Maytag/Maytag_Thumb/IFMSPDID.gif
See part 34 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 10PM EST

customerservice@partselect.ca

Foot, Front - Single

$8.61   In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11747965
Manufacturer Part Number WPW10001130
Manufactured by Whirlpool
Product Description

Foot, Front - Single Specifications

Sold Individually.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Shakes and moves
This part works with the following products:
Washer, Trash Compactor, Washer Dryer Combo, Dryer.
This part works with the following products:
Whirlpool, Kenmore, Maytag, KitchenAid.
Part# WPW10001130 replaces these:
AP6014700, 14210041, 21031, 22001915, 22003544, 22003545, 22003546, 305087, 3359453, 386047, 388094, 388743, 389102, 41001098, 675021, 775183, 775526, 776101, 80014, 8182826 ... Show more , W10001130, WPW10001130VP, Y389102, Y775526 Show less
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

2 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Jane
    June 3, 2019
    Would this foot front leg fit on back of machine? I have no back legs on machine there gone.I am renting a home the machine was left here without legs.Washer works but need legs.
    For model number 11047512602
    Hello Jane, thank you for inquiring. This is also the Back Leg, and is compatible to your washer.

    2 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Will
    October 11, 2019
    What size (diameter) is the post? Is thread size 13 tpi?Thanks
    For model number Maytag LA510
    Hi Will, thank you for your question. Unfortunately we do not have the thread size. However this part is photographed on a 1 inch grid background. So the post is about 3/8" thick. However this part is not the correct part for your appliance according to the model number you provided. I have linked the correct part below for you. Good luck with your repair.

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Related Parts:
      Part Videos

      Replacing your Whirlpool Washer Foot, Front - Single

      Customer Repair Stories
       Average Repair Rating: 2.9 / 5.0, 6 reviews. What's this?
        Sort by:
        Sorry, we couldn't find any existing installation instruction that matched.
        Bearings went out in the drum.
        purchased the bearings at Napa auto parts for 16$. Over all it was a little difficult to get the bearings out and back in. Used a brass drift to drive them out and to seat them back in..
        56 of 80 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        washer not rotating
        Washer not rotating, removed the control head and back cover. Then removed body housing around tube to get to the bottom. had to replace coupling on motor then removed the agitator tower and replaced the Parts for the tower agitator. unit is 16 years young and still looks and runs new, put a total of 55 dollars into repair and it should be good for a long time. This is with a family of five. Washing 2 loads everyday.
        20 of 173 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Broken water inlet syphon combined with missing feet was causing water to spill out of the washer
        I removed the back of the washer, removed the old water inlet syphon, replaced it with the new one, and, with some difficulty, replaced the back of the washer, reattaching all of the parts to it.
        • Randy from Atlanta, GA
        • Difficulty Level:
          A Bit Difficult
        • Total Repair Time:
          1- 2 hours
        • Tools:
          Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)
        17 of 36 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        No agitation, No spin, pump OK
        I was familiar with the Kenmore / Whirlpool direct drive mechanism but at first I could not determine how to release the console. I finally found the end cap trim pieces would pop off revealing the 2 screws that hold the console in place. After removing them the console flips up and over the backboard. I then removed the 2 clips that hold the cabinet to the backboard, unpluged the lid switch connector and then tipped the entire cabinet forward and off the frame. This gives you access to the entire washing machine mechanism.
        Next I released the 2 metal clips that hold the pump on and push it out of the way leaving the hoses connected. Next I released the 2 clips that hold the pump on, these clips also have a screw to secure them. I was then able to set the motor to the side without removing any wires.
        The coupling parts had broken and were already off of the motor shaft and the input drive shaft of the transmission. I put the new drive parts on and had to tap them down untill they were flush with the end of the shafts. I then put the rubber coupling on the transmission drive end and aligned the motor drive to mate into the other holes in the coupling as I put the two back together. I then re attached the 2 motor clips with screws and reinstalled the pump with it's clips. I then reinstalled the cabinet onto the frame and replaced the cabinet clips. I then plugged in the lid switch connector and flipped the console back over and screwed it down. I then reinstalled the trim caps that had me stumped to begin with. The unit tested out OK.
        • Ernest from Midlothian, VA
        • Difficulty Level:
          Easy
        • Total Repair Time:
          15 - 30 mins
        • Tools:
          Nutdriver, Screw drivers
        • Parts Used:
          WPW10001130, 285753A
        7 of 7 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Front legs were rotted.
        Replace front legs. Very easy fix.
        • Cindie from DUNMORE, PA
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          15 - 30 mins
        • Tools:
          Wrench (Adjustable), Wrench set
        • Parts Used:
          WPW10001130
        1 person found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Bought a washer without front leveling feet
        The repair was simple as you can imagine. Thought I could buy these legs at any big box store or at least at the local hardware store. No such luck. Partselect had the right product---easy to order and easy to install. Things around here are great.
        • Rick from Lennon, MI
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          Less than 15 mins
        • Tools:
          Wrench (Adjustable)
        • Parts Used:
          WPW10001130
        0 of 2 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
          Model Cross Reference
          This part works with the following models:
          PartSelect Number: PS11747965
          Manufacturer Part Number: WPW10001130
          Brand
          Model Number
          Description
          Kenmore
          10682872600
          Washer - Kenmore Washing Machine Model 106.82872600 (10682872600, 106 82872600) Parts
          Kenmore
          11010202000
          Washer
          Kenmore
          11010202001
          Washer
          Kenmore
          1101050299
          Washer - Kenmore Washing Machine Model 110.1050299 (1101050299, 110 1050299) Parts
          Kenmore
          11010502990
          Washer
          Kenmore
          11010502991
          Washer
          Kenmore
          11010852990
          Washer
          Kenmore
          11010852991
          Washer
          Kenmore
          11012202100
          Washer
          Kenmore
          11012502100
          Washer
          Kenmore
          11012852100
          Washer
          Kenmore
          11013202200
          Washer
          Kenmore
          11013212200
          Washer
          Kenmore
          11014102300
          Washer
          Kenmore
          11014112300
          Washer
          Kenmore
          11014202300
          Washer
          Kenmore
          11014212200
          Washer
          Kenmore
          11014222300
          Washer
          Kenmore
          11014502300
          Washer
          Kenmore
          11014852300
          Washer
          Kenmore
          11015732400
          Washer
          Kenmore
          11015842400
          Washer - Kenmore Washing Machine
          Kenmore
          11015852400
          Washer
          Kenmore
          11015862400
          Washer
          Kenmore
          11015864400
          Washer
          Kenmore
          11015942400
          Washer
          Kenmore
          11015942401
          Washer
          Kenmore
          11015944400
          Washer
          Kenmore
          11015944401
          Washer
          Kenmore
          11015952400
          Washer

          Get in touch, we're here to help!

          Open until 10PM EST

          Contact Customer Service