Maytag/Maytag_Thumb/54992.gif
See part 5 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.ca

Basket-to-Centerpost Gasket

$38.63   Special Order

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your 6002A!
 Fits your 6002A!
PartSelect Number PS11741793
Manufacturer Part Number WP35-3685
Manufactured by Whirlpool
Troubleshooting
This part fixes the following symptoms:
Leaking
This part works with the following products:
Washer.
This part works with the following products:
Maytag, Admiral, Magic Chef, Norge.
Part# WP35-3685 replaces these:
35-2980, 35-3685
Questions and Answers

Be the first to ask our experts a question about this part!

Customer Repair Stories
 Average Repair Rating: 2.5 / 5.0, 3 reviews. What's this?
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
The unit was leaking during agitation and spin cycle
I had to remove the back lower panel with a nut driver (approximately 8 screws) as well as the front panel which is removed by poping the top of the unit removing 2 screws and swinging the panel down and lifting off.
Remove the bleach fill cap (pry off). You'll need a long extension on your ratchet to remove the bolt holding on the agitator. Next remove the inner tub which is held on by 4 bolts. The outer tub is a bit more difficult. You will need to remove all 4 shoulder screws from the top as well as the six that anchor it to the spring assembly around the bottom skirt. Since it was 7 years old I had to muscle the outer tub and rotate it to get around the inner tub transmission flange.
I'm not sure which of the 3 parts were leaking so I ordered and replaced all 3.
I don't know if it was necessary but I scraped and cleaned the aluminum flange plates where the gaskets seated.
At this point it was easy to replace the tub to housing gasket and tub/housing seal.
During reassembly I also replaced the basket to centerpost gasket.
I went with standard delivery but got the parts the next day.
Other Parts Used:
Tub to Housing Gasket Tub/Housing Seal
  • Dan from Grain Valley, MO
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers, Socket set
57 of 61 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer leaked entire load of water on the floor.
These gaskets and seals were relatively easy to get to. I replaced all 3. Put machine back together, but washer still leaked. I ended up having to remove more components down along the center shaft towards the transmission. I found that the "tub seal" was worn out. I also replaced the "seal nut assembly" and "O-ring" while I was at it. The seal nut and tub seal were more difficult to remove without the proper tool, but a bigger rubber mallet and strategically placed pliers were enough to break them loose. Once all parts showed up the washer went back together easily and it is now leak-free.
Other Parts Used:
Tub to Housing Gasket Tub/Housing Seal
  • Kevin from Wilton, CT
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Socket set
21 of 24 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
during wash cycle, water poured out of bottom of washer
first we looked at schematics on your web site to see what we thought was wrong and if we felt we could do ourselves. It appeared to be seals and gaskets, so we went for it and carefully took the washer apart. We ordered the parts, cleaned the parts we had such as the tub, and were all ready to put back together when the parts arrived. Again, using your pictures, we reasselbled and when we tested, it worked better than it had been in a long time. And we saved a large repair bill!
Other Parts Used:
Tub to Housing Gasket Tub/Housing Seal Top Tub Seal
  • Susan from Cloquet, MN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Screw drivers, Socket set
14 of 23 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11741793
Manufacturer Part Number: WP35-3685
Brand
Model Number
Description
Norge
6002A
Washer - WASHER
Norge
6002A REV A
Washer - Norge Washing Machine Model 6002A REV A (6002AREVA) Parts
Norge
6433A
Washer - WASHER
Norge
6440A
Washer - WASHER
Norge
6440A REV K
Washer - Norge Washing Machine Model 6440A REV K (6440AREVK) Parts
Norge
6443A
Washer - WASHER
Norge
6443A REV D
Washer - Norge Washing Machine Model 6443A REV D (6443AREVD) Parts
Norge
6443B
Washer - WASHER
Norge
6532A
Washer - WASHER
Norge
6532A REV G
Washer - Norge Washing Machine Model 6532A REV G (6532AREVG) Parts
Norge
6540A
Washer - WASHER
Norge
6540A REV K
Washer - Norge Washing Machine Model 6540A REV K (6540AREVK) Parts
Norge
6543
Washer - WASHER
Norge
6543 REV D
Washer - Norge Washing Machine Model 6543 REV D (6543REVD) Parts
Norge
6543A
Washer - WASHER
Norge
6544A
Washer - WASHER
Norge
6544A REV B
Washer - Norge Washing Machine Model 6544A REV B (6544AREVB) Parts
Norge
6640A
Washer - WASHER
Norge
6640A REV K
Washer - Norge Washing Machine Model 6640A REV K (6640AREVK) Parts
Norge
6643A
Washer - WASHER
Norge
6643A REV D
Washer - Norge Washing Machine Model 6643A REV D (6643AREVD) Parts
Norge
6643B
Washer - WASHER
Norge
6740A
Washer - WASHER
Norge
6741A
Washer - WASHER
Norge
6741A71
Washer - WASHER
Norge
6742A
Washer - WASHER
Norge
6742B
Washer - WASHER
Norge
6743
Washer - MAYTAG WASHER
Norge
6743A
Washer - WASHER
Norge
6743A REV D
Washer - Norge Washing Machine Model 6743A REV D (6743AREVD) Parts

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service