Located in the clutch housing, this ring is used only to muffle any sound.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Washer, Washer Dryer Combo.
This part works with the following products:
Whirlpool, Kenmore, KitchenAid, Roper.
Part# WP63134 replaces these:
63134
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Charles
January 7, 2018
Two questions. Does this part look like a belt? We had a piece of rubber hanging under our washer. I initially thought it was a belt... the only item I see is the noise band. It says it fits in the clutch housing. the picture does not show clearly where this item goes. Is it necessary for the unit to run? I have ordered the clutch ring because the washer was not spinning.
For model number 11016962500
HI Charles, Thank you for the question. This ring is located in the clutch housing, this ring is used only to muffle any sound. It is made of rubber and is commonly mistaken for a belt but all it does is dampen the brake housing for sound purposes.The appliance will work without it but it will be noisy. Hope this helps!
8 people found this helpful.
Was this helpful?
Thank you for voting!
Patrick
January 21, 2024
If the sound deadening ring for ETW4400WQ1 model number becomes lose or worn can it cause a burning smell? We're getting s burnt rubber smell and this ring looks very worn.
For model number ETW4400WQ1
Hi Patrick, thank you for the question. The sound dampening ring, part number PS11743335, that you mentioned, can cause a burning smell. As it mounts on the brake shoe housing and absorbs the sound of the brake shoes rubbing on the housing. We would recommend replacing the sound dampening ring if it is damaged. Glad to be of assistance!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
This is a pack of three suspension pads for your washer. The suspension pads in your washer are found underneath the tub and prevent the rotating metal parts from grinding on one another. If your suspension pads are worn...
A worn clutch can cause a slower spin speed which will leave your clothes wet after a cycle. This clutch assembly comes with brake cam driver, blue spring for large capacity washers and black spring for compact washers. ...
This coupling kit is located between the motor and the transmission on direct drive washers with no belt. This is the newer version and is made with new metal sleeves for added strength.
The suspension spring supports the outer tub and keeps the tub steady during loads that could cause an unbalance. If this part breaks, is worn down or has stretched out and lost its spring, it could cause the load to be ...