![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)
Screw
Fits your 59676503500 Refrigerator!
$9.89
In Stock
Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.
Fits your 59676503500 Refrigerator!
PartSelect Number
PS11747542
Manufacturer Part Number
WP98165
Manufactured by
Whirlpool
Product Description
Screw Specifications
This screw is a little under an inch long and is made of metal. It is used with a refrigerator's ice maker assembly. Sold individually.
![How Buying OEM Parts Can Save You Time and Money How Buying OEM Parts Can Save You Time and Money](https://img.youtube.com/vi/d6AvOkulk_g/maxresdefault.jpg)
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Refrigerator, Washer, Freezer, Air Conditioner.
This part works with the following products:
Amana, Kenmore, Whirlpool, Maytag.
Part# WP98165 replaces these:
0056268, 0312638, 12990504, 12990504V, 12990521, 14205659, 2-13648, 213648, 232127, 3-11608, 311608, 3400804, 4340259, 4340622, 4343675, 4355181, 4355326, 488246, 488401, 489088
...
Show more
, 489130, 5015-X, 59001952, 61001351, 650430, 67004822, 67006287, 67006473, 8208166, 8209240, 831490, 965198, 965259, 98038, 98042, 98165, 98368, 98673, 98783, A0229501, A3044101, M0211018, M1D596, R0130443, Y0056268, Y0312638
Show less
Customer Repair Stories
Average Repair Rating: 3.3 / 5.0, 2 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Hinge pin for drawer lid broke
1. Remove all drawers {3}, shelves {glass 1}, shelf support {1}. 2. Remove two {2} screws from End Cap. 3. Carefully remove End Cap and drawer temperature control part on the back wall keeping them aligned as installed. The part on the back wall swings out so that the tab on the left end of the piece may be withdrawn from the securing slot (hole). The two parts should be carefully removed while keeping the two parts at a right angle the way they are installed. The reason for this caution follows. 4. On the back side of both parts are plastic pieces that, I believe, can be easily broken if you are not aware. The pieces are connected together at the right angle. They are the control arms for the temperature control -- on right side End Cap only -- the left side doesn't have them or the rear part on the back wall. 5. The pieces must be disconnected and removed. You must examine and ponder how they are held in place and hooked together in order to disconnect and remove them without damaging them. The same advice is applicable to reinstalling the pieces in the new part -- End Cap. 6. After reassembled and keeping the two parts at a right angle, insert the tab on the left end of the back wall part into the slot (hole) and swing the two parts back into position. 7. Replace the screws. 8. Done, reinstall the shelf, shelf support, and the drawers. NOTE: I ordered the two screws but they were not needed.
Other Parts Used:
-
Lynn H from MILL CREEK, WA
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Socket set
4 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
leaky ice maker - non-stick coating had failed
replaced the entire ice make - 3 screws and a squeeze -off connector and it's out. Reverse to re-install... except that the fill tube had iced up. To thaw the fill tube: unload freezer section (leave food in fridge, but keep door closed), remove ice maker. Boil water, dip drill bit (dull end) into hot water, swirl around, insert (dull end) into to fill tube. Depending on how hot you got it, maybe a tablespoon of ice will melt. Repeat many times - fill tube is about 14" long! Do not use anything sharp - you will nick the tube and ice will form causing you to repeat this procedure. Do not try to break the ice - let the heat work. It took me about 30 minutes to thaw the whole thing - it made a nive gasping noise when the final plug opened up. Re-install ice maker.
Other Parts Used:
-
Robert from Sunnyvale, CA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver
4 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
James
August 15, 2019
What size allen wrench i need to tighten the screws on the door handle.
For model number MF1257OFEZ02
Hi James, thank you for your question. Unfortunately the manufacturer has not provided that information. However judging by the size of the screw, you may need a 1/4". Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Lee
May 11, 2023
what size is the screw on the back panel of the freezer?
For model number KRFC300ESS01
Hello Lee, thank you for contacting us. The back panel screw, part number PS1845599, is a 1/4-inch hex head screw. It measures approximately 0.5 inches in length and 0.25 inches in diameter. We hope this information helps!
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11747542
Manufacturer Part Number: WP98165
Manufacturer Part Number: WP98165
Brand
Model Number
Description
Amana
106-2G P54390-29R
Air Conditioner
- Amana Air Conditioner Model 106-2G P54390-29R (1062GP5439029R, 106 2G P54390 29R) Parts
![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)