front Leveling Foot
( Grid squares measure 1x1 inch )
11747965-1-S-Whirlpool-WPW10001130-Washer Front Leveling Foot 11747965-2-S-Whirlpool-WPW10001130-Washer Front Leveling Foot 11747965-3-S-Whirlpool-WPW10001130-Washer Front Leveling Foot Part Location Diagram of WPW10001130 Whirlpool Washer Front Leveling Foot Replacing your Whirlpool Washer Washer Front Leveling Foot
Proudly Canadian
OEM badge Official OEM Part
$9.85
In Stock
Order within the next 4 hrs and your part ships today!
 Fits your 3LA5580XSW0!

About This Part

What it does. Why it matters. Everything you need to know for an easy fix.

Washer Front Leveling Foot Specifications

Sold Individually.
Part #WPW10001130
Manufactured by Whirlpool for Whirlpool, Kenmore, KitchenAid, Maytag

You May Also Need

Because heroes deserve fewer surprise re-installs.

$9.85
In Stock
$26.85
Special Order
$34.95
In Stock
$29.95
In Stock
$35.15
In Stock
$35.95
In Stock
$35.15
In Stock

Genuine OEM: Original Parts. Lasting Repairs.

Because quality isn't optional.

OEM stands for Original Equipment Manufacturer. This means that the company who made your appliance is also supplying the replacement part.

How Buying OEM Parts Can Save You Time and Money
Features OEM Generic
Genuine brand name
Guaranteed to fit
Superior Quality
Long term value

Part Videos

Watch our pros, then fix it yourself.

Replacing your Whirlpool Washer Washer Front Leveling Foot

Replacing your Whirlpool Washer Washer Front Leveling Foot

About this fix

Common problems and models this part fixes.

Easy 

1- 2 hours 

Rated by verified customers

What this part fixes:
  • Shaking and Moving
Works with the following products:
  • Washer
  • Trash Compactor
  • Washer Dryer Combo
  • Dryer
Part# WPW10001130 replaces these:
AP6014700, 14210041, 21031, 22003545, 3-5087, 3-89102, 3359453, 386047, 388094, 388743, 389102, 41001098, 675021, 7-75526, 775183, 775526, 776101, 80014, 8182826, W10001130 , WPW10001130VP, Y389102, Y775526 Show less

Customer Reviews

Real ratings from other people who bought this part.

Average Rating:

★★★★★
★★★★★
3 Reviews
4.7

Out of 5

  • 5 Stars
    2
  • 4 Stars
    1
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0

Search reviews left by others. DIY doesn't mean you have to do it alone. Use simple keywords like "fit", "broken", "easy", or "quality" to find reviews that match!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
  • 1
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Billy P - January 7, 2024
  Verified Purchase
Easy to install, worked perfectly.
Part came fast and was able to install easily. Great experience.
★★★★★
★★★★★
MARION S - July 22, 2022
  Verified Purchase
Perfect feet
Excellent. The two feet came in good time, and I was able to put them on myself. With the new feet it make the washing machine look a lot better not sitting on the floor any more. Thank you.
★★★★★
★★★★★
Ashton S - March 26, 2023
  Verified Purchase
It’s okay,
Not bad part lil high priced food what it is.
  • 1

Repair Tips

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!

Easy 

1- 2 hours 

Average repair rating from 6 real customers like you

Sort by:
  • 1

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sorry, we couldn't find any existing installation instruction that matched.
Bearings went out in the drum.
57 of 81 people found this instruction helpful.
  • Paddy from Ferndale, WA
  • A Bit Difficult
  • More than 2 hours
  • Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
purchased the bearings at Napa auto parts for 16$. Over all it was a little difficult to get the bearings out and back in. Used a brass drift to drive them out and to seat them back in..
Was this helpful?
Thank you for voting!
washer not rotating
23 of 176 people found this instruction helpful.
  • kaine from butler, PA
  • A Bit Difficult
  • 30 - 60 mins
  • Nutdriver, Pliers, Screw drivers, Wrench set
Washer not rotating, removed the control head and back cover. Then removed body housing around tube to get to the bottom. had to replace coupling on motor then removed the agitator tower and replaced the Parts for the tower agitator. unit is 16 years young and still looks and runs new, put a total of 55 dollars into repair and it should be good for a long time. This is with a family of five. Washing 2 loads everyday.
Read less
Was this helpful?
Thank you for voting!
Broken water inlet syphon combined with missing feet was causing water to spill out of the washer
17 of 36 people found this instruction helpful.
  • Randy from Atlanta, GA
  • A Bit Difficult
  • 1- 2 hours
  • Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)
I removed the back of the washer, removed the old water inlet syphon, replaced it with the new one, and, with some difficulty, replaced the back of the washer, reattaching all of the parts to it.
Was this helpful?
Thank you for voting!
No agitation, No spin, pump OK
7 of 7 people found this instruction helpful.
  • Ernest from Midlothian, VA
  • Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
I was familiar with the Kenmore / Whirlpool direct drive mechanism but at first I could not determine how to release the console. I finally found the end cap trim pieces would pop off revealing the 2 screws that hold the console in place. After removing them the console flips up and over the backboard. I then removed the 2 clips that hold the cabinet to the backboard, unpluged the lid switch connector and then tipped the entire cabinet forward and off the frame. This gives you access to the entire washing machine mechanism.
Next I released the 2 metal clips that hold the pump on and push it out of the way leaving the hoses connected. Next I released the 2 clips that hold the pump on, these clips also have a screw to secure them. I was then able to set the motor to the side without removing any wires.
The coupling parts had broken and were already off of the motor shaft and the input drive shaft of the transmission. I put the new drive parts on and had to tap them down untill they were flush with the end of the shafts. I then put the rubber coupling on the transmission drive end and aligned the motor drive to mate into the other holes in the coupling as I put the two back together. I then re attached the 2 motor clips with screws and reinstalled the pump with it's clips. I then reinstalled the cabinet onto the frame and replaced the cabinet clips. I then plugged in the lid switch connector and flipped the console back over and screwed it down. I then reinstalled the trim caps that had me stumped to begin with. The unit tested out OK.
Read less
Was this helpful?
Thank you for voting!
Front legs were rotted.
1 person found this instruction helpful.
  • Cindie from DUNMORE, PA
  • Really Easy
  • 15 - 30 mins
  • Wrench (Adjustable), Wrench set
Replace front legs. Very easy fix.
Was this helpful?
Thank you for voting!
Bought a washer without front leveling feet
1 of 3 people found this instruction helpful.
  • Rick from Lennon, MI
  • Really Easy
  • Less than 15 mins
  • Wrench (Adjustable)
The repair was simple as you can imagine. Thought I could buy these legs at any big box store or at least at the local hardware store. No such luck. Partselect had the right product---easy to order and easy to install. Things around here are great.
Was this helpful?
Thank you for voting!
  • 1

DIY Questions and Expert Answers

3 questions answered by our Repair Experts.

Ask our experts a question about this part and we'll get back to you as soon as possible!

We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jane - For model number 11047512602
June 3, 2019
Would this foot front leg fit on back of machine? I have no back legs on machine there gone.I am renting a home the machine was left here without legs.Washer works but need legs.
Chris Boyle Profile
Hello Jane, thank you for inquiring. This is also the Back Leg, and is compatible to your washer.
3 people found this instruction helpful.
Was this helpful?
Thank you for voting!
Will - For model number Maytag LA510
October 11, 2019
What size (diameter) is the post? Is thread size 13 tpi?Thanks
Chris Boyle Profile
Hi Will, thank you for your question. Unfortunately we do not have the thread size. However this part is photographed on a 1 inch grid background. So the post is about 3/8" thick. However this part is not the correct part for your appliance according to the model number you provided. I have linked the correct part below for you. Good luck with your repair.
$25.37
In Stock
Adjustable Leveling Leg
1 person found this instruction helpful.
Was this helpful?
Thank you for voting!
Michael - For model number HAV4657EWW REV
February 15, 2022
Machine moves and rocks unevan to the right. It appears sometime
Chris Boyle Profile
Hello Michael, Thank you for the question. We suggest checking the Suspension Springs to see if there need to be replaced or have come undone. This package contains a new set of six springs. The suspension springs in your washer connect to the bottom of tub, and help to hold it in place. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
$90.93
In Stock
Suspension Springs - Kit of 6
1 person found this instruction helpful.
Was this helpful?
Thank you for voting!
  • 1

This Part Also Fits These Models

Don't see your model? Use our Fit Checker to confirm!

Check Part Fit
Part #WPW10001130
Brand
Model Number
Description
Kenmore
10682872600
Washer - Kenmore Washing Machine Model 106.82872600 (10682872600, 106 82872600) Parts
Kenmore
11010202000
Washer
Kenmore
11010202001
Washer
Kenmore
1101050299
Washer - Kenmore Washing Machine Model 110.1050299 (1101050299, 110 1050299) Parts
Kenmore
11010502990
Washer
Kenmore
11010502991
Washer
Kenmore
11010852990
Washer
Kenmore
11010852991
Washer
Kenmore
11012202100
Washer
Kenmore
11012502100
Washer
Kenmore
11012852100
Washer
Kenmore
11013202200
Washer
Kenmore
11013212200
Washer
Kenmore
11014102300
Washer
Kenmore
11014112300
Washer
Kenmore
11014202300
Washer
Kenmore
11014212200
Washer
Kenmore
11014222300
Washer
Kenmore
11014502300
Washer
Kenmore
11014852300
Washer
Kenmore
11015732400
Washer
Kenmore
11015842400
Washer - Kenmore Washing Machine
Kenmore
11015852400
Washer
Kenmore
11015862400
Washer
Kenmore
11015864400
Washer
Kenmore
11015942400
Washer
Kenmore
11015942401
Washer
Kenmore
11015944400
Washer
Kenmore
11015944401
Washer
Kenmore
11015952400
Washer
Washer Front Leveling Foot
$9.85
In Stock
✖
Stock Status

In Stock

Item is in stock and is estimated to be delivered in 2-3 business days via Standard Shipping.

On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.