This part sends enough current to the igniter to create a spark to the bottom of the burner cap.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Range, Cooktop.
This part works with the following products:
Whirlpool, KitchenAid, Roper, Kenmore.
Part# WP8053421 replaces these:
AP6011630, 8053421
Customer Repair Stories
Average Repair Rating: 5.0 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
No spark to any of the burners
I slid the range out about 8 inches from the wall, and having unplugged the range and looked at the diagram from the Parts Select site, I used a mirror and screwdriver to remove the screws holding the small rear cover. From there I removed the one screw holding the spark module and that way I was able to hold the old and new one side by side to move the wires. Reversed the process, easy peasy.
Other Parts Used:
William from DELANO, MN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Don
January 7, 2019
None of the 4 ignitors will light, is this the right repair part
For model number TGS325KQ0
Hello Don, Thank you for the question. If none of the burners work and they all stopped at the same time, the Spark Module, PartSelect Number: PS11753037 would be the most likely cause. Hope this helps, good luck with this repair!
On the gas stove top the right 2 burner ignitors started sparking when we started the oven. The first time , we shut the oven off by pressing the cancel button on the control panel they stopped sparking. We tried a second time and we had to unplug the stove. Would this be a wire harness issue or a spark module issue or a switch issue?
For model number YGKST307HB4
Hello Rick and thanks for writing.
One of the most common reasons a gas stove starts sparking is because the burner cap is out of alignment. Once the cooktop is completely cool, remove the burner grate to access the cap beneath it. Remove the cap and re-center it on the base. Try lighting the burner again. We hope this helps. Please contact us anytime.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.