Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Richard C - July 24, 2018
Verified Purchase
Easy repair.
It didn’t help. I bought a new Maytag.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.9 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Washing machine shakes violently during spin cycle
Removed four screws that hold the top control panel to the base and hung over the back panel in order to remove the main wrap-around body of the machine. Took off top plastic ring fastened to side of tub then removed old Balance ring. Installed new balance ring. Unfortunately, this did NOT fix the problem. This was a suggestion from Justanswer.com and failed miserably. Does anybody know how to fix this problem? And it's not the springs or the little plastic shims around the base OR the cross coupling to the motor...
Other Parts Used:
James from Asheville, NC
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
25 of 57 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Gene
March 11, 2019
Does this model also have suspension rods?
For model number LSW9700PQ2
Hello Gene, Thank you for the question. Checking the model number provided, this model does not have suspension rods. Hope this helps, good luck with this repair!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Larry
October 9, 2019
I have a out of balance spin cycle, think it's the balance ring, don't see anything else on the parts diagram or online it might be. Checked for stuff trapped under the blade thing. Does that sound good, also, how does the machine top come off to access the work area?
For model number LSQ9520LQ0
Hello Larry, thank you for inquiring. You will want to consider the Direct Drive Motor Coupling, part number PS1485646, and the Agitator Directional Cogs, part number PS388034 for your model as the cause. Yes, the washer's top does come off. We have a repair video for a model similar to yours that shows how to do this. Here is a link: https://www.youtube.com/watch?v=6dgVMOSu3V8. Good luck with your repair!
Was this helpful?
Thank you for voting!
Barry
August 13, 2019
Replace counter balance spring, suspension springs, drive block - still shakes? Would the balance ring correct the problem?
For model number ETW4300SQ0
Hello Barry, Thank you for the question. The next suggest parts would be the Tub Wear Pads PartSelect Number PS334620, Suspension Pads PartSelect Number PS334456 and Balance Ring, PartSelect Number PS11741965. You shoudl also check to make sure the leveling feet PartSelect Number PS11747965 and PartSelect Number PS334463 are level as well. Hope this helps!
The suspension spring supports the outer tub and keeps the tub steady during loads that could cause an unbalance. If this part breaks, is worn down or has stretched out and lost its spring, it could cause the load to be ...
This is a pack of three suspension pads for your washer. The suspension pads in your washer are found underneath the tub and prevent the rotating metal parts from grinding on one another. If your suspension pads are worn...
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Our scratch-free, streak-free formula removes fingerprints, smudges, grease, dirt and oil, while protecting and polishing to repel dust and dirt. Use on all stainless steel appliance brands and surfaces. Stainless Steel ...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11741965
Manufacturer Part Number: WP387240